Noone could help me on the fedora-list.
Maybe someone can help me on dev list.
Thanx.
Ciao, Gerhard
---------- Forwarded message ---------- Date: Sat, 10 Jan 2004 09:14:49 +0100 (CET) From: Gerhard Wiesinger lists@wiesinger.com Reply-To: fedora-list@redhat.com To: fedora-list@redhat.com Subject: Fedora Core 1 - Problem with apm suspend and halt
Hello!
I'm havind some problem with apm suspending and halt.
1.) apm suspend problem The problem is that apm goes into suspend when I work on the machine remotly with ssh. (At least it appears randomly to me some minutes after reboot or minutes to hours later. So there is no correlating time like 5 minutes or so after inactivity.)
But it is unusable in a server environment.
Network goes down and ssh connection is lost, no monitor signal available. The Power Led blinks afterwards. After pressing a key system is up again.
Jan 10 08:36:32 xxx kernel: ehci_hcd 00:10.4: suspend to state 3 Jan 10 09:38:25 xxx kernel: usb-uhci.c: interrupt, status 20, frame# 0 Jan 10 09:38:25 xxx kernel: usb-uhci.c: Host controller halted, trying to restart. Jan 10 09:38:25 xxx kernel: usb-uhci.c: interrupt, status 20, frame# 0 Jan 10 09:38:25 xxx kernel: usb-uhci.c: Host controller halted, trying to restart. Jan 10 09:38:25 xxx kernel: ehci_hcd 00:10.4: resume
As you can see time is also set wrong (I found that there is a compile time option of the kernel, but since I use local time in the BIOS it is set wrong and confuses ntpd).
2.) halt problem When shutting down the system with Ctrl alt del the same happens: ca::ctrlaltdel:/sbin/shutdown -t3 -h now
------------- Halting System Shuttting down ide devices: hda hdd System halted ------------- (Harddisk is shut down but Processor is still running and it shuts not down completly) After pressing a key it suspends to state 3 (Power LED blinks). ehci_hcd 00:10.4: suspend to state 3
After pressing a key again it starts again
System: Linux xxxx 2.4.22-1.2140.nptl #1 Tue Jan 6 20:20:25 EST 2004 i686 athlon i386 GNU/Linux Motherboard: Epox 8KRA2+ Processor: Athlon XP Barton 2600+
ACPI is enabled in the BIOS and power saving settings are BIOS default.
Occoured with all fedora kernels, even with Redhat 9.0 on a same equipped second machine.
Any ideas?
BTW: As far as I saw Nothbridge disconnecting is enabled by default, but STPGNT not (both were enabled in previous kernel versions). Has something changed here?
athcool stat athcool version 0.3.2 enabling/disabling Athlon Powersaving mode
VIA KT400[A] (1106 3189) found 'bus Disconnect when STPGNT detected' bit is disabled. 'VLink Auto-disconnect' bit is enabled.
Thank you for the answer.
Ciao, Gerhard
On Tue, 2004-01-13 at 16:01, Gerhard Wiesinger wrote:
Hello!
I'm havind some problem with apm suspending and halt.
1.) apm suspend problem The problem is that apm goes into suspend when I work on the machine remotly with ssh. (At least it appears randomly to me some minutes after reboot or minutes to hours later. So there is no correlating time like 5 minutes or so after inactivity.)
[snip]
System: Linux xxxx 2.4.22-1.2140.nptl #1 Tue Jan 6 20:20:25 EST 2004 i686 athlon i386 GNU/Linux Motherboard: Epox 8KRA2+ Processor: Athlon XP Barton 2600+
ACPI is enabled in the BIOS and power saving settings are BIOS default.
[snip]
Are you sure the kernel is using ACPI? If so then APM would be overriden automatically. Try adding 'acpi=on' or if necessary 'acpi=force' to the kernel entry on /etc/grub.conf ?
HTH,
Michel