On Sat, Feb 24, 2018 at 4:40 AM, Stewart Samuels searider74@gmail.com wrote:
I just got a chance to test the 4.16.0-0.rc2 kernel using the 20180220 Xfce Rawhide Spin. It fails to boot due to a kernel paging request. Here are the snippets:
[ 8.028149] Unable to handle kernel paging request at virtual address fffffffc
Wow kernel, thanks, it's very useful :-/
Was there any further output after this? The kernel would normally spit out a full traceback right after this line.
There's some fixes for the exynos landed for rc3 so might be worth trying that one when it lands next week.
P
Stewart
On 02/22/2018 12:01 PM, Peter Robinson wrote:
On Thu, Feb 22, 2018 at 7:52 PM, Stewart Samuels searider74@gmail.com wrote:
On 02/22/2018 11:39 AM, Peter Robinson wrote:
On Thu, Feb 22, 2018 at 7:24 PM, Stewart Samuels searider74@gmail.com wrote:
Hi Peter,
I just got a chance to update my Odroid Xu4 with the latest updates for F27. All was working fine with the exceptions for the Exynos 5 USB-3 issues prior to this upgrade. After the upgrade and a reboot, my system no longer boots into graphics mode. It seems to be failing somewhere along the line with udev, but I am not certain of this. The system will eventually boot into non-graphics mode, which can be seen when connecting the serial port and watching the boot messages.
As I mentioned in previous posts, the Rawhide Spins all seem to have this issue too. In fact, they have had the problem for a long time now. On the positive side, both this release of F27 updates and the Rawhide spins do seem to have the USB-3 issues fixed.
Can you try the 4.16rc2 kernel [1] and see if that has the same issues. The 4.16 kernel might help as there was a bunch of stuff that changed in the exynos drm driver.
https://koji.fedoraproject.org/koji/buildinfo?buildID=1046448
Looking at the builds in this URL I see "rawhide" listed as one of the "Tasks". Doe this mean the current rawhide build are already including the kernel-4.16.0-0.rc2 kernel?
Yes, and the just branched F-28 will as well. So you can do an upgrade to F-28 and get it there too
Attached, is a MS Word formatted file of my boot log. Hope this helps.
Please don't do that, word processing docs are really not the way to handle this in open source just fpaste it or something. If it's booted just do "dmesg | fpaste" and provide the URL.
Regards, Stewart
On 02/12/2018 09:56 AM, Peter Robinson wrote:
Hi All,
Just a heads up that the 4.15 kernel is headed to stable releases.
I did a bunch of testing over the weekend and fixed up a bunch of issues, added some minor enhancements across a number of platforms. There is a kernel-4.15.2-301.fc27 build [1] which had all those fixes for people to test, I expect a 4.15.3 kernel going to updates-testing later today or tomorrow.
A few notes for the fixes I added:
- fixed cpufreq/thermal on i.MX6 (thanks kwizart for upstream fix)
- Crypto/rng engine on some AllWinner devices now loads/works
(A10/A143/A20 at least, I suspect more will come with later kernels)
- Exynos 5 USB-3 issue should now be fixed once and for all (I hope)
- A bunch of improvements for monitor detection on the Raspberry Pi
- Ethernet driver more stable on AllWInner A64/H5 platforms (like
Pine64)
- Numerous other upstream fixes improvements that headed upstream
- 4.15.3 (not in the build above) will include aarch64 fixes for
Spectre/Meltdown.
So please test and feel free to reply to this thread with any new issues you see with the 4.15 series, or any positive results.
[1] https://koji.fedoraproject.org/koji/taskinfo?taskID=24966088 _______________________________________________ arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org
arm mailing list -- arm@lists.fedoraproject.org To unsubscribe send an email to arm-leave@lists.fedoraproject.org