Am 04.05.21 um 16:58 schrieb Peter Robinson:
>>> U-Boot 2021.04 (Apr 28 2021 - 00:00:00)
>> U-Boot TPL 2021.04 (Apr 21 2021 - 00:00:00)
>> Channel 0: LPDDR4, 50MHz
>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>> Channel 1: LPDDR4, 50MHz
>> BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
>> 256B stride
>> lpddr4_set_rate: change freq to 400000000 mhz 0, 1
>> lpddr4_set_rate: change freq to 800000000 mhz 1, 0
>> Trying to boot from BOOTROM
>> Returning to boot ROM...
>>
>> U-Boot SPL 2021.04 (Apr 21 2021 - 00:00:00 +0000)
>> Trying to boot from MMC2
>>
>>
>> U-Boot 2020.10-1 (Oct 14 2020 - 10:43:46 +0000) Manjaro ARM
> Yep, so you probably need to disable the EMMC because it's loading it
> from the EMMC for some reason.
>
> If it loads to Fedora you can also run "dd if=/dev/zero
> of=/dev/mmcblkX bs=1M count=10" (update the mmcblkX to the right one)
> to zero out the beginning of the EMMC if you don't care about the
> contents of it.
> _______________________________________________
> arm mailing list -- arm(a)lists.fedoraproject.org
> To unsubscribe send an email to arm-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
>
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
>
https://lists.fedoraproject.org/archives/list/arm@lists.fedoraproject.org
> Do not reply to spam on the list, report it:
>
https://pagure.io/fedora-infrastructure
After "dd if=/dev/zero of=/dev/mmcblkX bs=1M count=10" I want to boot
with Fedora-Everything-netinst-aarch64-34-1.2.iso
How to boot from USB?
Message
U-Boot TPL 2021.04 (Apr 21 2021 - 00:00:00)
Channel 0: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 50MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 400000000 mhz 0, 1
lpddr4_set_rate: change freq to 800000000 mhz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2021.04 (Apr 21 2021 - 00:00:00 +0000)
Trying to boot from MMC2
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
U-Boot 2021.04 (Apr 21 2021 - 00:00:00 +0000)
SoC: Rockchip rk3399
Reset cause: RST
Model: Pine64 Pinebook Pro
DRAM: 3.9 GiB
PMIC: RK808
MMC: mmc@fe310000: 2, mmc@fe320000: 1, sdhci@fe330000: 0
Loading Environment from SPIFlash... SF: Detected gd25q128 with page
size 256 Bytes, erase size 4 KiB, total 16 MiB
*** Warning - bad CRC, using default environment
---cut---
Device 0: Vendor: Verbatim Rev: PMAP Prod: STORE N GO
Type: Removable Hard Disk
Capacity: 14808.0 MB = 14.4 GB (30326784 x 512)
... is now current device
Scanning usb 0:1...
---cut---
Usage:
dhcp [loadAddress] [[hostIPaddr:]bootfilename]
## Executing script at 00500000
Wrong image format for "source" command
SCRIPT FAILED: continuing...
=>
Hello
I didn't manage to boot Fedora-Everything-netinst-aarch64-34-1.2.iso
from USB, so I switched back to former Fedora Installation with modified
kernel.
I will try it later.
Andreas