Test1 delayed until Tuesday
by Elliot Lee
Hi hackers,
Due to a respin and a resulting delay in making available to mirrors, Test1 will be public on Tuesday the 15th at earliest. Sorry for the delay - hope you try it out nonetheless.
Best,
-- Elliot
19 years, 2 months
USB card reader gone again
by Paul F. Johnson
Hi,
I'm using the 2.6.11-1.1177_FC4 kernel and am trying to get my 7 in 1
card reader to read an SD card from my camera. This has worked in the
past by me including
options scsi_mod max_luns=8
and then
/sbin/mkinitrd -f /boot/initrd-2.6.11-1.1177_FC4 /boot/2.6.11-1.1177_FC4
and a reboot
and that's all that is required - it certainly has worked in the past.
/sbin/lsusb is showing
Bus 003 Device 007: ID 55aa:b012 OnSpec Electronic, Inc.
Bus 003 Device 002: ID 03f0:3004 Hewlett-Packard
which is the card reader and my printer respectively.
/proc/bus/usb/devices shows
T: Bus=03 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 3
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 2.06
S: Manufacturer=Linux 2.6.11-1.1177_FC4 ohci_hcd
S: Product=OHCI Host Controller
S: SerialNumber=0000:00:02.1
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=03 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=3004 Rev= 1.00
S: Manufacturer=Hewlett-Packard
S: Product=DeskJet 980C
S: SerialNumber=ES16B190F0OF
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
T: Bus=03 Lev=01 Prnt=01 Port=02 Cnt=02 Dev#= 7 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=55aa ProdID=b012 Rev= 1.01
C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr=200mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50
Driver=usb-storage
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
So it is showing up.
Any ideas on how to get this working again or should I bugzilla it? It
has worked in the past.
TTFN
Paul
--
"I like blinking me" - Helen, Big Brother 2 contestant
19 years, 2 months
Fedora repository layout proposal
by Panu Matilainen
While testing repoquery I noticed that the FC updates repository metadata
doesn't include the SRPMS directories at all. So far nothing has used the
SRPMS information but that's changing: yum-src for doing things like
installing build-dependencies is planned/in the works and repoquery can
already use that info, for example:
[pmatilai@chip ~]$ repoquery.py --source -l yum
yum-2.1.11.tar.gz
yum-ia32e-2.1.11.patch
yum.conf.fedora
yum.spec
Would be nice to have this fixed, at least in FC4 but why not FC3 updates
as well, shouldn't be terribly hard :)
While at it, it might make sense to split out the repository metadata
somewhat as suggested by Seth here:
https://lists.dulug.duke.edu/pipermail/yum-devel/2005-March/000833.html
In short: split SRPMS, debuginfo and the actual binaries to separate
repositories: most people will never need the debuginfo and source
packages yet having all those lumped into the main repodata slows down yum
operations and causes unnecessary network traffic as well.
- Panu -
19 years, 2 months
RE: rawhide report: 20050310 changes
by Harnish, Joseph
The main developers of DKMS are on the linux-poweredge at dell dot com
mailing list. They would be able to help shed some light on this.
Joe
-----Original Message-----
From: fedora-devel-list-bounces(a)redhat.com
[mailto:fedora-devel-list-bounces@redhat.com] On Behalf Of Jason L Tibbitts
III
Sent: Friday, March 11, 2005 12:19 PM
To: Development discussions related to Fedora Core
Subject: Re: rawhide report: 20050310 changes
>>>>> "RE" == Ralf Ertzinger <fedora-devel(a)camperquake.de> writes:
RE> It would require to make the development package a requirement for
RE> every install.
Only if you use DKMS as is. But if you take it as a starting point
(i.e. what Mr. Rugolsky suggested) and make its output not an
installed module but a kernel-module-whatever RPM then end users
wouldn't need the development packages.
I guess the question is whether DKMS can be so modified and if so
whether the result would be better than whatever other solutions
people have come up with.
- J<
--
fedora-devel-list mailing list
fedora-devel-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-devel-list
19 years, 2 months
hald causing stutters
by Rodd Clarkson
Since updating last night, I've notice that my system is stuttering.
The UI will pause for a moment and then go along and then pause, and
then go along and well you get what I mean by stuttering.
Watching my CPU use, I get a spike every 5 seconds (a cheap one thousand
and one, two thousand and two quess).
Looking at top, I see hald taking a good chunk of CPU about the same
time as the spike occurs.
This is really quite annoying. It's essentially a pause in your UI
every 5 seconds or so, including music that's playing and the likes.
Is anyone else seeing this (and hopefully addressing it)? And does
someone have a stop gap for it until it's resolved?
Rodd
19 years, 2 months
Re: Inotify & gamin
by Rahul Sundaram
--- "Neil J. Patel" <njp(a)santram.co.uk> wrote:
> Hi,
>
> I wanted to know if the fc4 kernals will ship
> with inotify, and/if
> gamin will be built to support this ?
>
gamin already checks for inotify before falling back
on dnotify. The actual inotify feature will have to
merged upstream probably before fc can ship it
Regards
Rahul Sundaram
__________________________________
Do you Yahoo!?
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/
19 years, 2 months
Self-Introduction: Ralf Ertzinger
by Ralf Ertzinger
Hi.
I have been reading (and writing) on this list for some time, but have not
made a formal introduction yet. Sorry for that, this shall be remedied.
My full (legal) name is Ralf Ertzinger. I live in Kiel, northern Germany, and
am a student of meteorology, currently writing my diploma thesis. I am working
part time for a local company providing meteorological services doing model
implementation and system administration. I have worked for a local ISP before,
doing system and network administration. I have been working with RPM for
several years for local packaging, none of this has been published.
My immediate goal is to get the beep media player into FE, longer term to
try and get enlighenment CVS into FE. If time permits, I am willing to do QA,
if time permits.
I have not taken part in any open source projects, yet. I am fluent in perl,
bash, not-so-fluent in PHP, I can read C and fix things if the code is not
too obfuscated, but I do not really like the language. Partial FORTRAN,
hardly python.
I can think of no good reason why anyone not knowing me in person ought
to trust me more than necessary, after all, I could have made all this up.
I did not, but you can not reliably check this. My current signature was
randomly generated. I swear.
I have a gpg key, but not for the address I am currently posting with.
The key is for ralf(a)camperquake.de and ralf(a)skytale.net, is available
at the ususal places, and reads like this:
[sun@nausicaa ~ :) 7]$ gpg --fingerprint ralf(a)camperquake.de
pub 1024D/08DBE734 2003-04-02
Key fingerprint = D730 32DF DC4F 6217 11A7 A712 A3C3 5151 08DB E734
uid Ralf Ertzinger <ralf(a)skytale.net>
uid Ralf Ertzinger <ralf(a)camperquake.de>
sub 2048g/5AA35A72 2003-04-02
--
"This isn't all true." -- Steven Wright
19 years, 2 months
RE: Yum errors after yesterdays update
by Harnish, Joseph
Cool. That did the trick.
Thanks Jef.
Joe
-----Original Message-----
From: fedora-devel-list-bounces(a)redhat.com
[mailto:fedora-devel-list-bounces@redhat.com] On Behalf Of Jeff Spaleta
Sent: Friday, March 11, 2005 9:59 AM
To: Development discussions related to Fedora Core
Subject: Re: Yum errors after yesterdays update
On Fri, 11 Mar 2005 09:54:07 -0500, Harnish, Joseph
<jharnish(a)ci.grand-rapids.mi.us> wrote:
> I nuked the sqlite files in /var/cache/yum/development but it still fails.
you need to install the older sqlite3 package which sqlite package
replaces.
you should not install the sqlite packages again until there is an
update for python-sqlite*
-jef
--
fedora-devel-list mailing list
fedora-devel-list(a)redhat.com
http://www.redhat.com/mailman/listinfo/fedora-devel-list
19 years, 2 months
Inotify & gamin
by Neil J. Patel
Hi,
I wanted to know if the fc4 kernals will ship with inotify, and/if
gamin will be built to support this ?
Neil
19 years, 2 months