Hi!
On Wednesday, 13 March 2024 at 16:17, Peter Robinson wrote:
> Whatever you decide, don't install 2023.10-rc3. It's
broken. I still
> haven't found the time to disassemble my PBP and put it into maskrom
> mode to recover. I'll probably have some time next week and will try
> to install 2023.10 final.
So I finally got time to look into this on my PBP and what's happened
is they're moved the offsets the u-boot.itb needs to be written.
So if you do the following for the SPI flash rather than the previous
one it should work:
sf update ${fdt_addr_r} E0000 ${filesize}
A nasty hack that may work is if you use the spi-flashing-disk to
setup a mSD card with the same version that's on the SPI flash it may
boot with that to a U-Boot prompt to save taking it to pieces.
spi-flashing-disk --media=/dev/sda --target=pinebook-pro-rk3399
Unfortunately, the above doesn't help. I still get:
U-Boot TPL 2023.10-rc3 (Aug 21 2023 - 00:00:00)
lpddr4_set_rate: change freq to 400MHz 0, 1
Channel 0: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
Channel 1: LPDDR4, 400MHz
BW=32 Col=10 Bk=8 CS0 Row=15 CS1 Row=15 CS=2 Die BW=16 Size=2048MB
256B stride
lpddr4_set_rate: change freq to 800MHz 1, 0
Trying to boot from BOOTROM
Returning to boot ROM...
U-Boot SPL 2023.10-rc3 (Aug 21 2023 - 00:00:00 +0000)
Trying to boot from SPI
Trying to boot from MMC1
mmc_load_image_raw_sector: mmc block read error
Trying to boot from SPI
Trying to boot from MMC2
Card did not respond to voltage select! : -110
spl: mmc init failed with error: -95
SPL: failed to boot from all boot devices
### ERROR ### Please RESET the board ###
Even with an SD card with the results of the above spi-flashing-disk
command with uboot-images-armv8-2023.10-0.4.rc3.fc39 installed.
Regards,
Dominik
--
Fedora
https://fedoraproject.org
Deep in the human unconscious is a pervasive need for a logical universe that
makes sense. But the real universe is always one step beyond logic.
-- from "The Sayings of Muad'Dib" by the Princess Irulan