On Mon, Jan 26, 2015 at 4:40 PM, Robert Nelson <robertcnelson(a)gmail.com> wrote:
On Mon, Jan 26, 2015 at 4:14 PM, Frans Meulenbroeks
<fransmeulenbroeks(a)gmail.com> wrote:
> Follwup: I was unable to boot on beagleboard XM. I used the same offsets to
> write MLO and u-boot.img as for beaglebone, but apparently this is not ok as
> MLO is not even loaded.
> I have also examined another card that does boot and there the MLO also
> lives at a different location (actually there it is the first file in a VFAT
> FS, not sure if I can dd it on that same location on the boot filesystem in
> the FC21 image.
>
> If someone has done this and can provide some suggestions that would be
> greatly appreciated!
The omap34xx/omap36xx/DM3730 used on the BeagleBoard classic & xM...
Doesn't support RAW mode.. You need to create the vfat and copy the
MLO/u-boot.img/etc..
One more, side note, u-boot does now support "extX" boot for omap
targets, but you'd have to enable this for the BeagleBoard
classic/xM..
Regards,
--
Robert Nelson
http://www.rcn-ee.com/