Hi! ... please, someone can help me for the follow problem?
Many thanks!
------- Messaggio inoltrato -------
Da: Dario Lesca <d.lesca(a)solinos.it>
Rispondi-a: For users of Fedora Core releases <fedora-list(a)redhat.com>
A: Fedora Project List <fedora-list(a)redhat.com>
Oggetto: USB Ethernet adapters D-Link DUB-E100
Data: Wed, 14 Jun 2006 12:08:58 +0200
Hi, I must configure a External USB Ethernet adapters D-Link DUB-E100,
this is the my /proc/bus/usb/drivers info:
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=ff(vend.) Sub=ff Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=07d1 ProdID=3c05 Rev= 0.01
S: Manufacturer=D-Link Corporation
S: Product=DUB-E100
S: SerialNumber=000001
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=250mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=(none)
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=128ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=03(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
when I plug the adapters into USB port I get this dmesg info:
usb 1-2: new high speed USB device using ehci_hcd and address 5
usb 1-2: configuration #1 chosen from 1 choice
... but none happening.
I have found this web page
http://www.linux-usb.org/usbnet/
which say then this device is support from asix driver (and usbnet).
But if I modprobe this drivers none happening ...
the "ip addr" command not show a new net network device.
It is possible to use this device?
How I can configure this device?
Many thanks to all!
--
Dario Lesca <d.lesca(a)solinos.it>