Hi,
> Hello together, hello Peter,
>
> I've on my Pinebook Pro U-Boot 2022.10.
>
> Howto:
https://nullr0ute.com/2021/05/fedora-on-the-pinebook-pro/
>
> Does it make sence to update U-Boot to up2date Version from Fedora 39
> (uboot-images-armv8-2023-07-3.fc39.noarch) ? Are there any significant
> changes ?
Whatever you decide, don't install 2023.10-rc3. It's broken. I still
haven't found the time to disassemble my PBP and put it into maskrom
mode to recover. I'll probably have some time next week and will try
to install 2023.10 final.
So I finally got time to look into this on my PBP and what's happened
is they're moved the offsets the u-boot.itb needs to be written.
So if you do the following for the SPI flash rather than the previous
one it should work:
sf update ${fdt_addr_r} E0000 ${filesize}
A nasty hack that may work is if you use the spi-flashing-disk to
setup a mSD card with the same version that's on the SPI flash it may
boot with that to a U-Boot prompt to save taking it to pieces.
spi-flashing-disk --media=/dev/sda --target=pinebook-pro-rk3399
I am going to update the details in the blog post to cover this, also
we can likely now move to a single command for flashing a combined
blob in F-40. Note I've also discovered a bug in the U-Boot menu if
booting off NVME, I am looking into that currently.
Peter