F20 System Wide Change: SSD cache
by Jaroslav Reznik
= Proposed System Wide Change: SSD cache =
https://fedoraproject.org/wiki/Changes/SSD_cache
Change owner(s): Rolf Fokkens <rolf(a)rolffokkens.nl>
Using recent kernel (3.9 and later) features for (fast) SSD caching of (slow)
ordinary hard disks.
== Detailed description ==
Recent Linux kernels support the use of Solid State Drives as caches for
rotational hard disks. Because the high cost per GB for SSD devices this
feature may bring the best of both: fast end big yet affordable storage
capacity. Linux kernel 3.9 introduced dm-cache, kernel 3.10 introduces bcache.
== Scope ==
Proposal owners: Enable caching features in new kernels
Other developers: Support the caching features in their respective packages.
Special focus should be on making the system boot from a cached root FS.
Release engineering: All packages should operate in close harmony te make this
work. Only a rebuild of the relevant packages is required.
Policies and guidelines: No changes I think.
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
F20 Self Contained Change: FreeIPA OTP UI
by Jaroslav Reznik
= Proposed Self Contained Change: FreeIPA OTP UI =
https://fedoraproject.org/wiki/Changes/IPAv3OTPUI
Change owner(s): Nathaniel McCallum <npmccallum(a)fedoraproject.org>
FreeIPA will gain a user interface for managing users' OTP tokens.
== Detailed description ==
In Fedora 19 we introduced rudimentary support for OTP in krb5 and FreeIPA.
Building on this work, we are creating a management system so that tokens can
be managed alongside other user attributes.
== Scope ==
Proposal owners: change development
Other developers: N/A (not a System Wide Change)
Release engineering: N/A (not a System Wide Change)
Policies and guidelines: N/A (not a System Wide Change)
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
Fedora 19 for IBM System z 64bit official release
by Dan Horák
Hello everyone,
Fedora 19 GA release for the IBM System z is here. This time two weeks
later than the primary mainly because me being on vacation. It's hard
for me to take time off work when there are always some deadlines in
sight :-) And again we are closer to primary when we count the number
of available packages.
Worth noting also here is that Anaconda, the Fedora installation
program, has been extensively redesigned since Fedora 17. Documentation
is available in the Installation Guide
(http://docs.fedoraproject.org/en-US/Fedora/19/html/Installation_Guide/ch-...)
and is generally applicable to Fedora for System z.
The links to the actual release are here:
http://secondary.fedoraproject.org/pub/fedora-secondary/releases/19/Fedor...
http://secondary.fedoraproject.org/pub/fedora-secondary/releases/19/Every...
and obviously on all sites that mirror the secondary arch content and we
still have few :-)
The first directory contains the normal installation trees as well as
one DVD ISO with the complete release.
Everything as usual contains, well, everything. :)
Additional information about known issues, the current progress and
state for future release, where and how the team can be reached and just
anything else Fedora on IBM System z related can be found here:
http://fedoraproject.org/wiki/Architectures/s390x/19
For architecture specific release notes, please read it as there are
changes in the interactive installation process. It's a wiki so don't
hesitate to add your knowledge there.
More information about Fedora on IBM System z can be found at
http://fedoraproject.org/wiki/Architectures/s390x
Thanks go out to everyone involved in making this happen!
Your Fedora/s390x Maintainers
--
Dan Horák, RHCE
Senior Software Engineer, BaseOS
Red Hat Czech s.r.o., Purkyňova 99, 612 45 Brno
10 years, 11 months
rawhide report: 20130716 changes
by Fedora compose checker
Compose started at Tue Jul 16 08:15:02 UTC 2013
Broken deps for x86_64
----------------------------------------------------------
[MUMPS]
MUMPS-4.10.0-9.fc20.i686 requires libmpi_f77.so.1
MUMPS-4.10.0-9.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
MUMPS-examples-4.10.0-9.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
[aws]
aws-2.11.0-16.fc20.i686 requires libxmlada_unicode.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_schema.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_sax.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_input_sources.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_dom.so.4.3w
aws-2.11.0-16.fc20.x86_64 requires libxmlada_unicode.so.4.3w()(64bit)
aws-2.11.0-16.fc20.x86_64 requires libxmlada_schema.so.4.3w()(64bit)
aws-2.11.0-16.fc20.x86_64 requires libxmlada_sax.so.4.3w()(64bit)
aws-2.11.0-16.fc20.x86_64 requires libxmlada_input_sources.so.4.3w()(64bit)
aws-2.11.0-16.fc20.x86_64 requires libxmlada_dom.so.4.3w()(64bit)
aws-tools-2.11.0-16.fc20.x86_64 requires libxmlada_unicode.so.4.3w()(64bit)
aws-tools-2.11.0-16.fc20.x86_64 requires libxmlada_schema.so.4.3w()(64bit)
aws-tools-2.11.0-16.fc20.x86_64 requires libxmlada_sax.so.4.3w()(64bit)
aws-tools-2.11.0-16.fc20.x86_64 requires libxmlada_input_sources.so.4.3w()(64bit)
aws-tools-2.11.0-16.fc20.x86_64 requires libxmlada_dom.so.4.3w()(64bit)
[blacs]
blacs-openmpi-1.1-49.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
[cp2k]
cp2k-openmpi-2.4-3.fc20.x86_64 requires libmpi_f90.so.1()(64bit)
cp2k-openmpi-2.4-3.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-3-20.20130626gite70c293.fc20.x86_64 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.x86_64 requires tcod
[devtodo2]
devtodo2-2.1-5.20120711git8dee6.fc20.x86_64 requires libgo.so.3()(64bit)
[dragonegg]
dragonegg-3.3-1.fc20.x86_64 requires gcc = 0:4.8.1-2.fc20
[ga]
ga-openmpi-5.1.1-3.fc20.x86_64 requires libmpi_f90.so.1()(64bit)
ga-openmpi-5.1.1-3.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
[gcc-python-plugin]
gcc-python2-debug-plugin-0.12-7.fc20.x86_64 requires gcc = 0:4.8.1-2.fc20
gcc-python2-plugin-0.12-7.fc20.x86_64 requires gcc = 0:4.8.1-2.fc20
gcc-python3-debug-plugin-0.12-7.fc20.x86_64 requires gcc = 0:4.8.1-2.fc20
gcc-python3-plugin-0.12-7.fc20.x86_64 requires gcc = 0:4.8.1-2.fc20
[gdb-heap]
gdb-heap-0.5-12.fc19.x86_64 requires glibc(x86-64) = 0:2.17
[gitifyhg]
gitifyhg-0.8.2-2.fc20.noarch requires python-path
[glabels]
glabels-3.0.1-8.fc20.x86_64 requires libcamel-1.2.so.43()(64bit)
[gr-air-modes]
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.i686 requires libgruel-3.6.5.so.0.0.0
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.i686 requires libgnuradio-core-3.6.5.so.0.0.0
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.x86_64 requires libgruel-3.6.5.so.0.0.0()(64bit)
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.x86_64 requires libgnuradio-core-3.6.5.so.0.0.0()(64bit)
[gr-osmosdr]
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgruel-3.6.5.so.0.0.0
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgnuradio-fcd-3.6.5.so.0.0.0
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgnuradio-core-3.6.5.so.0.0.0
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.x86_64 requires libgruel-3.6.5.so.0.0.0()(64bit)
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.x86_64 requires libgnuradio-fcd-3.6.5.so.0.0.0()(64bit)
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.x86_64 requires libgnuradio-core-3.6.5.so.0.0.0()(64bit)
gr-osmosdr-devel-0.0.1-3.20130403gite85c68d9.fc20.i686 requires pkgconfig(gnuradio-core)
gr-osmosdr-devel-0.0.1-3.20130403gite85c68d9.fc20.x86_64 requires pkgconfig(gnuradio-core)
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
gtkd-2.0.0-29.20120815git9ae9181.fc18.x86_64 requires libphobos-ldc.so.60()(64bit)
[indi-apogee]
indi-apogee-1.0-11.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[jboss-as]
jboss-as-7.1.1-19.fc20.noarch requires cxf-common >= 0:2.6.3
[kawa]
1:kawa-1.11-5.fc19.x86_64 requires servlet25
[koji]
koji-vm-1.8.0-1.fc20.noarch requires python-virtinst
[kstars]
kstars-4.10.90-1.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[kyua-cli]
kyua-cli-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
kyua-cli-tests-0.5-3.fc19.x86_64 requires liblutok.so.0()(64bit)
[lancet]
lancet-1.0.1-6.fc19.noarch requires ant-nodeps >= 0:1.7.1
[libindi]
libindi-0.9.6-4.fc20.i686 requires libcfitsio-3.340.so.0
libindi-0.9.6-4.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[mingw-cximage]
mingw32-cximage-600-8.fc19.noarch requires mingw32(libpng15-15.dll)
mingw64-cximage-600-8.fc19.noarch requires mingw64(libpng15-15.dll)
[netcdf-fortran]
netcdf-fortran-openmpi-4.2-8.fc20.i686 requires libmpi_f90.so.1
netcdf-fortran-openmpi-4.2-8.fc20.i686 requires libmpi_f77.so.1
netcdf-fortran-openmpi-4.2-8.fc20.x86_64 requires libmpi_f90.so.1()(64bit)
netcdf-fortran-openmpi-4.2-8.fc20.x86_64 requires libmpi_f77.so.1()(64bit)
[nightview]
nightview-cli-0.3.3-9.fc20.i686 requires libcfitsio-3.340.so.0
nightview-cli-0.3.3-9.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
nightview-gui-0.3.3-9.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[nip2]
nip2-7.34.0-1.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[nodejs-express]
nodejs-express-3.3.3-1.fc20.noarch requires npm(connect) >= 0:2.8.3
nodejs-express-3.3.3-1.fc20.noarch requires npm(commander) >= 0:1.2.0
[nodejs-sha]
nodejs-sha-1.0.1-3.fc20.noarch requires npm(graceful-fs) < 0:1.3
[nodejs-tilelive-mapnik]
nodejs-tilelive-mapnik-0.5.0-1.fc20.noarch requires npm(mapnik) < 0:1.1
[openbox]
gdm-control-3.5.0-11.20121001git782b28.fc19.x86_64 requires gnome-panel
gnome-panel-control-3.5.0-11.20121001git782b28.fc19.x86_64 requires gnome-panel
[openlierox]
openlierox-0.59-0.11.beta10.fc20.x86_64 requires libgd.so.2()(64bit)
[ovirt-engine]
ovirt-engine-notification-service-3.1.0-1.fc19.noarch requires classpathx-mail
[oyranos]
oyranos-libs-0.4.0-7.fc19.i686 requires libraw.so.5
oyranos-libs-0.4.0-7.fc19.x86_64 requires libraw.so.5()(64bit)
[perl-Bio-ASN1-EntrezGene]
perl-Bio-ASN1-EntrezGene-1.091-17.fc19.noarch requires perl(Bio::Index::AbstractSeq)
[perl-Bio-SamTools]
perl-Bio-SamTools-1.35-2.fc19.x86_64 requires perl(Bio::SeqFeature::Lite)
perl-Bio-SamTools-1.35-2.fc19.x86_64 requires perl(Bio::PrimarySeq)
[perl-PDL]
perl-PDL-2.4.10-6.fc19.x86_64 requires libgd.so.2()(64bit)
[python-TraitsBackendQt]
python-TraitsBackendQt-3.5.0-5.fc19.noarch requires python-TraitsGUI
[riak]
riak-1.3.1-2.fc20.x86_64 requires erlang-eleveldb(x86-64) = 0:1.3.0
[rubygem-openshift-origin-common]
rubygem-openshift-origin-common-1.8.10-1.fc20.noarch requires rubygem(safe_yaml)
[rubygem-openshift-origin-node]
rubygem-openshift-origin-node-1.9.15-1.fc20.noarch requires rubygem(safe_yaml)
rubygem-openshift-origin-node-1.9.15-1.fc20.noarch requires openshift-origin-node-proxy
[rubygem-qpid]
rubygem-qpid-0.16.0-14.fc20.x86_64 requires libqpidmessaging.so.3()(64bit)
rubygem-qpid-0.16.0-14.fc20.x86_64 requires libqpidcommon.so.5()(64bit)
rubygem-qpid-0.16.0-14.fc20.x86_64 requires libqpidclient.so.5()(64bit)
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
[siril]
siril-0.8-14.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[skyviewer]
skyviewer-1.0.0-12.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[spacewalk-web]
spacewalk-dobby-1.9.22-2.fc19.noarch requires perl(Spacewalk::Setup)
[spring]
spring-94.1-1.fc20.x86_64 requires libassimp.so.2()(64bit)
[sumwars]
sumwars-0.5.6-12.fc20.x86_64 requires libenet-1.3.7.so()(64bit)
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
tango-2-12.20120821git7b92443.fc19.x86_64 requires libphobos-ldc.so.60()(64bit)
[templates_parser]
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_unicode.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_schema.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_sax.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_input_sources.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_dom.so.4.3w
templates_parser-11.6.0-6.fc19.x86_64 requires libxmlada_unicode.so.4.3w()(64bit)
templates_parser-11.6.0-6.fc19.x86_64 requires libxmlada_schema.so.4.3w()(64bit)
templates_parser-11.6.0-6.fc19.x86_64 requires libxmlada_sax.so.4.3w()(64bit)
templates_parser-11.6.0-6.fc19.x86_64 requires libxmlada_input_sources.so.4.3w()(64bit)
templates_parser-11.6.0-6.fc19.x86_64 requires libxmlada_dom.so.4.3w()(64bit)
templates_parser-tools-11.6.0-6.fc19.x86_64 requires libxmlada_unicode.so.4.3w()(64bit)
templates_parser-tools-11.6.0-6.fc19.x86_64 requires libxmlada_schema.so.4.3w()(64bit)
templates_parser-tools-11.6.0-6.fc19.x86_64 requires libxmlada_sax.so.4.3w()(64bit)
templates_parser-tools-11.6.0-6.fc19.x86_64 requires libxmlada_input_sources.so.4.3w()(64bit)
templates_parser-tools-11.6.0-6.fc19.x86_64 requires libxmlada_dom.so.4.3w()(64bit)
[towhee]
towhee-openmpi-7.0.4-2.fc19.1.x86_64 requires libmpi_f77.so.1()(64bit)
[ufraw]
ufraw-0.19.2-2.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
ufraw-cinepaint-0.19.2-2.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
ufraw-gimp-0.19.2-2.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[vtk]
vtk-examples-5.10.1-5.fc20.x86_64 requires vtkdata = 0:5.10.1
vtk-testing-5.10.1-5.fc20.x86_64 requires vtkdata = 0:5.10.1
[wcslib]
wcslib-utils-4.17-2.fc20.x86_64 requires libcfitsio-3.340.so.0()(64bit)
[zarafa]
libmapi-7.0.13-1.fc19.i686 requires libicalss.so.0
libmapi-7.0.13-1.fc19.i686 requires libical.so.0
libmapi-7.0.13-1.fc19.x86_64 requires libicalss.so.0()(64bit)
libmapi-7.0.13-1.fc19.x86_64 requires libical.so.0()(64bit)
php-mapi-7.0.13-1.fc19.x86_64 requires php(zend-abi) = 0:20100525-x86-64
php-mapi-7.0.13-1.fc19.x86_64 requires php(api) = 0:20100412-x86-64
zarafa-ical-7.0.13-1.fc19.x86_64 requires libicalss.so.0()(64bit)
zarafa-ical-7.0.13-1.fc19.x86_64 requires libical.so.0()(64bit)
Broken deps for i386
----------------------------------------------------------
[MUMPS]
MUMPS-4.10.0-9.fc20.i686 requires libmpi_f77.so.1
MUMPS-examples-4.10.0-9.fc20.i686 requires libmpi_f77.so.1
[aws]
aws-2.11.0-16.fc20.i686 requires libxmlada_unicode.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_schema.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_sax.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_input_sources.so.4.3w
aws-2.11.0-16.fc20.i686 requires libxmlada_dom.so.4.3w
aws-tools-2.11.0-16.fc20.i686 requires libxmlada_unicode.so.4.3w
aws-tools-2.11.0-16.fc20.i686 requires libxmlada_schema.so.4.3w
aws-tools-2.11.0-16.fc20.i686 requires libxmlada_sax.so.4.3w
aws-tools-2.11.0-16.fc20.i686 requires libxmlada_input_sources.so.4.3w
aws-tools-2.11.0-16.fc20.i686 requires libxmlada_dom.so.4.3w
[blacs]
blacs-openmpi-1.1-49.fc20.i686 requires libmpi_f77.so.1
[cp2k]
cp2k-openmpi-2.4-3.fc20.i686 requires libmpi_f90.so.1
cp2k-openmpi-2.4-3.fc20.i686 requires libmpi_f77.so.1
[derelict]
derelict-tcod-3-20.20130626gite70c293.fc20.i686 requires tcod
derelict-tcod-devel-3-20.20130626gite70c293.fc20.i686 requires tcod
[devtodo2]
devtodo2-2.1-5.20120711git8dee6.fc20.i686 requires libgo.so.3
[dragonegg]
dragonegg-3.3-1.fc20.i686 requires gcc = 0:4.8.1-2.fc20
[ga]
ga-openmpi-5.1.1-3.fc20.i686 requires libmpi_f90.so.1
ga-openmpi-5.1.1-3.fc20.i686 requires libmpi_f77.so.1
[gcc-python-plugin]
gcc-python2-debug-plugin-0.12-7.fc20.i686 requires gcc = 0:4.8.1-2.fc20
gcc-python2-plugin-0.12-7.fc20.i686 requires gcc = 0:4.8.1-2.fc20
gcc-python3-debug-plugin-0.12-7.fc20.i686 requires gcc = 0:4.8.1-2.fc20
gcc-python3-plugin-0.12-7.fc20.i686 requires gcc = 0:4.8.1-2.fc20
[gdb-heap]
gdb-heap-0.5-12.fc19.i686 requires glibc(x86-32) = 0:2.17
[gitifyhg]
gitifyhg-0.8.2-2.fc20.noarch requires python-path
[glabels]
glabels-3.0.1-8.fc20.i686 requires libcamel-1.2.so.43
[gr-air-modes]
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.i686 requires libgruel-3.6.5.so.0.0.0
gr-air-modes-0-0.13.20130409gitf25d21f5.fc20.i686 requires libgnuradio-core-3.6.5.so.0.0.0
[gr-osmosdr]
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgruel-3.6.5.so.0.0.0
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgnuradio-fcd-3.6.5.so.0.0.0
gr-osmosdr-0.0.1-3.20130403gite85c68d9.fc20.i686 requires libgnuradio-core-3.6.5.so.0.0.0
gr-osmosdr-devel-0.0.1-3.20130403gite85c68d9.fc20.i686 requires pkgconfig(gnuradio-core)
[gtkd]
gtkd-2.0.0-29.20120815git9ae9181.fc18.i686 requires libphobos-ldc.so.60
[indi-apogee]
indi-apogee-1.0-11.fc20.i686 requires libcfitsio-3.340.so.0
[jboss-as]
jboss-as-7.1.1-19.fc20.noarch requires cxf-common >= 0:2.6.3
[kawa]
1:kawa-1.11-5.fc19.i686 requires servlet25
[koji]
koji-vm-1.8.0-1.fc20.noarch requires python-virtinst
[kstars]
kstars-4.10.90-1.fc20.i686 requires libcfitsio-3.340.so.0
[kyua-cli]
kyua-cli-0.5-3.fc19.i686 requires liblutok.so.0
kyua-cli-tests-0.5-3.fc19.i686 requires liblutok.so.0
[lancet]
lancet-1.0.1-6.fc19.noarch requires ant-nodeps >= 0:1.7.1
[libindi]
libindi-0.9.6-4.fc20.i686 requires libcfitsio-3.340.so.0
[mingw-cximage]
mingw32-cximage-600-8.fc19.noarch requires mingw32(libpng15-15.dll)
mingw64-cximage-600-8.fc19.noarch requires mingw64(libpng15-15.dll)
[netcdf-fortran]
netcdf-fortran-openmpi-4.2-8.fc20.i686 requires libmpi_f90.so.1
netcdf-fortran-openmpi-4.2-8.fc20.i686 requires libmpi_f77.so.1
[nightview]
nightview-cli-0.3.3-9.fc20.i686 requires libcfitsio-3.340.so.0
nightview-gui-0.3.3-9.fc20.i686 requires libcfitsio-3.340.so.0
[nip2]
nip2-7.34.0-1.fc20.i686 requires libcfitsio-3.340.so.0
[nodejs-express]
nodejs-express-3.3.3-1.fc20.noarch requires npm(connect) >= 0:2.8.3
nodejs-express-3.3.3-1.fc20.noarch requires npm(commander) >= 0:1.2.0
[nodejs-sha]
nodejs-sha-1.0.1-3.fc20.noarch requires npm(graceful-fs) < 0:1.3
[nodejs-tilelive-mapnik]
nodejs-tilelive-mapnik-0.5.0-1.fc20.noarch requires npm(mapnik) < 0:1.1
[openbox]
gdm-control-3.5.0-11.20121001git782b28.fc19.i686 requires gnome-panel
gnome-panel-control-3.5.0-11.20121001git782b28.fc19.i686 requires gnome-panel
[openlierox]
openlierox-0.59-0.11.beta10.fc20.i686 requires libgd.so.2
[ovirt-engine]
ovirt-engine-notification-service-3.1.0-1.fc19.noarch requires classpathx-mail
[oyranos]
oyranos-libs-0.4.0-7.fc19.i686 requires libraw.so.5
[perl-Bio-ASN1-EntrezGene]
perl-Bio-ASN1-EntrezGene-1.091-17.fc19.noarch requires perl(Bio::Index::AbstractSeq)
[perl-Bio-SamTools]
perl-Bio-SamTools-1.35-2.fc19.i686 requires perl(Bio::SeqFeature::Lite)
perl-Bio-SamTools-1.35-2.fc19.i686 requires perl(Bio::PrimarySeq)
[perl-PDL]
perl-PDL-2.4.10-6.fc19.i686 requires libgd.so.2
[python-TraitsBackendQt]
python-TraitsBackendQt-3.5.0-5.fc19.noarch requires python-TraitsGUI
[riak]
riak-1.3.1-2.fc20.i686 requires erlang-eleveldb(x86-32) = 0:1.3.0
[rubygem-openshift-origin-common]
rubygem-openshift-origin-common-1.8.10-1.fc20.noarch requires rubygem(safe_yaml)
[rubygem-openshift-origin-node]
rubygem-openshift-origin-node-1.9.15-1.fc20.noarch requires rubygem(safe_yaml)
rubygem-openshift-origin-node-1.9.15-1.fc20.noarch requires openshift-origin-node-proxy
[rubygem-qpid]
rubygem-qpid-0.16.0-14.fc20.i686 requires libqpidmessaging.so.3
rubygem-qpid-0.16.0-14.fc20.i686 requires libqpidcommon.so.5
rubygem-qpid-0.16.0-14.fc20.i686 requires libqpidclient.so.5
[scala]
scala-2.9.2-2.fc19.noarch requires osgi(org.scala-ide.scala.library)
[siril]
siril-0.8-14.fc20.i686 requires libcfitsio-3.340.so.0
[skyviewer]
skyviewer-1.0.0-12.fc20.i686 requires libcfitsio-3.340.so.0
[spacewalk-web]
spacewalk-dobby-1.9.22-2.fc19.noarch requires perl(Spacewalk::Setup)
[spring]
spring-94.1-1.fc20.i686 requires libassimp.so.2
[sumwars]
sumwars-0.5.6-12.fc20.i686 requires libenet-1.3.7.so
[tango]
tango-2-12.20120821git7b92443.fc19.i686 requires libphobos-ldc.so.60
[templates_parser]
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_unicode.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_schema.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_sax.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_input_sources.so.4.3w
templates_parser-11.6.0-6.fc19.i686 requires libxmlada_dom.so.4.3w
templates_parser-tools-11.6.0-6.fc19.i686 requires libxmlada_unicode.so.4.3w
templates_parser-tools-11.6.0-6.fc19.i686 requires libxmlada_schema.so.4.3w
templates_parser-tools-11.6.0-6.fc19.i686 requires libxmlada_sax.so.4.3w
templates_parser-tools-11.6.0-6.fc19.i686 requires libxmlada_input_sources.so.4.3w
templates_parser-tools-11.6.0-6.fc19.i686 requires libxmlada_dom.so.4.3w
[towhee]
towhee-openmpi-7.0.4-2.fc19.1.i686 requires libmpi_f77.so.1
[ufraw]
ufraw-0.19.2-2.fc20.i686 requires libcfitsio-3.340.so.0
ufraw-cinepaint-0.19.2-2.fc20.i686 requires libcfitsio-3.340.so.0
ufraw-gimp-0.19.2-2.fc20.i686 requires libcfitsio-3.340.so.0
[vtk]
vtk-examples-5.10.1-5.fc20.i686 requires vtkdata = 0:5.10.1
vtk-testing-5.10.1-5.fc20.i686 requires vtkdata = 0:5.10.1
[wcslib]
wcslib-utils-4.17-2.fc20.i686 requires libcfitsio-3.340.so.0
[zarafa]
libmapi-7.0.13-1.fc19.i686 requires libicalss.so.0
libmapi-7.0.13-1.fc19.i686 requires libical.so.0
php-mapi-7.0.13-1.fc19.i686 requires php(zend-abi) = 0:20100525-x86-32
php-mapi-7.0.13-1.fc19.i686 requires php(api) = 0:20100412-x86-32
zarafa-ical-7.0.13-1.fc19.i686 requires libicalss.so.0
zarafa-ical-7.0.13-1.fc19.i686 requires libical.so.0
New package: gitifyhg-0.8.2-2.fc20
Use git as a client for Mercurial repos
New package: jboss-integration-6.0.0-0.1.CR1.fc20
JBoss Integration
New package: jboss-jsf-2.2-api-2.2.0-1.fc20
JavaServer Faces 2.2 API
New package: mingw-postgresql-9.2.4-1.fc20
MinGW Windows PostgreSQL library
New package: python-umemcache-1.6.3-2.fc20
Memcache client written in highly optimized C++ with Python
Updated Packages:
CCfits-2.4-9.fc20
-----------------
* Mon Jul 15 2013 Sergio Pascual <sergiopr(a)fedoraproject.org> 2.4-9
- Using new cfitsio 3.350
Size change: 91 bytes
adcli-0.7.1-4.fc20
------------------
* Mon Jul 15 2013 Stef Walter <stefw(a)redhat.com> - 0.7.1-4
- Build with verbose output logging
Size change: 128 bytes
anaconda-20.2-1.fc20
--------------------
* Mon Jul 15 2013 Brian C. Lane <bcl(a)redhat.com> - 20.2-1
- Use the new wait for connectivity function (mkolman)
- Improve waiting for network connectivity (mkolman)
- Use langtable to get default layout instead of our magic (#485137) (vpodzime)
- Adapt to the new localization module (vpodzime)
- Rewrite the localization module (vpodzime)
- Make the Welcome spoke wait for Geolocation lookup to finish (#975193)
(mkolman)
Size change: 9820 bytes
apache-commons-exec-1.1-10.fc20
-------------------------------
* Mon Jul 15 2013 Mat Booth <fedora(a)matbooth.co.uk> - 1.1-10
- Add missing BRs
* Mon Jul 15 2013 Mikolaj Izdebski <mizdebsk(a)redhat.com> - 1.1-9
- Install NOTICE file with javadoc package
- Resolves: rhbz#984417
Size change: -746 bytes
bacula-5.2.13-13.fc20
---------------------
* Mon Jul 15 2013 Petr Hracek <phracek(a)redhat.com> - 5.2.13-13
- make dependency of bacula packages on bacula-libs RHEL-7 rpmdiff (#881146)
Size change: 179 bytes
bind-9.9.4-0.1.b1.fc20
----------------------
* Mon Jul 15 2013 Tomas Hozza <thozza(a)redhat.com> 32:9.9.4-0.1.b1
- update to bind-9.9.4b1
- drop merged RRL patch
- drop merged stat.h patch
Size change: 21981 bytes
bind-dyndb-ldap-3.4-2.fc20
--------------------------
* Mon Jul 15 2013 Tomas Hozza <thozza(a)redhat.com> 3.4-2
- rebuild against new bind
Size change: 98 bytes
brltty-4.5-6.fc20
-----------------
* Mon Jul 15 2013 Jaroslav Škarvada <jskarvad(a)redhat.com> - 4.5-6
- Updated man page
Size change: 4683 bytes
cifs-utils-6.1-3.fc20
---------------------
* Mon Jul 15 2013 Jeff Layton <jlayton(a)redhat.com> 6.1-3
- allow setcifsacl to work if plugin can't be loaded (bz#984087)
* Mon Jul 15 2013 Jeff Layton <jlayton(a)redhat.com> 6.1-2
- Convert idmapping plugin symlink to use alternatives system (bz#984088)
Size change: 2753 bytes
community-mysql-5.5.32-8.fc20
-----------------------------
* Mon Jul 15 2013 Honza Horak <hhorak(a)redhat.com> 5.5.32-8
- Revert path change to ldconfig, UsrMove is not complete yet
* Wed Jul 10 2013 Honza Horak <hhorak(a)redhat.com> 5.5.32-7
- Arm support for multilib hacks
Size change: 277 bytes
cpl-6.3.1-1.fc20
----------------
* Tue Jul 16 2013 Sergio Pascual <sergiopr(a)fedoraproject.org> - 6.3.1-1
- New upstream source 6.3.1
- EVR bump to rebuild with new cfitsio 3.350
Size change: 71455 bytes
cptutils-1.47-1.fc20
--------------------
* Mon Jul 15 2013 Volker Fröhlich <volker27(a)gmx.at> 1.47-1
- New upstream release
Size change: 3550 bytes
dhcp-4.2.5-16.fc20
------------------
* Mon Jul 15 2013 Tomas Hozza <thozza(a)redhat.com> - 12:4.2.5-16
- rebuild against new bind
Size change: 89 bytes
dmapd-0.0.55-2.fc20
-------------------
* Fri Jul 05 2013 W. Michael Petullo <mike[(a)]flyn.org> 0.0.55-2
- Remove dmapd-vips-7.32.patch
* Fri Jul 05 2013 W. Michael Petullo <mike[(a)]flyn.org> 0.0.55-1
- New upstream version
Size change: 3922 bytes
dnsperf-2.0.0.0-7.fc20
----------------------
* Mon Jul 15 2013 Tomas Hozza <thozza(a)redhat.com> - 2.0.0.0-7
- Rebuild against bind 9.9.4b1
Size change: 132 bytes
elixir-0.10.0-1.fc20
--------------------
* Tue Jul 16 2013 Ricky Elrod <codeblock(a)fedoraproject.org> - 0.10.0-1
- Update to upstream 0.10.0.
Size change: 66345 bytes
espeak-1.47.11-2.fc20
---------------------
* Mon Jul 15 2013 Jaroslav Škarvada <jskarvad(a)redhat.com> - 1.47.11-2
- Fixed manual page and built-in help to be up-to-date
Size change: 809 bytes
fcitx-sunpinyin-0.4.1-1.fc20
----------------------------
* Sun Jul 14 2013 Liang Suilong <liangsuilong(a)gmail.com> - 0.4.1-1
- Upstream to fcitx-sunpinyin-0.4.1
Size change: -197 bytes
fedora-upgrade-19.3-1.fc20
--------------------------
* Mon Jul 15 2013 Miroslav Suchý <msuchy(a)redhat.com> 19.3-1
- 983082 - clarify that fedora-upgrade is not an official upgrade tool
- set up differ for rpmconf
- warn about loosing session (bug 962983)
- update README
Size change: 870 bytes
gcc-4.8.1-4.fc20
----------------
* Mon Jul 15 2013 Jakub Jelinek <jakub(a)redhat.com> 4.8.1-4
- update from the 4.8 branch
- PRs c++/57437, c++/57526, c++/57532, c++/57545, c++/57550, c++/57551,
c++/57645, c++/57771, c++/57831, fortran/57785,
rtl-optimization/57829, target/56102, target/56892, target/56987,
target/57506, target/57631, target/57736, target/57744,
target/57777, target/57792, target/57844
- backport some raw-string literal handling fixes (#981029,
PRs preprocessor/57757, preprocessor/57824)
- improve convert_to_* (PR c++/56493)
- tune for power7 on RHEL7
* Fri Jun 28 2013 Jakub Jelinek <jakub(a)redhat.com> 4.8.1-3
- update from the 4.8 branch
- PRs c++/53211, c++/56544, driver/57652, libstdc++/57619, libstdc++/57666,
libstdc++/57674, rtl-optimization/57518, target/57623, target/57655,
tree-optimization/57358, tree-optimization/57537
- fix up gcc-{ar,nm,ranlib} (#974853, PR driver/57651)
- fix two libitm HTM handling bugs (PR libitm/57643)
- speed up __popcount[sdt]i2 library function (PR middle-end/36041)
- backport power8 support from trunk (#731884, PR target/57615)
- for Fedora 20+ test -fstack-protector-strong during %check instead
of -fstack-protector
Size change: -58080 bytes
gcin-2.8.1-1.fc20
-----------------
* Tue Jul 16 2013 Christopher Meng <rpm(a)cicku.me> - 2.8.1-1
- Update to new version.
Size change: 159029 bytes
gdcm-2.2.4-2.fc20
-----------------
* Tue Jul 16 2013 Mario Ceresa <mrceresa(a)fedoraproject.org> - 2.2.4-2
- Add support for vtk 6.0.0
* Fri Jul 12 2013 Orion Poplawski <orion(a)cora.nwra.com> - 2.2.4-1
- Update to 2.2.4
- Rebuild for vtk 6.0.0
Size change: 27325 bytes
gnome-user-share-3.8.3-1.fc20
-----------------------------
* Mon Jul 15 2013 Bastien Nocera <bnocera(a)redhat.com> 3.8.3-1
- Update to 3.8.3
Size change: 3584 bytes
gnutls-3.1.13-1.fc20
--------------------
* Mon Jul 15 2013 Tomáš Mráz <tmraz(a)redhat.com> 3.1.13-1
- new upstream release
Size change: 95560 bytes
google-noto-fonts-20130624-1.fc20
---------------------------------
* Tue Jul 16 2013 Pravin Satpute <psatpute(a)redhat.com> - 20130624-1
- Resolved #984459 :- Upstream new release.
- Added new package google-noto-serif-khmer-fonts
Size change: 104056 bytes
gprbuild-2013-2.fc20
--------------------
* Tue Jul 16 2013 Pavel Zhukov <landgraf(a)fedoraproject.org> - 2013-2
- rebuild with Fedora optflags (#984721)
Size change: -71 bytes
healpix-2.13a-11.fc20
---------------------
* Mon Jul 15 2013 Jon Ciesla <limburgher(a)gmail.com> - 2.13a-11
- cfitsio reabuild.
Size change: 74 bytes
iaxclient-2.1-0.13.beta3.fc20
-----------------------------
* Mon Jul 15 2013 Tom Callaway <spot(a)fedoraproject.org> - 2.1-0.13.beta3
- add memory barriers for arm (bz 927443)
Size change: -490 bytes
ibus-typing-booster-1.2.2-1.fc20
--------------------------------
* Mon Jul 15 2013 Mike FABIAN <mfabian(a)redhat.com> - 1.2.2-1
- Update to 1.2.2 upstream version
- Commit immediately when certain punctuation characters are typed and transliteration is not used (Resolves: rhbz#981179)
- Add an option to try completion only when a minimum number of characters has been typed
Size change: -531 bytes
iputils-20121221-3.fc20
-----------------------
* Mon Jul 15 2013 Jan Synáček <jsynacek(a)redhat.com> - 20121221-3
- Harden the package
Size change: -1004 bytes
java-1.8.0-openjdk-1.8.0.0-0.9.b89.fc20
---------------------------------------
* Mon Jul 15 2013 Omair Majid <omajid(a)redhat.com> - 1:1.8.0.0-0.9.b89
- Switch to xz for compression
- Fixes RHBZ#979823
* Mon Jul 15 2013 Omair Majid <omajid(a)redhat.com> - 1:1.8.0.0-0.9.b89
- Priority should be 0 until openjdk8 is released by upstream
- Fixes RHBZ#964409
Size change: -25673275 bytes
jboss-web-8.0.0-0.1.Alpha1.fc20
-------------------------------
* Mon Jul 15 2013 Marek Goldmann <mgoldman(a)redhat.com> - 8.0.0-0.1.Alpha1
- Upstream release 8.0.0.Alpha1
- New guidelines
- Using Maven
* Thu Feb 14 2013 Fedora Release Engineering <rel-eng(a)lists.fedoraproject.org> - 7.0.13-6
- Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
Size change: -79581 bytes
jpanoramamaker-5.5-0.fc20
-------------------------
* Mon Jul 15 2013 Jiri Vanek <jvanek(a)redhat.com> - 5.5-0
- folowing changes in jutils, version for classpath setup fixed
- unlimited number of arguments now supported
- removed ant-nodeps
Size change: -874 bytes
kexec-tools-2.0.4-6.fc20
------------------------
* Fri Jul 12 2013 Baoquan He <bhe(a)redhat.com> - 2.0.4-6
- add snappy build
- add lzo build
- pull makedumpfile-1.5.4
- mkdumprd: check return value of subshell
- mkdumprd: get_persistent_dev() return original dev if no persistent dev exists.
- dracut-kdump.sh: Merge dump_to_rootfs() to dump_fs()
- dracut-kdump.sh: explicitly sync after each dump
- Correct wrong weekday of changelog
- kexec-tools.spec: Remove incorrect description in changelog
Size change: 3404 bytes
knot-1.3.0-0.3.rc4.fc20
-----------------------
* Mon Jul 15 2013 Paul Wouters <pwouters(a)redhat.com> - 1.3.0-0.3.rc4
- Added Alias=knotd.service alias to service file
- Added ExecStartPre=/usr/sbin/knotc checkconf to service file
* Mon Jul 15 2013 Jan Vcelak <jvcelak(a)fedoraproject.org> 1.3.0-0.2.rc4
- update to 1.3.0-rc4
* Wed Jul 03 2013 Jan Vcelak <jvcelak(a)fedoraproject.org> 1.3.0-0.1.rc3
- update to 1.3.0-rc3
- update configuration
- disable assertions in the code (define NDEBUG)
- enable unit tests as a part of RPM build process
- enable fast zone parser
- fix wrong dates in changelog
Size change: -84311 bytes
libssh-0.5.4-4.fc20
-------------------
* Tue Jul 16 2013 Simone Caronni <negativo17(a)gmail.com> - 0.5.4-4
- Add patch for #982685.
Size change: 799 bytes
libvisio-0.0.30-1.fc20
----------------------
* Mon Jul 15 2013 David Tardon <dtardon(a)redhat.com> - 0.0.30-1
- new release
Size change: 1670 bytes
livecd-tools-19.6-1.fc20
------------------------
* Mon Jul 15 2013 Brian C. Lane <bcl(a)redhat.com> 19.6-1
- Version 19.6 (bcl)
- litd: Add kickstart option (bcl)
- ts.check output is a list of tuples (#979759) (bcl)
- Add repo --noverifyssl support (#907707) (bcl)
Size change: 312 bytes
mate-terminal-1.6.1-9.fc20
--------------------------
* Mon Jul 15 2013 Wolfgang Ulbrich <chat-to-me(a)raveit.de> - 1.6.1.9
- another fix for better default patch
Size change: 370 bytes
maven-help-plugin-2.2-1.fc20
----------------------------
* Mon Jul 15 2013 Mat Booth <fedora(a)matbooth.co.uk> - 2.2-1
- Update to latest upstream, fixes rhbz #915220
- Drop upstreamed plexus-containers-component-metadata patch
- No longer need missing package declaration workaround for HelpMojo.java
Size change: 7495 bytes
midori-0.5.4-1.fc20
-------------------
* Mon Jul 15 2013 Kevin Fenzi <kevin(a)scrye.com> 0.5.4-1
- Update to 0.5.4
Size change: 109578 bytes
mongodb-2.4.5-4.fc20
--------------------
* Fri Jul 12 2013 Troy Dawson <tdawson(a)redhat.com> - 2.4.5-4
- Added Provides: mongodb-devel to libmongodb-devel
Size change: 133 bytes
nodejs-fstream-0.1.23-1.fc20
----------------------------
* Fri Jul 12 2013 T.C. Hollingsworth <tchollingsworth(a)gmail.com> - 0.1.23-1
- new upstream release 0.1.23
Size change: 120 bytes
nodejs-mapnik-1.1.0-1.fc20
--------------------------
* Mon Jul 15 2013 Tom Hughes <tom(a)compton.nu> - 1.1.0-1
- Update to 1.1.0 upstream release
- Remove mapnik-vector-tile from run time dependencies
Size change: 2581 bytes
nodejs-mapnik-vector-tile-0.1.0-1.fc20
--------------------------------------
* Mon Jul 15 2013 Tom Hughes <tom(a)compton.nu> - 0.1.0-1
- Updated to 0.1.0 upstream release
Size change: -348 bytes
nodejs-mbtiles-0.3.1-1.fc20
---------------------------
* Mon Jul 15 2013 Tom Hughes <tom(a)compton.nu> - 0.3.1-1
- Update to 0.3.1 upstream release
- Update to latest nodejs packaging standards
- Switch to running tests using mocha
Size change: -8494 bytes
nodejs-sqlite3-2.1.12-1.fc20
----------------------------
* Mon Jul 15 2013 Tom Hughes <tom(a)compton.nu> - 2.1.12-1
- Update 2.1.12 upstream release
- Increase test timeout for ARM builds
Size change: 714 bytes
nodejs-tilelive-4.5.0-1.fc20
----------------------------
* Mon Jul 15 2013 Tom Hughes <tom(a)compton.nu> - 4.5.0-1
- Update to 4.5.0 upstream release
- Update to latest nodejs packaging standards
Size change: 77 bytes
nomacs-1.4.0-1.fc20
-------------------
* Mon Jul 15 2013 TI_Eugene <ti.eugene(a)gmail.com> 1.4.0-1
- Version bump.
- BR libtiff-devel added
* Sat Jun 15 2013 TI_Eugene <ti.eugene(a)gmail.com> 1.2.0-1
- Version bump.
- %find_lang macro added
- _als translation removed
Size change: 27204 bytes
ntp-4.2.6p5-13.fc20
-------------------
* Mon Jul 15 2013 Miroslav Lichvar <mlichvar(a)redhat.com> 4.2.6p5-13
- ignore duplicate servers from dhclient
- don't use -Wstrict-overflow with -fno-strict-overflow
- buildrequire systemd-units
- remove pie test
Size change: 294 bytes
octave-control-2.4.3-1.fc20
---------------------------
* Mon Jul 15 2013 Thomas Sailer <t.sailer(a)alumni.ethz.ch> - 2.4.3-1
- update to 2.4.3
Size change: 7528 bytes
openlmi-networking-0.0.9-3.fc20
-------------------------------
* Mon Jul 15 2013 Jan Synáček <jsynacek(a)redhat.com> - 0.0.10
- Fix compilation against konkretcmpi-0.9.1
Size change: 836 bytes
openlmi-providers-0.0.25-3.fc20
-------------------------------
* Mon Jul 15 2013 Jan Synáček <jsynacek(a)redhat.com> - 0.0.25-3
- Rebuild against new konkretcmpi
- Really fix the compilation against new konkretcmpi
* Fri Jun 28 2013 Roman Rakus <rrakus(a)redhat.com> - 0.0.25-2
- Againg add registration of 05_LMI_Qualifiers.mof
Size change: 1164 bytes
openscap-0.9.10-1.fc20
----------------------
* Mon Jul 15 2013 Petr Lautrbach <plautrba(a)redhat.com> 0.9.10-1
- upgrade
Size change: -144214 bytes
oprofile-0.9.8-10.fc20
----------------------
* Mon Jul 15 2013 Will Cohen <wcohen(a)redhat.com> - 0.9.8-10
- rhbz949028: Man page scan results for oprofile
Size change: 3055 bytes
pdfbox-1.8.2-1.fc20
-------------------
* Sun Jul 14 2013 Orion Poplawski <orion(a)cora.nwra.com> - 1.8.2-1
- Update to 1.8.2
- Drop unneeded maven BRs
Size change: 6762 bytes
perl-BSD-Resource-1.29.07-1.fc20
--------------------------------
* Mon Jul 15 2013 Petr Šabata <contyk(a)redhat.com> - 1.29.07-1
- 1.2907 bump, tests and pod enhancements
- Fix a bogus date in changelog
Size change: 1080 bytes
perl-Module-Implementation-0.07-1.fc20
--------------------------------------
* Mon Jul 15 2013 Paul Howarth <paul(a)city-fan.org> - 0.07-1
- Update to 0.07
- Require Test::Fatal ≥ 0.006 to avoid test failures (CPAN RT#76809)
- Explicitly run author tests, except for EL builds
- Add buildreqs for new tests
- Apply old Test::More patch if we have Test::More < 0.96
Size change: 470 bytes
perl-Ouch-0.0403-1.fc20
-----------------------
* Mon Jul 15 2013 Petr Šabata <contyk(a)redhat.com> - 0.0403-1
- 0.0403, documentation typo fixes
Size change: 143 bytes
perl-Test-Warnings-0.008-1.fc20
-------------------------------
* Mon Jul 15 2013 Paul Howarth <paul(a)city-fan.org> - 0.008-1
- Update to 0.008
- Compile test updated, to hopefully fix mswin32 parsing issues
Size change: 314 bytes
perl-qpid-0.22-3.fc20
---------------------
* Mon Jul 15 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.22-3
- Updated build to fix dependency issues on qpid-cpp.
* Tue Jun 25 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.22-2
- Perl Makefile.PL now generates the Swig bindings source.
- Resolves: QPID-4939
Size change: 148 bytes
php-pecl-apcu-4.0.1-2.fc20
--------------------------
* Mon Jul 15 2013 Remi Collet <rcollet(a)redhat.com> - 4.0.1-2
- adapt for SCL
Size change: 249 bytes
php-phpunit-PHP-Invoker-1.1.3-1.fc20
------------------------------------
* Tue Jul 16 2013 Remi Collet <remi(a)fedoraproject.org> - 1.1.3-1
- Update to 1.1.3 (stable) - API 1.1.0
Size change: -990 bytes
powwow-1.2.17-1.fc20
--------------------
* Mon Jul 15 2013 Kalev Lember <kalevlember(a)gmail.com> - 1.2.17-1
- Update to 1.2.17
Size change: 12640 bytes
pykickstart-1.99.34-1.fc20
--------------------------
* Mon Jul 15 2013 Chris Lumens <clumens(a)redhat.com> - 1.99.34-1
- Always create self.handler on-demand in the test cases. (clumens)
- Also set the seen attribute when __call__ is used. (clumens)
- Mark the upgrade command as deprecated. (clumens)
- Add the method test case back in. (clumens)
- Set the seen attribute when parsing in test cases, too. (clumens)
- Add a proxy method command object. (clumens)
- Add an interactive kickstart shell command, ksshell. (clumens)
- Fix string substitution errors in translatable text. (clumens)
- Break the method command out into individual commands. (clumens)
Size change: 6606 bytes
python-eyed3-0.7.3-1.fc20
-------------------------
* Fri Jul 12 2013 Christopher Meng <rpm(a)cicku.me> - 0.7.3-1
- New version.
- Remove paver BR.
Size change: 67115 bytes
python-polib-1.0.3-1.fc20
-------------------------
* Tue Jul 16 2013 Ding-Yi Chen <dchen(a)redhat.com> - 1.0.3-1
- python3 binding is available (python3-polib)
- Fixed Bug 978672 - This package should be updated.
- Upstream update to 1.0.3
- Version 1.0.3 (2013/02/09)
Fixed issue #38: POFile.append() raised a duplicate exception when you tried to add a new entry with the same msgid and a different msgctxt (only when check_for_duplicates option is set to True)
Fixed issue #39: Added __init__.py file for convenience
Fixed issue #41: UnicodeDecodeError when running setup.py build on python3 with C locale
polib is now fully PEP8 compliant
Small improvements: remove unused "typ" var (thanks Rodrigo Silva), mproved Makefile, Make sure _BaseFile.__contains__ returns a boolean value
- Version 1.0.2 (2012/10/23)
allow empty comments, flags or occurences lines
- Version 1.0.1 (2012/09/11)
speed up POFile.merge method (thanks @encukou)
allow comments starting with two '#' characters (thanks @goibhniu)
Size change: 752 bytes
root-5.34.09-2.fc20
-------------------
* Tue Jul 16 2013 Mattias Ellert <mattias.ellert(a)fysast.uu.se> - 5.34.09-2
- Rebuild for cfitsio 3.350
Size change: 99 bytes
rpmconf-0.3.4-1.fc20
--------------------
* Mon Jul 15 2013 Miroslav Suchý <miroslav(a)suchy.cz>
- When overwriting the current file with an .rpmnew/.rpmsave file, check that
the copy worked before removing the source file.
- Skip deleting files if user input could not be read.
- fix few spelling typos
Size change: -1117 bytes
rsh-0.17-73.fc20
----------------
* Mon Jul 15 2013 Michal Sekletar <msekleta(a)redhat.com> - 0.17-73
- add IPv6 support to rexec and rexecd
- enable hardened build
- fix dates in changelog
Size change: 1279 bytes
ruby-2.0.0.247-14.fc20
----------------------
* Mon Jul 15 2013 Vít Ondruch <vondruch(a)redhat.com> - 2.0.0.247-14
- Add forgotten psych.rb link into rubygem-psych to fix "private method `load'
called for Psych:Moduler" error (rhbz#979133).
Size change: 246 bytes
rubygem-qpid_messaging-0.22.0-2.fc20
------------------------------------
* Mon Jul 15 2013 Darryl L. Pierce <dpierce(a)redhat.com> - 0.22-2
- Updated build to fix dependency issues on qpid-cpp.
Size change: 142 bytes
rubygem-rack-protection-1.5.0-1.fc20
------------------------------------
* Mon Jul 15 2013 Michal Fojtik <mfojtik(a)redhat.com> - 1.5.0-1
- Release 1.5.0
Size change: -702 bytes
rubygem-sinatra-1.4.3-1.fc20
----------------------------
* Mon Jul 15 2013 Michal Fojtik <mfojtik(a)redhat.com> - 1:1.4.3-1
- Update to 1.4.3
Size change: 23644 bytes
rubygems-2.0.5-100.fc20
-----------------------
* Mon Jul 15 2013 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 2.0.5-100
- Update to 2.0.5
- Show backtrace when %gem_install fails
* Thu Jul 04 2013 Vít Ondruch <vondruch(a)redhat.com> - 2.0.3-2
- Fix RubyGems search paths when building gems with native extension
(rhbz#979133).
Size change: 1158 bytes
strongswan-5.0.4-4.fc20
-----------------------
* Mon Jul 15 2013 Jamie Nguyen <jamielinux(a)fedoraproject.org> - 5.0.4-4
- %files tries to package some of the shared objects as directories (#984437)
- fix broken systemd unit file (#984300)
- fix rpmlint error: description-line-too-long
- fix rpmlint error: macro-in-comment
- fix rpmlint error: spelling-error Summary(en_US) fuctionality
- depend on 'systemd' instead of 'systemd-units'
- use new systemd scriptlet macros
- NetworkManager subpackage should have a copy of the license (#984490)
- enable hardened_build as this package meets the PIE criteria (#984429)
- invocation of "ipsec _updown iptables" is broken as ipsec is renamed
to strongswan in this package (#948306)
- invocation of "ipsec scepclient" is broken as ipsec is renamed
to strongswan in this package
- add /etc/strongswan/ipsec.d and missing subdirectories
- conditionalize building of strongswan-NetworkManager subpackage as the
version of NetworkManager in EL6 is too old (#984497)
* Fri Jun 28 2013 Avesh Agarwal <avagarwa(a)redhat.com> - 5.0.4-3
- Patch to fix a major crash issue when Freeradius loads
attestatiom-imv and does not initialize libstrongswan which
causes crash due to calls to PTS algorithms probing APIs.
So this patch fixes the order of initialization. This issues
does not occur with charon because libstrongswan gets
initialized earlier.
- Patch that allows to outputs errors when there are permission
issues when accessing strongswan.conf.
- Patch to make loading of modules configurable when libimcv
is used in stand alone mode without charon with freeradius
and wpa_supplicant.
* Tue Jun 11 2013 Avesh Agarwal <avagarwa(a)redhat.com> - 5.0.4-2
- Enabled TNCCS 1.1 protocol
- Fixed libxm2-devel build dependency
- Patch to fix the issue with loading of plugins
* Wed May 01 2013 Avesh Agarwal <avagarwa(a)redhat.com> - 5.0.4-1
- New upstream release
- Fixes for CVE-2013-2944
- Enabled support for OS IMV/IMC
- Created and applied a patch to disable ECP in fedora, because
Openssl in Fedora does not allow ECP_256 and ECP_384. It makes
it non-compliant to TCG's PTS standard, but there is no choice
right now. see redhat bz # 319901.
- Enabled Trousers support for TPM based operations.
Size change: 6283 bytes
systemtap-2.3-0.234.g54cbada.fc20
---------------------------------
* Mon Jul 15 2013 Lukas Berk <lberk(a)redhat.com> - 2.3-0.234.g54cbada
- Automated weekly rawhide release
- Applied spec changes from upstream git
Size change: 2626 bytes
units-2.02-1.fc20
-----------------
* Mon Jul 15 2013 Kamil Dudka <kdudka(a)redhat.com> - 2.02-1
- new upstream release
Size change: 58205 bytes
wayland-1.2.0-1.fc20
--------------------
* Mon Jul 15 2013 Richard Hughes <rhughes(a)redhat.com> - 1.2.0-1
- wayland 1.2.0
Size change: 201105 bytes
weston-1.2.0-1.fc20
-------------------
Size change: 249358 bytes
xvkbd-3.5-1.fc20
----------------
* Mon Jul 15 2013 Christopher Meng <rpm(a)cicku.me> - 3.5-1
- Update to 3.5.
Size change: 24900 bytes
youtube-dl-2013.07.12-1.fc20
----------------------------
* Tue Jul 16 2013 Christopher Meng <rpm(a)cicku.me> - 2013.07.12-1
- Update to new release.
Size change: 5353 bytes
Summary:
Added Packages: 5
Removed Packages: 0
Modified Packages: 82
Size of added packages: 16970693 (16 M)
Size change of modified packages: -24640204 (-23 M)
Size of removed packages: 0 (0 )
Size change: -7669511 (-7.3 M)
Compose finisheded at Tue Jul 16 12:32:19 UTC 2013
10 years, 11 months
F20 Self Contained Change: Developer Assistant GUI
by Jaroslav Reznik
= Proposed Self Contained Change: Developer Assistant GUI =
https://fedoraproject.org/wiki/Changes/DeveloperAssistantGUI
Change owner(s): Petr Hracek <phracek(a)redhat.com>, Bohuslav Kabrda
<bkabrda(a)redhat.com>
The feature aims to provide GUI for devassistant package.
== Detailed description ==
This feature aims to provide GUI frontend for devassistant package which
currently only works on commandline.
== Scope ==
Proposal owners:
* creating wizard for each specific part for devassistant backend
* all information will be taken from devassistant engine
Other developers: N/A (not a System Wide Change)
Release engineering: N/A (not a System Wide Change)
Policies and guidelines: N/A (not a System Wide Change)
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
F20 System Wide Change: Unversioned Docdirs
by Jaroslav Reznik
= Proposed System Wide Change: Unversioned Docdirs =
https://fedoraproject.org/wiki/Changes/UnversionedDocdirs
Change owner(s): Ville Skyttä <ville.skytta(a)iki.fi>
Install package specific documentation to an unversioned subdir in
/usr/share/doc.
== Detailed description ==
Change the per package documentation directory in /usr/share/doc to
unversioned, just containing the package's name (previously it contained both
the package's name and its version). rpmbuild already has support for this, by
setting the %_docdir_fmt macro to %{name} we cover most of the cases. Other
cases can be grepped through from package specfiles/patches -- grepping for
_docdir, _defaultdocdir, usr/share/doc and _datadir.*doc should catch almost
everything. Packages for which multiple versions are intended to be installed
need to be changed to install their docs into appropriately versioned subdirs,
for example explicitly using the previous NAME-VERSION scheme. Some of these
cases, if unaddressed, will also manifest themselves as build failures due to
files not found at expected locations.
== Scope ==
Proposal owners: take care of having the %_docdir_fmt macro set to %{name} in
rpm or redhat-rpm-config, grep through package specfiles and patches identifying
cases needing special attention.
Other developers: see if their package explicitly refers to a NAME-VERSION
subdir in /usr/share/doc, and change those to NAME.
Release engineering: mass rebuild is required after the %_docdir_fmt macro
change.
Policies and guidelines: all documentation referring to NAME-VERSION subdirs
in /usr/share/doc needs to be changed to NAME instead.
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
F20 Self Contained Change: Transitive Trusts with Active Directory support for FreeIPA
by Jaroslav Reznik
= Proposed Self Contained Change: Transitive Trusts with Active Directory
support for FreeIPA =
https://fedoraproject.org/wiki/Changes/IPAv3TransitiveTrusts
Change owner(s): Matthias Clasen <mclasen(a)redhat.com> and the desktop SIG
FreeIPA will support transitive trusts with Active Directory
== Detailed description ==
FreeIPA in Fedora 19 already supports cross-realm trusts with Active
Directory. New version of FreeIPA will make possible to use FreeIPA identities
to access resources in Active Directory, for example, to log-on into Windows
workstations.
== Scope ==
This change requires expansion of logic in FreeIPA-provided database driver to
Kerberos KDC. Additionally, it requires development of Global Catalog Service
compatible with Active Directory. This is fairly isolated effort within
FreeIPA.
Other developers: no effect
Release engineering: N/A (not a System Wide Change)
Policies and guidelines: N/A (not a System Wide Change)
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
F20 Self Contained Change: DNSSEC support for FreeIPA
by Jaroslav Reznik
= Proposed Self Contained Change: DNSSEC support for FreeIPA =
https://fedoraproject.org/wiki/Changes/IPAv3DNSSEC
Change owner(s): Petr Špaček <pspacek(a)redhat.com>
FreeIPA with integrated DNS server will support serving of DNSSEC secured
zones.
== Detailed description ==
DNS server integrated to FreeIPA in Fedora 19 is not able to serve signed DNS
zones. New version of FreeIPA and bind-dyndb-ldap adds support for DNSSEC.
Zone maintenance (like perioding zone re-signing etc.) will be handled
automatically, so the administrative overhead should be minimal.
== Scope ==
This change will require major rewrite of bind-dyndb-ldap package and some
isolated changes in packages freeipa*.
Other developers: FreeIPA team has to prepare user interface for this feature.
(not a System Wide Change)
Release engineering: N/A (not a System Wide Change)
Policies and guidelines: N/A (not a System Wide Change)
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
10 years, 11 months
Re: F20 System Wide Change: SSD cache
by Rave it
Am Mon, 15 Jul 2013 19:42:29 +0000
schrieb devel-request(a)lists.fedoraproject.org:
> Message: 5
> Date: Mon, 15 Jul 2013 12:25:49 -0700
> From: Conrad Meyer <cemeyer(a)uw.edu>
> To: Development discussions related to Fedora
> <devel(a)lists.fedoraproject.org>
> Subject: Re: F20 System Wide Change: SSD cache
> Message-ID: <20130715122549.5f14299b@m>
> Content-Type: text/plain; charset=US-ASCII
>
> On Mon, 15 Jul 2013 13:57:39 -0400
> DJ Delorie <dj(a)redhat.com> wrote:
> > I think this is a bad idea, at least for my setup. I
> > really don't want my small expensive boot SSD being beaten
> > to death trying to cache a multi-terabyte array, especially
> > since I have plenty of RAM that already serves that purpose
> > (the machine rarely reboots).
>
> Actually, bcache is very good about *not* wearing out SSDs --
> it writes in giant erase block-sized portions and likely you
> can tune how much is written.
>
> And either of these layers must be turned on by an admin --
> it's not going to be shoved down your throat.
>
> > At the very least, this feature should be disabled if the
> > SSD is the boot/root drive. When SSDs fail, they fail
> > completely, and it's irresponsible to cause early failure
> > on a drive that's critical for booting and OS operation.
>
> By default, bcache runs a write-through cache -- it only
> caches clean data. If the caching SSD dies, the bcache layer
> can just forward requests to spinning drive. No data is lost.
>
> (Bcache has a writeback mode where data loss is possible. I
> do not recommend this mode.)
>
> > Also, I think such features should be postponed
> > until/unless there's a clear and obvious way to
> > configure/disable them that doesn't involve installing
> > additional packages or editing obscure text files.
>
> Again -- no one is forcing you to use this. It's opt-in.
>
> Conrad
Hmm,
for me me this is more a question how can i configure bcache or dm-cache in a system which use more than one SSD and some conventional hard-disk.
Seems like only you or some kernel devs know about how to do this.
Can you give a configuration example for f19?
For example, i use 4 SSD at a hardware-raid for my several systems (f17/f18/f19/rawhide), i called it A, i need this for testing compiz on baremetal for all current fedora releases.
On a second hardware-raid- controller i have 4 conventional disks to store my data, i called it B.
So, if i add another SSD for bcache or dm-cache, i called C, how can i configure it?
1. this configuration should not control disk A
2. disk C should use as cache for disk B
Is this possible to configure?
Do you have a link with more info's and configuration examples.
best regards,
Wolfgang
10 years, 11 months