Rebuilding proxy01.stg.fedoraproject.org 2010-08-06 23:30 UTC
by Stephen John Smoogen
The Fedora Infrastructure staging environment is in between
development and production. While we usually only deploy fixes and
changes via automated methods in production, and do almost everything
by hand in development... staging systems can be a mix of the two.
Thus the staging servers need a serious rebuild every now and then to
keep them up to par.
We will be rebuilding proxy01.stg.fedoraproject.org to make sure that
it meets CSI standards. The system should be down for about a half
hour to an hour and be back up with any extraneous things removed.
--
Stephen J Smoogen.
“The core skill of innovators is error recovery, not failure avoidance.”
Randy Nelson, President of Pixar University.
"We have a strategic plan. It's called doing things.""
— Herb Kelleher, founder Southwest Airlines
13 years, 9 months
Retire gstreamer-plugins-flumpegdemux in F14/devel?
by Chen Lei
sudo yum install gstreamer-plugins-flumpegdemux
Package gstreamer-plugins-flumpegdemux-0.10.15-8.fc13.x86_64 is
obsoleted by gstreamer-plugins-bad-free-0.10.19-1.fc13.x86_64 which is
already installed
Regards,
Chen Lei
13 years, 9 months
F-14 Branched report: 20100806 changes
by Fedora compose checker
Compose started at Fri Aug 6 13:15:30 UTC 2010
Broken deps for x86_64
----------------------------------------------------------
CGAL-3.6.1-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
CGAL-3.6.1-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_program_options-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_serialization-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
LuxRender-0.6.1-3.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_program_options-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_serialization-mt.so.1.41.0()(64bit)
LuxRender-core-0.6.1-3.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
Mayavi-3.3.0-1.fc13.x86_64 requires python(abi) = 0:2.6
Mayavi-3.3.0-1.fc13.x86_64 requires libpython2.6.so.1.0()(64bit)
PragmARC-20060427-6.fc13.i686 requires libgnarl-4.4.so
PragmARC-20060427-6.fc13.i686 requires libgnat-4.4.so
PragmARC-20060427-6.fc13.x86_64 requires libgnarl-4.4.so()(64bit)
PragmARC-20060427-6.fc13.x86_64 requires libgnat-4.4.so()(64bit)
QuantLib-test-1.0.1-3.fc14.x86_64 requires libboost_unit_test_framework.so.1.41.0()(64bit)
1:anjuta-2.30.0.0-2.fc14.i686 requires libgladeui-1.so.9
1:anjuta-2.30.0.0-2.fc14.i686 requires libwebkit-1.0.so.2
1:anjuta-2.30.0.0-2.fc14.i686 requires libdevhelp-1.so.1
1:anjuta-2.30.0.0-2.fc14.x86_64 requires libgladeui-1.so.9()(64bit)
1:anjuta-2.30.0.0-2.fc14.x86_64 requires libdevhelp-1.so.1()(64bit)
1:anjuta-2.30.0.0-2.fc14.x86_64 requires libwebkit-1.0.so.2()(64bit)
antlr3-python-3.1.2-7.fc14.noarch requires python(abi) = 0:2.6
avogadro-1.0.1-2.fc14.x86_64 requires libboost_python-mt.so.1.41.0()(64bit)
avogadro-libs-1.0.1-2.fc14.i686 requires libboost_python-mt.so.1.41.0
avogadro-libs-1.0.1-2.fc14.x86_64 requires libboost_python-mt.so.1.41.0()(64bit)
bastet-0.43-7.fc13.x86_64 requires libboost_program_options.so.1.41.0()(64bit)
cairo-java-1.0.5-12.fc12.i686 requires libgcj.so.10
cairo-java-1.0.5-12.fc12.x86_64 requires libgcj.so.10()(64bit)
cyphesis-0.5.21-2.fc13.x86_64 requires libpython2.6.so.1.0()(64bit)
easystroke-0.5.3-1.fc14.x86_64 requires libboost_serialization-mt.so.1.41.0()(64bit)
ekg2-python-0.2-0.12.rc1.fc14.x86_64 requires libpython2.6.so.1.0()(64bit)
evolution-couchdb-0.4.92-1.fc14.x86_64 requires libedata-book-1.2.so.2()(64bit)
evolution-couchdb-0.4.92-1.fc14.x86_64 requires libcamel-1.2.so.17()(64bit)
evolution-couchdb-0.4.92-1.fc14.x86_64 requires libgtkhtml-editor.so.0()(64bit)
evolution-couchdb-0.4.92-1.fc14.x86_64 requires libebook-1.2.so.9()(64bit)
evolution-couchdb-0.4.92-1.fc14.x86_64 requires libcamel-provider-1.2.so.17()(64bit)
evolution-sharp-0.21.1-7.fc14.x86_64 requires libebook-1.2.so.9()(64bit)
evolution-sharp-0.21.1-7.fc14.x86_64 requires libecal-1.2.so.7()(64bit)
fmt-ptrn-java-1.3.20-5.fc13.i686 requires libgcj.so.10
fmt-ptrn-java-1.3.20-5.fc13.x86_64 requires libgcj.so.10()(64bit)
frysk-0.4-26.fc14.x86_64 requires libgcj.so.10()(64bit)
frysk-devel-0.4-26.fc14.i386 requires libgcj.so.10
frysk-devel-0.4-26.fc14.x86_64 requires libgcj.so.10()(64bit)
frysk-gnome-0.4-26.fc14.x86_64 requires libgcj.so.10()(64bit)
fuse-encfs-1.5-12.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
fuse-encfs-1.5-12.fc14.i686 requires libboost_serialization-mt.so.1.41.0
fuse-encfs-1.5-12.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
fuse-encfs-1.5-12.fc14.x86_64 requires libboost_serialization-mt.so.1.41.0()(64bit)
fusecompress-2.6-6.20100223git754bc0de.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
fusecompress-2.6-6.20100223git754bc0de.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
fusecompress-2.6-6.20100223git754bc0de.fc14.x86_64 requires libboost_program_options-mt.so.1.41.0()(64bit)
fusecompress-2.6-6.20100223git754bc0de.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
fusecompress-2.6-6.20100223git754bc0de.fc14.x86_64 requires libboost_serialization-mt.so.1.41.0()(64bit)
glib-java-0.2.6-16.fc12.i686 requires libgcj.so.10
glib-java-0.2.6-16.fc12.x86_64 requires libgcj.so.10()(64bit)
glom-1.14.1-2.fc14.x86_64 requires libboost_python.so.1.41.0()(64bit)
glom-libs-1.14.1-2.fc14.i686 requires libboost_python.so.1.41.0
glom-libs-1.14.1-2.fc14.x86_64 requires libboost_python.so.1.41.0()(64bit)
gnomeradio-1.8-6.fc14.x86_64 requires libgnome-media-profiles.so.0()(64bit)
gpx-viewer-0.1.2-2.fc14.x86_64 requires libchamplain-gtk-0.4.so.0()(64bit)
gpx-viewer-0.1.2-2.fc14.x86_64 requires libchamplain-0.4.so.0()(64bit)
intellij-idea-9.0.1.94.399-11.fc14.x86_64 requires jna-examples
kdeedu-math-4.4.95-1.fc14.py27.x86_64 requires libboost_python-mt.so.1.41.0()(64bit)
libgconf-java-2.12.4-14.fc12.i686 requires libgcj.so.10
libgconf-java-2.12.4-14.fc12.x86_64 requires libgcj.so.10()(64bit)
libglade-java-2.12.5-12.fc12.i686 requires libgcj.so.10
libglade-java-2.12.5-12.fc12.x86_64 requires libgcj.so.10()(64bit)
libgnome-java-2.12.4-12.fc12.i686 requires libgcj.so.10
libgnome-java-2.12.4-12.fc12.x86_64 requires libgcj.so.10()(64bit)
libgtk-java-2.8.7-13.fc13.i686 requires libgcj.so.10
libgtk-java-2.8.7-13.fc13.x86_64 requires libgcj.so.10()(64bit)
libopenvrml-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
libopenvrml-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
libopenvrml-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
libopenvrml-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
libopenvrml-gl-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
libopenvrml-gl-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
libopenvrml-gl-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
libopenvrml-gl-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
libpst-python-0.6.47-4.fc14.x86_64 requires libboost_python.so.1.41.0()(64bit)
libvirt-qpid-0.2.18-1.fc14.x86_64 requires libqmf.so.1()(64bit)
libvte-java-0.12.1-15.fc12.i686 requires libgcj.so.10
libvte-java-0.12.1-15.fc12.x86_64 requires libgcj.so.10()(64bit)
lyx-2.0.0-0.5.alpha5.fc14.x86_64 requires libboost_signals-mt.so.1.41.0()(64bit)
lyx-2.0.0-0.5.alpha5.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
matahari-0.0.5-1.fc14.x86_64 requires libqmf.so.1()(64bit)
mine_detector-6.0-3.fc13.x86_64 requires libgnat-4.4.so()(64bit)
mingw32-OpenSceneGraph-2.8.2-4.fc14.noarch requires mingw32(libpng-3.dll)
mkvtoolnix-4.0.0-2.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
mkvtoolnix-4.0.0-2.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
mkvtoolnix-4.0.0-2.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
mkvtoolnix-gui-4.0.0-2.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
mkvtoolnix-gui-4.0.0-2.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
mkvtoolnix-gui-4.0.0-2.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
openvrml-java-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
openvrml-java-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
openvrml-javascript-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
openvrml-javascript-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
openvrml-nodes-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
openvrml-nodes-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
openvrml-xembed-0.18.6-1.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
openvrml-xembed-0.18.6-1.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
ovirt-server-0.100-4.fc12.noarch requires qpidd
ovirt-server-0.100-4.fc12.noarch requires qpidc
perl-Config-Model-1.205-2.fc14.noarch requires perl(YAML::Any) >= 0:0.303
perl-Data-Alias-1.07-6.fc13.x86_64 requires perl(:MODULE_COMPAT_5.10.1)
perl-Pugs-Compiler-Rule-0.37-4.fc13.noarch requires perl(:MODULE_COMPAT_5.10.1)
plee-the-bear-0.4.1-5.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
plee-the-bear-0.4.1-5.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
plee-the-bear-0.4.1-5.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_program_options-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
pokerth-0.7.1-4.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
pulsecaster-0.1.6-2.fc14.noarch requires python(abi) = 0:2.6
pybackpack-0.5.7-4.fc14.noarch requires gnome-python2-brasero
pyexiv2-0.1.3-10.fc14.x86_64 requires libboost_python.so.1.41.0()(64bit)
python-docs-2.6.5-1.fc14.noarch requires python = 0:2.6.5
python-eventlet-0.9.7-1.fc14.noarch requires python(abi) = 0:2.6
python-polybori-0.5-8.fc14.i686 requires libboost_python.so.1.41.0
python-polybori-0.5-8.fc14.x86_64 requires libboost_python.so.1.41.0()(64bit)
python3-beaker-1.5.3-5.fc14.noarch requires python3-paste
qgis-python-1.5.0-2.fc14.i686 requires libpython2.6.so.1.0
qgis-python-1.5.0-2.fc14.i686 requires python(abi) = 0:2.6
qgis-python-1.5.0-2.fc14.x86_64 requires python(abi) = 0:2.6
qgis-python-1.5.0-2.fc14.x86_64 requires libpython2.6.so.1.0()(64bit)
qtgpsc-0.2.3-6.fc12.x86_64 requires libgps.so.18()(64bit)
spacewalk-certs-tools-1.1.1-1.1.fc14.noarch requires spacewalk-backend-libs >= 0:0.8.28
spring-0.81.2.1-2.fc13.x86_64 requires libboost_thread-mt.so.1.41.0()(64bit)
spring-0.81.2.1-2.fc13.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
spring-0.81.2.1-2.fc13.x86_64 requires libboost_program_options-mt.so.1.41.0()(64bit)
spring-0.81.2.1-2.fc13.x86_64 requires libboost_signals-mt.so.1.41.0()(64bit)
spring-0.81.2.1-2.fc13.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
springlobby-0.80-2.fc14.x86_64 requires libboost_system-mt.so.1.41.0()(64bit)
sugar-paint-27-2.fc14.x86_64 requires python(abi) = 0:2.6
sugar-read-79-1.fc14.noarch requires gnome-python2-evince
urg-0.8.7-2.fc13.i686 requires libboost_filesystem-mt.so.1.41.0
urg-0.8.7-2.fc13.x86_64 requires libboost_filesystem-mt.so.1.41.0()(64bit)
viking-0.9.91-3.fc13.x86_64 requires libgps.so.18()(64bit)
vtk-examples-5.6.0-36.fc14.x86_64 requires vtkdata = 0:5.6.0
vtk-testing-5.6.0-36.fc14.x86_64 requires vtkdata = 0:5.6.0
wesnoth-1.8.3-1.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
wesnoth-1.8.3-1.fc14.x86_64 requires libboost_regex-mt.so.1.41.0()(64bit)
wesnoth-server-1.8.3-1.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
wesnoth-tools-1.8.3-1.fc14.x86_64 requires libboost_iostreams-mt.so.1.41.0()(64bit)
wfut-1.1.0-8.fc12.x86_64 requires libgcj.so.10()(64bit)
xenner-0.48-1.fc14.x86_64 requires libxenguest.so.3.4()(64bit)
Broken deps for i386
----------------------------------------------------------
CGAL-3.6.1-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_program_options-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_system-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_thread-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_serialization-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
LuxRender-0.6.1-3.fc14.i686 requires libboost_regex-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_program_options-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_system-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_thread-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_serialization-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
LuxRender-core-0.6.1-3.fc14.i686 requires libboost_regex-mt.so.1.41.0
Mayavi-3.3.0-1.fc13.i686 requires libpython2.6.so.1.0
Mayavi-3.3.0-1.fc13.i686 requires python(abi) = 0:2.6
PragmARC-20060427-6.fc13.i686 requires libgnarl-4.4.so
PragmARC-20060427-6.fc13.i686 requires libgnat-4.4.so
QuantLib-test-1.0.1-3.fc14.i686 requires libboost_unit_test_framework.so.1.41.0
1:anjuta-2.30.0.0-2.fc14.i686 requires libgladeui-1.so.9
1:anjuta-2.30.0.0-2.fc14.i686 requires libwebkit-1.0.so.2
1:anjuta-2.30.0.0-2.fc14.i686 requires libdevhelp-1.so.1
antlr3-python-3.1.2-7.fc14.noarch requires python(abi) = 0:2.6
avogadro-1.0.1-2.fc14.i686 requires libboost_python-mt.so.1.41.0
avogadro-libs-1.0.1-2.fc14.i686 requires libboost_python-mt.so.1.41.0
bastet-0.43-7.fc13.i686 requires libboost_program_options.so.1.41.0
cairo-java-1.0.5-12.fc12.i686 requires libgcj.so.10
cyphesis-0.5.21-2.fc13.i686 requires libpython2.6.so.1.0
easystroke-0.5.3-1.fc14.i686 requires libboost_serialization-mt.so.1.41.0
ekg2-python-0.2-0.12.rc1.fc14.i686 requires libpython2.6.so.1.0
evolution-couchdb-0.4.92-1.fc14.i686 requires libcamel-provider-1.2.so.17
evolution-couchdb-0.4.92-1.fc14.i686 requires libebook-1.2.so.9
evolution-couchdb-0.4.92-1.fc14.i686 requires libgtkhtml-editor.so.0
evolution-couchdb-0.4.92-1.fc14.i686 requires libedata-book-1.2.so.2
evolution-couchdb-0.4.92-1.fc14.i686 requires libcamel-1.2.so.17
evolution-sharp-0.21.1-7.fc14.i686 requires libecal-1.2.so.7
evolution-sharp-0.21.1-7.fc14.i686 requires libebook-1.2.so.9
fmt-ptrn-java-1.3.20-5.fc13.i686 requires libgcj.so.10
frysk-0.4-26.fc14.i386 requires libgcj.so.10
frysk-devel-0.4-26.fc14.i386 requires libgcj.so.10
frysk-gnome-0.4-26.fc14.i386 requires libgcj.so.10
fuse-encfs-1.5-12.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
fuse-encfs-1.5-12.fc14.i686 requires libboost_serialization-mt.so.1.41.0
fusecompress-2.6-6.20100223git754bc0de.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
fusecompress-2.6-6.20100223git754bc0de.fc14.i686 requires libboost_program_options-mt.so.1.41.0
fusecompress-2.6-6.20100223git754bc0de.fc14.i686 requires libboost_system-mt.so.1.41.0
fusecompress-2.6-6.20100223git754bc0de.fc14.i686 requires libboost_serialization-mt.so.1.41.0
fusecompress-2.6-6.20100223git754bc0de.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
glib-java-0.2.6-16.fc12.i686 requires libgcj.so.10
glom-1.14.1-2.fc14.i686 requires libboost_python.so.1.41.0
glom-libs-1.14.1-2.fc14.i686 requires libboost_python.so.1.41.0
gnomeradio-1.8-6.fc14.i686 requires libgnome-media-profiles.so.0
gpx-viewer-0.1.2-2.fc14.i686 requires libchamplain-gtk-0.4.so.0
gpx-viewer-0.1.2-2.fc14.i686 requires libchamplain-0.4.so.0
intellij-idea-9.0.1.94.399-11.fc14.i686 requires jna-examples
kdeedu-math-4.4.95-1.fc14.py27.i686 requires libboost_python-mt.so.1.41.0
libgconf-java-2.12.4-14.fc12.i686 requires libgcj.so.10
libglade-java-2.12.5-12.fc12.i686 requires libgcj.so.10
libgnome-java-2.12.4-12.fc12.i686 requires libgcj.so.10
libgtk-java-2.8.7-13.fc13.i686 requires libgcj.so.10
libopenvrml-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
libopenvrml-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
libopenvrml-gl-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
libopenvrml-gl-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
libpst-python-0.6.47-4.fc14.i686 requires libboost_python.so.1.41.0
libvirt-qpid-0.2.18-1.fc14.i686 requires libqmf.so.1
libvte-java-0.12.1-15.fc12.i686 requires libgcj.so.10
lyx-2.0.0-0.5.alpha5.fc14.i686 requires libboost_signals-mt.so.1.41.0
lyx-2.0.0-0.5.alpha5.fc14.i686 requires libboost_regex-mt.so.1.41.0
matahari-0.0.5-1.fc14.i686 requires libqmf.so.1
mine_detector-6.0-3.fc13.i686 requires libgnat-4.4.so
mingw32-OpenSceneGraph-2.8.2-4.fc14.noarch requires mingw32(libpng-3.dll)
mkvtoolnix-4.0.0-2.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
mkvtoolnix-4.0.0-2.fc14.i686 requires libboost_system-mt.so.1.41.0
mkvtoolnix-4.0.0-2.fc14.i686 requires libboost_regex-mt.so.1.41.0
mkvtoolnix-gui-4.0.0-2.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
mkvtoolnix-gui-4.0.0-2.fc14.i686 requires libboost_system-mt.so.1.41.0
mkvtoolnix-gui-4.0.0-2.fc14.i686 requires libboost_regex-mt.so.1.41.0
openvrml-java-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
openvrml-java-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
openvrml-javascript-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
openvrml-javascript-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
openvrml-nodes-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
openvrml-nodes-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
openvrml-xembed-0.18.6-1.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
openvrml-xembed-0.18.6-1.fc14.i686 requires libboost_thread-mt.so.1.41.0
ovirt-server-0.100-4.fc12.noarch requires qpidd
ovirt-server-0.100-4.fc12.noarch requires qpidc
perl-Config-Model-1.205-2.fc14.noarch requires perl(YAML::Any) >= 0:0.303
perl-Data-Alias-1.07-6.fc13.i686 requires perl(:MODULE_COMPAT_5.10.1)
perl-Pugs-Compiler-Rule-0.37-4.fc13.noarch requires perl(:MODULE_COMPAT_5.10.1)
plee-the-bear-0.4.1-5.fc14.i386 requires libboost_filesystem-mt.so.1.41.0
plee-the-bear-0.4.1-5.fc14.i386 requires libboost_system-mt.so.1.41.0
plee-the-bear-0.4.1-5.fc14.i386 requires libboost_thread-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_filesystem-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_program_options-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_system-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_thread-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
pokerth-0.7.1-4.fc14.i686 requires libboost_regex-mt.so.1.41.0
pulsecaster-0.1.6-2.fc14.noarch requires python(abi) = 0:2.6
pybackpack-0.5.7-4.fc14.noarch requires gnome-python2-brasero
pyexiv2-0.1.3-10.fc14.i686 requires libboost_python.so.1.41.0
python-docs-2.6.5-1.fc14.noarch requires python = 0:2.6.5
python-eventlet-0.9.7-1.fc14.noarch requires python(abi) = 0:2.6
python-polybori-0.5-8.fc14.i686 requires libboost_python.so.1.41.0
python-psyco-1.6-4.fc12.i686 requires libpython2.6.so.1.0
python-psyco-1.6-4.fc12.i686 requires python(abi) = 0:2.6
python3-beaker-1.5.3-5.fc14.noarch requires python3-paste
qgis-python-1.5.0-2.fc14.i686 requires libpython2.6.so.1.0
qgis-python-1.5.0-2.fc14.i686 requires python(abi) = 0:2.6
qtgpsc-0.2.3-6.fc12.i686 requires libgps.so.18
spacewalk-certs-tools-1.1.1-1.1.fc14.noarch requires spacewalk-backend-libs >= 0:0.8.28
spring-0.81.2.1-2.fc13.i686 requires libboost_program_options-mt.so.1.41.0
spring-0.81.2.1-2.fc13.i686 requires libboost_system-mt.so.1.41.0
spring-0.81.2.1-2.fc13.i686 requires libboost_signals-mt.so.1.41.0
spring-0.81.2.1-2.fc13.i686 requires libboost_thread-mt.so.1.41.0
spring-0.81.2.1-2.fc13.i686 requires libboost_regex-mt.so.1.41.0
springlobby-0.80-2.fc14.i686 requires libboost_system-mt.so.1.41.0
sugar-paint-27-2.fc14.i686 requires python(abi) = 0:2.6
sugar-read-79-1.fc14.noarch requires gnome-python2-evince
urg-0.8.7-2.fc13.i686 requires libboost_filesystem-mt.so.1.41.0
viking-0.9.91-3.fc13.i686 requires libgps.so.18
vtk-examples-5.6.0-36.fc14.i686 requires vtkdata = 0:5.6.0
vtk-testing-5.6.0-36.fc14.i686 requires vtkdata = 0:5.6.0
wesnoth-1.8.3-1.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
wesnoth-1.8.3-1.fc14.i686 requires libboost_regex-mt.so.1.41.0
wesnoth-server-1.8.3-1.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
wesnoth-tools-1.8.3-1.fc14.i686 requires libboost_iostreams-mt.so.1.41.0
wfut-1.1.0-8.fc12.i686 requires libgcj.so.10
xenner-0.48-1.fc14.i386 requires libxenguest.so.3.4
Removed package gstreamer-plugins-flumpegdemux
Summary:
Added Packages: 0
Removed Packages: 1
Modified Packages: 0
13 years, 9 months
haldaemon seems dead...
by Paul F. Johnson
Hi,
I've installed F13 on my home box, updated and then moved it to rawhide.
Everything seems more or less happy now, but it looks like haldaemon is
dead. I can't burn to DVD, USB pens won't mount, the printer is unrecognised
and the SCSI scanner has gone. All worked fine under F13.
Any clues on how to get things running? Last updated the machine this
morning (it will have caught yesterdays updates)
TTFN
Paul
13 years, 9 months
F14TC2 x86_64 problem
by Paul F. Johnson
Hi,
Is there a way around this problem?
I'm trying to install from DVD the TC2 image on the laptop (HP DV6 2113SA).
When I click to trash the HD, the installer dies on me saying there is an
error and asking me if I want to debug. I get the same problem if I try to
do a custom set up. Trying the other options - shrink thinks everything is
0Mb in size and everything else is just not happy.
TTFN
Paul
13 years, 9 months
dist-git tag question
by Peter Hutterer
Apologies if this was asked for and answered in another thread, I lost
overview. Ralf and Kevin made me realise something that I have
misinterpreted initially in regards to how packages are tagged now.
https://fedoraproject.org/wiki/Using_Fedora_GIT claims that tagging is not
necessary and that the commitid is now submitted to koji. fair enough, but
the confusing thing here is:
"When successful on Koji, the build will trigger the package to be tagged
with the corresponding tag (e.g., dist-f15 for Rawhide [...]"
does this mean the dist-f15 tag is forcibly updated each time a build is
successful? If so, where is this tag hiding? I can't seem to get it into my
repo even though it is listed as a koji tag in the emails. Or are we not
talking about git tags here anyway?
The other question and that may just be a feature request:
the CVS tags are still visible in my repo, e.g.
mtdev-1_0_1-1_20100706_fc14. these tags are useful, because in a few weeks
time I won't be able to remember the commit ID of a specific version (I know
I can get it from the logs, but it's annoying).
If a build succeeds and is to be released as a package, can koji apply the
tag again to the git repo? It would allow for simple things like git diff
foo-1.1-2.fc12..foo-1.1-3.fc13.
Cheers,
Peter
13 years, 9 months
Fedora 14 branching and dist-git roll out
by Jesse Keating
Hey all! It's that time again, we're gearing up to branch for Fedora 14
this coming Tuesday! There is a major twist this time around, we're
going to attempt a roll out of dist-git!
Dist-git is our replacement for the CVS system we are currently using.
This is a pretty big deal, but we're going to try to make it as smooth
as possible. In the next few days I'll be finalizing our git server
setup and polishing up the user interface tool you all will be using to
interact with the source control and build system.
The conversion will take a couple days, which means our normal short
outage for branching will be a bit extended. I wish there was another
way, but converting over 9K cvs repos into git repos does take some
time. I really feel that this move is worth the extended outage.
The tool you all will use to interact with git and the buildsystem is
called "fedpkg". It comes from the fedora-packager package. There is a
version of it available now in all active Fedora and EPEL releases,
although it is built to work against our staging environment where we
have been testing the setup for a while. This setup is slightly
different than the final version, but you can install it and poke around
the help system to get a feel for what's going on. Most of the make
targets have made it over and are named the same; build, sources, srpm,
etc... Many of the targets can take arguments and options. Where the
make system used shell variables, fedpkg uses options and arguments.
Each target takes a --help argument that will show any available
options. Fedpkg does not yet have a man page, that may be coming soon.
We're also going to be working on wiki pages to document the new stuff
and archive the old stuff. We're going to need help on this too, so if
you want to pitch in, by all means!
As I mentioned above, this is an attempt. We are trying this pretty
early, which I wouldn't normally do. However we have a good roll back
plan. We are going to keep the CVS server as is, although turned
read-only during and after the dist-git rollout. If something fails
beyond reasonable repair with the dist-git attempt we will re-enable
write access to the CVS server (after we branch it for Fedora 14).
Otherwise we will keep it around, in some capacity, as a read-only
reference point.
I'm certain we will run into some bumps along the way, and some wrinkles
to iron out. I ask that you are patient with us as we work through
these, and as we either get updates pushed out of fedpkg or make
adjustments to the git repos on the git server. This transition has
been a long time coming, and I'm really happy to be the one to make it
happen. Keep in mind that this will be the first iteration of our
transition, and it will operate mostly the same as dist-cvs did with a
few improvements. Later on we will start to explore more interesting
advancements such as automatic patch management with exploded sources,
linking to upstream source repositories, automatic %changelog generation
from git changelogs, or things I haven't even thought about. Most of
all, we won't be using CVS any more and that feels really good to me.
If you're curious about how the new system will work or have concerns,
or want to help, you can reply to this email thread or find me on IRC as
"Oxf13" (that's an o, not a zero). If you run across bugs in fedpkg,
you can file them in the fedora-packager hosted trac space
https://fedorahosted.org/fedora-packager/ or just find me on IRC as well.
Thanks again for your patience, both in waiting so long for us to make
this move, and for bearing with us during the transition.
--
Jesse Keating
Fedora -- Freedom² is a feature!
identi.ca: http://identi.ca/jkeating
_______________________________________________
devel-announce mailing list
devel-announce(a)lists.fedoraproject.org
https://admin.fedoraproject.org/mailman/listinfo/devel-announce
13 years, 9 months
Removing branch for package without ACL permission
by Petr Pisar
Hello,
I have a commit access but ACL to SDL package. I have created new branch
on the server accidentally. I'd like to remove it, however I'm denied to
do it:
$ git push origin :origin/f13
remote: + refs/heads/origin/f13 SDL ppisar DENIED by fallthru
remote: error: hook declined to update refs/heads/origin/f13
To ssh://ppisar@pkgs.fedoraproject.org/SDL
! [remote rejected] origin/f13 (hook declined)
error: failed to push some refs to 'ssh://ppisar@pkgs.fedoraproject.org/SDL'
I guess a person with ACL permission (e.g. SDL owner) is able to do so.
Is it intentional feature or just a not yet resolved issue?
-- Petr
13 years, 9 months