On Wed, 13 Mar 2024 at 21:19, Dominik 'Rathann' Mierzejewski
<dominik(a)greysector.net> wrote:
Hi!
On Wednesday, 13 March 2024 at 16:17, Peter Robinson wrote:
> > Whatever you decide, don't install 2023.10-rc3. It's broken. I still
> > haven't found the time to disassemble my PBP and put it into maskrom
> > mode to recover. I'll probably have some time next week and will try
> > to install 2023.10 final.
>
> So I finally got time to look into this on my PBP and what's happened
> is they're moved the offsets the u-boot.itb needs to be written.
>
> So if you do the following for the SPI flash rather than the previous
> one it should work:
> sf update ${fdt_addr_r} E0000 ${filesize}
>
> A nasty hack that may work is if you use the spi-flashing-disk to
> setup a mSD card with the same version that's on the SPI flash it may
> boot with that to a U-Boot prompt to save taking it to pieces.
>
> spi-flashing-disk --media=/dev/sda --target=pinebook-pro-rk3399
Unfortunately, the above doesn't help. I still get:
I did say it might work, sorry, you'll probably have to do the hard recovery.