Since I wasn't able to get F9 Preview or Beta installed, I d/l F9 Preview Live CD and booted it. It almost did not boot. I was getting all kinds of weird block device errors and a lot of trouble reading the cd with errors on /dev/sr0 like (and I verified the media - it was good):
Buffer I/O error on device sr0, logical block 0462 end_request, I/O error, dev sr0, sector 33840 Unable to find persistent overlay; using temporary Red Hat Nash version 6.0.47 starting Setting up new root fs no fstab.sys, mounting internal defaults unmounting old /dev unmounting old [bunch of icon chars like hearts and things] unmounting old /sys Welcome to Fedora
Once it finally did boot I went in and sent a smolt profile of my machine. It is here: http://www.smolts.org/client/show/pub_a85342c8-29ef-4208-a216-161ee87bcb2f
With all the weird errors I've seen I think that F9 is having some difficulty with the SATA/IDE controllers/drives. This machine has three SATA controllers: Gigabyte 2 int 2 ext AMD660 4 int HighPoint 2300 4 int
Gerry
Here is a 'dmesg' from the F9-Preview Live CD boot sequence:
Initializing cgroup subsys cpuset Initializing cgroup subsys cpu Linux version 2.6.25-0.234.rc9.git1.fc9.i686 (mockbuild@) (gcc version 4.3.0 20080404 (Red Hat 4.3.0-6) (GCC) ) #1 SMP Tue Apr 15 18:37:15 EDT 2008 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 0000000000098800 (usable) BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfee0000 (usable) BIOS-e820: 00000000cfee0000 - 00000000cfee3000 (ACPI NVS) BIOS-e820: 00000000cfee3000 - 00000000cfef0000 (ACPI data) BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 0000000130000000 (usable) Warning only 4GB will be used. Use a HIGHMEM64G enabled kernel. 3200MB HIGHMEM available. 896MB LOWMEM available. Scan SMP from c0000000 for 1024 bytes. Scan SMP from c009fc00 for 1024 bytes. Scan SMP from c00f0000 for 65536 bytes. found SMP MP-table at [c00f56e0] 000f56e0 Using x86 segment limits to approximate NX protection Entering add_active_range(0, 0, 1048576) 0 entries of 256 used Zone PFN ranges: DMA 0 -> 4096 Normal 4096 -> 229376 HighMem 229376 -> 1048576 Movable zone start PFN for each node early_node_map[1] active PFN ranges 0: 0 -> 1048576 On node 0 totalpages: 1048576 DMA zone: 32 pages used for memmap DMA zone: 0 pages reserved DMA zone: 4064 pages, LIFO batch:0 Normal zone: 1760 pages used for memmap Normal zone: 223520 pages, LIFO batch:31 HighMem zone: 6400 pages used for memmap HighMem zone: 812800 pages, LIFO batch:31 Movable zone: 0 pages used for memmap DMI 2.4 present. Using APIC driver default ACPI: RSDP 000F70D0, 0014 (r0 GBT ) ACPI: RSDT CFEE3000, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: FACP CFEE3040, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: DSDT CFEE30C0, 66F8 (r1 GBT GBTUACPI 1000 MSFT 3000000) ACPI: FACS CFEE0000, 0040 ACPI: SSDT CFEE9880, 0544 (r1 PTLTD POWERNOW 1 LTP 1) ACPI: HPET CFEE9E00, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) ACPI: MCFG CFEE9E40, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ACPI: APIC CFEE97C0, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) ATI board detected. Disabling timer routing over 8254. ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 0:2 APIC version 16 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 0:2 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) Processor #2 0:2 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled) Processor #3 0:2 APIC version 16 ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 33, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs ACPI: HPET id: 0x10b9a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at d0000000 (gap: cff00000:10100000) PM: Registered nosave memory: 0000000000098000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1040384 Kernel command line: initrd=initrd0.img root=CDLABEL=Fedora-9-PR-i686-20080416 rootfstype=iso9660 ro quiet liveimg rhgb BOOT_IMAGE=vmlinuz0 mapped APIC to ffffb000 (fee00000) mapped IOAPIC to ffffa000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c07b8000 soft=c0798000 PID hash table entries: 4096 (order: 12, 16384 bytes) Detected 2511.490 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) Memory: 3362780k/4194304k available (2234k kernel code, 42704k reserved, 1119k data, 284k init, 2489216k highmem) virtual kernel memory layout: fixmap : 0xffc53000 - 0xfffff000 (3760 kB) pkmap : 0xff400000 - 0xff800000 (4096 kB) vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB) lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) .init : 0xc074e000 - 0xc0795000 ( 284 kB) .data : 0xc062ea6d - 0xc0746800 (1119 kB) .text : 0xc0400000 - 0xc062ea6d (2234 kB) Checking if this processor honours the WP bit even in supervisor mode...Ok. CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=12, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 5025.86 BogoMIPS (lpj=2512932) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 0(4) -> Core 0 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. Compat vDSO mapped to ffffe000. Checking 'hlt' instruction... OK. ACPI: Core revision 20070126 CPU0: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Booting processor 1/1 ip 4000 CPU 1 irqstacks, hard=c07b9000 soft=c0799000 Initializing CPU#1 Calibrating delay using timer specific routine.. 5022.85 BogoMIPS (lpj=2511426) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 1(4) -> Core 1 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#1. CPU1: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Booting processor 2/2 ip 4000 CPU 2 irqstacks, hard=c07ba000 soft=c079a000 Initializing CPU#2 Calibrating delay using timer specific routine.. 5022.85 BogoMIPS (lpj=2511426) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 2(4) -> Core 3 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#2. CPU2: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Booting processor 3/3 ip 4000 CPU 3 irqstacks, hard=c07bb000 soft=c079b000 Initializing CPU#3 Calibrating delay using timer specific routine.. 5022.84 BogoMIPS (lpj=2511421) CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 512K (64 bytes/line) CPU 3(4) -> Core 2 Intel machine check architecture supported. Intel machine check reporting enabled on CPU#3. CPU3: AMD Phenom(tm) 9850 Quad-Core Processor stepping 03 Total of 4 processors activated (20094.41 BogoMIPS). ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 Brought up 4 CPUs sizeof(vma)=84 bytes sizeof(page)=32 bytes sizeof(inode)=340 bytes sizeof(dentry)=132 bytes sizeof(ext3inode)=492 bytes sizeof(buffer_head)=56 bytes sizeof(skbuff)=176 bytes sizeof(task_struct)=3712 bytes CPU0 attaching sched-domain: domain 0: span 0000000f groups: 00000001 00000002 00000004 00000008 CPU1 attaching sched-domain: domain 0: span 0000000f groups: 00000002 00000004 00000008 00000001 CPU2 attaching sched-domain: domain 0: span 0000000f groups: 00000004 00000008 00000001 00000002 CPU3 attaching sched-domain: domain 0: span 0000000f groups: 00000008 00000001 00000002 00000004 net_namespace: 548 bytes Booting paravirtualized kernel on bare hardware Time: 23:37:58 Date: 04/20/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG for extended config space PCI: Using configuration type 1 Setting up standard PCI resources ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:14.4 ACPI: PCI Interrupt Routing Table [_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.P2P_._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCE2._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCE5._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCE7._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCE9._PRT] ACPI: PCI Interrupt Routing Table [_SB_.PCI0.PCEA._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered 00:0c: mem resource (0xe0000000-0xefffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling 00:0d: mem resource (0xffff0000-0xffffffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling 00:0d: mem resource (0xfec00000-0xfec00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling 00:0d: mem resource (0xfee00000-0xfee00fff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling 00:0d: mem resource (0xfff80000-0xfffeffff) overlaps 0000:00:00.0 BAR 3 (0xe0000000-0xffffffff), disabling pnp: PnP ACPI: found 14 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 3 of device 0000:00:00.0 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 hpet0: 4 32-bit timers, 14318180 Hz ACPI: RTC can wake from S4 Switched to high resolution mode on CPU 0 system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x220-0x225 has been reserved system 00:01: ioport range 0x290-0x294 has been reserved system 00:02: ioport range 0x4100-0x411f has been reserved system 00:02: ioport range 0x228-0x22f has been reserved system 00:02: ioport range 0x40b-0x40b has been reserved system 00:02: ioport range 0x4d6-0x4d6 has been reserved system 00:02: ioport range 0xc00-0xc01 has been reserved system 00:02: ioport range 0xc14-0xc14 has been reserved system 00:02: ioport range 0xc50-0xc52 has been reserved system 00:02: ioport range 0xc6c-0xc6d has been reserved system 00:02: ioport range 0xc6f-0xc6f has been reserved system 00:02: ioport range 0xcd0-0xcd1 has been reserved system 00:02: ioport range 0xcd2-0xcd3 has been reserved system 00:02: ioport range 0xcd4-0xcdf has been reserved system 00:02: ioport range 0x4000-0x40fe has been reserved system 00:02: ioport range 0x4210-0x4217 has been reserved system 00:02: ioport range 0xb00-0xb1f could not be reserved system 00:02: ioport range 0x238-0x23f has been reserved system 00:0d: iomem range 0xdf000-0xdffff has been reserved system 00:0d: iomem range 0xf0000-0xf7fff could not be reserved system 00:0d: iomem range 0xf8000-0xfbfff could not be reserved system 00:0d: iomem range 0xfc000-0xfffff could not be reserved system 00:0d: iomem range 0xcfee0000-0xcfefffff could not be reserved system 00:0d: iomem range 0x0-0x9ffff could not be reserved system 00:0d: iomem range 0x100000-0xcfedffff could not be reserved Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 PCI: Bridge: 0000:00:02.0 IO window: b000-bfff MEM window: 0xfa000000-0xfcffffff PREFETCH window: 0x00000000d0000000-0x00000000dfffffff PCI: Bridge: 0000:00:05.0 IO window: a000-afff MEM window: 0xfd700000-0xfd8fffff PREFETCH window: 0x00000000fdf00000-0x00000000fdffffff PCI: Bridge: 0000:00:07.0 IO window: e000-efff MEM window: 0xfde00000-0xfdefffff PREFETCH window: 0x00000000fdd00000-0x00000000fddfffff PCI: Bridge: 0000:00:09.0 IO window: d000-dfff MEM window: 0xfdc00000-0xfdcfffff PREFETCH window: 0x00000000fdb00000-0x00000000fdbfffff PCI: Bridge: 0000:00:0a.0 IO window: c000-cfff MEM window: 0xfda00000-0xfdafffff PREFETCH window: 0x00000000fd900000-0x00000000fd9fffff PCI: Bridge: 0000:00:14.4 IO window: 9000-9fff MEM window: 0xfd600000-0xfd6fffff PREFETCH window: 0x00000000fd500000-0x00000000fd5fffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0a.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 5, 131072 bytes) TCP established hash table entries: 131072 (order: 8, 1048576 bytes) TCP bind hash table entries: 65536 (order: 7, 524288 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 4404k freed apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: disabled - APM is not SMP safe. audit: initializing netlink socket (disabled) type=2000 audit(1208734677.659:1): initialized highmem bounce pool size: 64 pages Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:00.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] PCI: Setting latency timer of device 0000:00:09.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:09.0:pcie00] PCI: Setting latency timer of device 0000:00:0a.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0a.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:02 is registered as cooling_device2 ACPI: ACPI0007:03 is registered as cooling_device3 isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one month cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 Using IPI No-Shortcut mode registered taskstats version 1 Magic number: 4:512:656 Freeing unused kernel memory: 284k freed Write protecting the kernel read-only data: 908k SCSI subsystem initialized Driver 'sr' needs updating - please use bus_type methods loop: module loaded ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 16 (level, low) -> IRQ 16 ohci_hcd 0000:00:13.0: OHCI Host Controller ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000 libata version 3.00 loaded. usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: OHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd usb usb1: SerialNumber: 0000:00:13.0 ACPI: PCI Interrupt 0000:00:13.1[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.1: OHCI Host Controller ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 2 ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: OHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd usb usb2: SerialNumber: 0000:00:13.1 ACPI: PCI Interrupt 0000:00:13.2[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.2: OHCI Host Controller ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3 ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input2 usb 1-1: new full speed USB device using ohci_hcd and address 2 usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: OHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd usb usb3: SerialNumber: 0000:00:13.2 ACPI: PCI Interrupt 0000:00:13.3[B] -> GSI 17 (level, low) -> IRQ 17 ohci_hcd 0000:00:13.3: OHCI Host Controller ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 4 ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: OHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd usb usb4: SerialNumber: 0000:00:13.3 ACPI: PCI Interrupt 0000:00:13.4[C] -> GSI 18 (level, low) -> IRQ 18 ohci_hcd 0000:00:13.4: OHCI Host Controller ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 5 ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000 usb 1-1: configuration #1 chosen from 1 choice usb 1-1: New USB device found, idVendor=0930, idProduct=6540 usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 1-1: Product: USB Flash Memory usb 1-1: SerialNumber: 0B11FA6131E118DC usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: OHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ohci_hcd usb usb5: SerialNumber: 0000:00:13.4 sata_mv 0000:02:00.0: version 1.20 ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 17 (level, low) -> IRQ 17 sata_mv: Highpoint RocketRAID BIOS CORRUPTS DATA on all attached drives, regardless of if/how they are configured. BEWARE! sata_mv: For data safety, do not use sectors 8-9 on "Legacy" drives, and avoid the final two gigabytes on all RocketRAID BIOS initialized drives. sata_mv 0000:02:00.0: Applying 60X1C0 workarounds to unknown rev sata_mv 0000:02:00.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx PCI: Setting latency timer of device 0000:02:00.0 to 64 scsi0 : sata_mv scsi1 : sata_mv scsi2 : sata_mv scsi3 : sata_mv ata1: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd722000 irq 17 ata2: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd724000 irq 17 ata3: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd726000 irq 17 ata4: SATA max UDMA/133 mmio m1048576@0xfd700000 port 0xfd728000 irq 17 Initializing USB Mass Storage driver... scsi4 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata1.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133 ata1.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata2.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133 ata2.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata2.00: configured for UDMA/133 ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata3.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133 ata3.00: 488397168 sectors, multi 0: LBA48 NCQ (depth 31/32) ata3.00: configured for UDMA/133 ata4: SATA link down (SStatus 0 SControl 300) scsi 0:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 scsi 1:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 scsi 2:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 ACPI: PCI Interrupt 0000:06:0e.0[A] -> GSI 22 (level, low) -> IRQ 22 ACPI: PCI Interrupt 0000:00:13.5[D] -> GSI 19 (level, low) -> IRQ 19 ehci_hcd 0000:00:13.5: EHCI Host Controller ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 6 ehci_hcd 0000:00:13.5: debug port 1 ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000 usb 1-1: USB disconnect, address 2 Driver 'sd' needs updating - please use bus_type methods sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda:<6>ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 10 ports detected sda1 sd 0:0:0:0: [sda] Attached SCSI disk sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 1:0:0:0: [sdb] 488397168 512-byte hardware sectors (250059 MB) sd 1:0:0:0: [sdb] Write Protect is off sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdb: sdb1 sd 1:0:0:0: [sdb] Attached SCSI disk sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 2:0:0:0: [sdc] 488397168 512-byte hardware sectors (250059 MB) sd 2:0:0:0: [sdc] Write Protect is off sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdc: sdc1 sd 2:0:0:0: [sdc] Attached SCSI disk firewire_ohci: Added fw-ohci device 0000:06:0e.0, OHCI version 1.10 usb usb6: New USB device found, idVendor=1d6b, idProduct=0002 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: EHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25-0.234.rc9.git1.fc9.i686 ehci_hcd usb usb6: SerialNumber: 0000:00:13.5 ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI interrupt for device 0000:00:14.1 disabled PCI: Enabling device 0000:04:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.1 to 64 ACPI: PCI interrupt for device 0000:04:00.1 disabled PCI: Enabling device 0000:05:00.1 (0000 -> 0001) ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.1 to 64 ACPI: PCI interrupt for device 0000:05:00.1 disabled ahci 0000:00:12.0: version 3.0 ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 22 (level, low) -> IRQ 22 ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit ahci 0000:00:12.0: controller can't do PMP, turning off CAP_PMP usb 6-1: new high speed USB device using ehci_hcd and address 2 usb 6-1: configuration #1 chosen from 1 choice scsi5 : SCSI emulation for USB Mass Storage devices usb-storage: device found at 2 usb-storage: waiting for device to settle before scanning usb 6-1: New USB device found, idVendor=0930, idProduct=6540 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 6-1: Product: USB Flash Memory usb 6-1: SerialNumber: 0B11FA6131E118DC firewire_core: created device fw0: GUID 00ce110600001a4d, S400 ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode ahci 0000:00:12.0: flags: ncq sntf ilck pm led clo pio slum part scsi6 : ahci scsi7 : ahci scsi8 : ahci scsi9 : ahci ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22 ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22 ata7: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22 ata8: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22 ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata5.00: HPA detected: current 488395055, native 488397168 ata5.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133 ata5.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32) ata5.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: SB600 AHCI: limiting to 255 sectors per cmd ata5.00: configured for UDMA/133 ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata6.00: ATA-7: Hitachi HDT725050VLA360, V56OA7EA, max UDMA/133 ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32) ata6.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: SB600 AHCI: limiting to 255 sectors per cmd ata6.00: configured for UDMA/133 ata7: SATA link up 3.0 Gbps (SStatus 123 SControl 300) ata7.00: HPA detected: current 488395055, native 488397168 ata7.00: ATA-8: Hitachi HDP725025GLA380, GM2OA50E, max UDMA/133 ata7.00: 488395055 sectors, multi 16: LBA48 NCQ (depth 31/32) ata7.00: SB600 AHCI: limiting to 255 sectors per cmd ata7.00: SB600 AHCI: limiting to 255 sectors per cmd ata7.00: configured for UDMA/133 ata8: SATA link down (SStatus 0 SControl 300) scsi 6:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 sd 6:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 6:0:0:0: [sdd] 488395055 512-byte hardware sectors (250058 MB) sd 6:0:0:0: [sdd] Write Protect is off sd 6:0:0:0: [sdd] Mode Sense: 00 3a 00 00 sd 6:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdd: sdd1 sd 6:0:0:0: [sdd] Attached SCSI disk scsi 7:0:0:0: Direct-Access ATA Hitachi HDT72505 V56O PQ: 0 ANSI: 5 sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) sd 7:0:0:0: [sde] Write Protect is off sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 7:0:0:0: [sde] 976773168 512-byte hardware sectors (500108 MB) sd 7:0:0:0: [sde] Write Protect is off sd 7:0:0:0: [sde] Mode Sense: 00 3a 00 00 sd 7:0:0:0: [sde] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sde: sd 7:0:0:0: [sde] Attached SCSI disk scsi 8:0:0:0: Direct-Access ATA Hitachi HDP72502 GM2O PQ: 0 ANSI: 5 sd 8:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 8:0:0:0: [sdf] 488395055 512-byte hardware sectors (250058 MB) sd 8:0:0:0: [sdf] Write Protect is off sd 8:0:0:0: [sdf] Mode Sense: 00 3a 00 00 sd 8:0:0:0: [sdf] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdf: sdf1 sd 8:0:0:0: [sdf] Attached SCSI disk ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 17 ahci 0000:04:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:04:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:04:00.0 to 64 scsi10 : ahci scsi11 : ahci ata9: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe100 irq 17 ata10: SATA max UDMA/133 abar m8192@0xfdcfe000 port 0xfdcfe180 irq 17 ata9: SATA link down (SStatus 0 SControl 300) ata10: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> IRQ 18 ACPI: PCI Interrupt 0000:04:00.1[B] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:04:00.1 to 64 scsi12 : pata_jmicron scsi13 : pata_jmicron ata11: PATA max UDMA/100 cmd 0xdf00 ctl 0xde00 bmdma 0xdb00 irq 18 ata12: PATA max UDMA/100 cmd 0xdd00 ctl 0xdc00 bmdma 0xdb08 irq 18 usb-storage: device scan complete scsi 5:0:0:0: Direct-Access USB Flash Memory 6.50 PQ: 0 ANSI: 0 CCS scsi 5:0:0:1: CD-ROM USB Flash Memory 6.50 PQ: 0 ANSI: 0 sd 5:0:0:0: [sdg] 3894975 512-byte hardware sectors (1994 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 08 sd 5:0:0:0: [sdg] Assuming drive cache: write through sd 5:0:0:0: [sdg] 3894975 512-byte hardware sectors (1994 MB) sd 5:0:0:0: [sdg] Write Protect is off sd 5:0:0:0: [sdg] Mode Sense: 45 00 00 08 sd 5:0:0:0: [sdg] Assuming drive cache: write through sdg: sdg1 sd 5:0:0:0: [sdg] Attached SCSI removable disk sr0: scsi3-mmc drive: 8x/40x writer xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 5:0:0:1: Attached scsi CD-ROM sr0 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33664 Buffer I/O error on device sr0, logical block 8416 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33668 Buffer I/O error on device sr0, logical block 8417 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33664 Buffer I/O error on device sr0, logical block 8416 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33668 Buffer I/O error on device sr0, logical block 8417 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33832 Buffer I/O error on device sr0, logical block 8458 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33836 Buffer I/O error on device sr0, logical block 8459 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33832 Buffer I/O error on device sr0, logical block 8458 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33836 Buffer I/O error on device sr0, logical block 8459 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 Buffer I/O error on device sr0, logical block 8462 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 Buffer I/O error on device sr0, logical block 8462 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33784 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33788 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33840 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33844 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part PCI: Setting latency timer of device 0000:05:00.0 to 64 scsi14 : ahci scsi15 : ahci ata13: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe100 irq 18 ata14: SATA max UDMA/133 abar m8192@0xfdafe000 port 0xfdafe180 irq 18 ata13: SATA link down (SStatus 0 SControl 300) ata14: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata14.00: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133 ata14.00: 321672960 sectors, multi 0: LBA48 ata14.00: applying bridge limits ata14.00: configured for UDMA/100 scsi 15:0:0:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5 sd 15:0:0:0: [sdh] 321672960 512-byte hardware sectors (164697 MB) sd 15:0:0:0: [sdh] Write Protect is off sd 15:0:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 15:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 15:0:0:0: [sdh] 321672960 512-byte hardware sectors (164697 MB) sd 15:0:0:0: [sdh] Write Protect is off sd 15:0:0:0: [sdh] Mode Sense: 00 3a 00 00 sd 15:0:0:0: [sdh] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdh: sdh1 sdh2 sdh3 sd 15:0:0:0: [sdh] Attached SCSI disk ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low) -> IRQ 16 ACPI: PCI Interrupt 0000:05:00.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:05:00.1 to 64 scsi16 : pata_atiixp scsi17 : pata_jmicron scsi18 : pata_atiixp ata15: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14 ata16: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15 scsi19 : pata_jmicron ata17: PATA max UDMA/100 cmd 0xcf00 ctl 0xce00 bmdma 0xcb00 irq 19 ata18: PATA max UDMA/100 cmd 0xcd00 ctl 0xcc00 bmdma 0xcb08 irq 19 ata15.00: ATAPI: LITE-ON DVDRW LH-20A1H, LL07, max UDMA/66 ata15.01: HPA detected: current 321670847, native 321672960 ata15.01: ATA-7: HDT722516DLAT80, V43OA96A, max UDMA/133 ata15.01: 321670847 sectors, multi 16: LBA48 ata15.00: limited to UDMA/33 due to 40-wire cable ata15.00: configured for UDMA/33 ata15.01: configured for UDMA/100 scsi 16:0:0:0: CD-ROM LITE-ON DVDRW LH-20A1H LL07 PQ: 0 ANSI: 5 sr1: scsi3-mmc drive: 24x/48x writer dvd-ram cd/rw xa/form2 cdda tray sr 16:0:0:0: Attached scsi CD-ROM sr1 scsi 16:0:1:0: Direct-Access ATA HDT722516DLAT80 V43O PQ: 0 ANSI: 5 sd 16:0:1:0: [sdi] 321670847 512-byte hardware sectors (164695 MB) sd 16:0:1:0: [sdi] Write Protect is off sd 16:0:1:0: [sdi] Mode Sense: 00 3a 00 00 sd 16:0:1:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sd 16:0:1:0: [sdi] 321670847 512-byte hardware sectors (164695 MB) sd 16:0:1:0: [sdi] Write Protect is off sd 16:0:1:0: [sdi] Mode Sense: 00 3a 00 00 sd 16:0:1:0: [sdi] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sdi: sdi1 sdi2 sdi3 sd 16:0:1:0: [sdi] Attached SCSI disk ISO 9660 Extensions: Microsoft Joliet Level 3 Unable to load NLS charset utf8 Unable to load NLS charset utf8 ISO 9660 Extensions: RRIP_1991A squashfs: version 3.3 (2007/10/31) Phillip Lougher device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com kjournald starting. Commit interval 5 seconds EXT3 FS on dm-0, internal journal EXT3-fs: mounted filesystem with ordered data mode. printk: 11 messages suppressed. type=1404 audit(1208734698.516:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 SELinux:8192 avtab hash slots allocated. Num of rules:172102 SELinux:8192 avtab hash slots allocated. Num of rules:172102 security: 8 users, 12 roles, 2300 types, 115 bools, 1 sens, 1024 cats security: 72 classes, 172102 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr inode_doinit_with_dentry: no dentry for dev=dm-0 ino=11905 inode_doinit_with_dentry: no dentry for dev=dm-0 ino=10972 inode_doinit_with_dentry: no dentry for dev=dm-0 ino=10971 SELinux: initialized (dev loop2, type squashfs), not configured for labeling SELinux: initialized (dev loop0, type squashfs), not configured for labeling SELinux: initialized (dev sr1, type iso9660), uses genfs_contexts SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts SELinux: policy loaded with handle_unknown=allow type=1403 audit(1208734699.380:3): policy loaded auid=4294967295 ses=4294967295 sd 0:0:0:0: Attached scsi generic sg0 type 0 sd 1:0:0:0: Attached scsi generic sg1 type 0 sd 2:0:0:0: Attached scsi generic sg2 type 0 sd 6:0:0:0: Attached scsi generic sg3 type 0 sd 7:0:0:0: Attached scsi generic sg4 type 0 sd 8:0:0:0: Attached scsi generic sg5 type 0 sd 5:0:0:0: Attached scsi generic sg6 type 0 sr 5:0:0:1: Attached scsi generic sg7 type 5 sd 15:0:0:0: Attached scsi generic sg8 type 0 sr 16:0:0:0: Attached scsi generic sg9 type 5 sd 16:0:1:0: Attached scsi generic sg10 type 0 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4 ACPI: Power Button (CM) [PWRB] sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33664 Buffer I/O error on device sr0, logical block 8416 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33668 Buffer I/O error on device sr0, logical block 8417 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33664 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33668 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33832 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33836 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33832 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33836 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33784 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33788 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33840 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33844 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 sr 5:0:0:1: [sr0] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE,SUGGEST_OK sr 5:0:0:1: [sr0] Sense Key : No Sense [current] sr 5:0:0:1: [sr0] Add. Sense: No additional sense information end_request: I/O error, dev sr0, sector 33848 r8169 Gigabit Ethernet driver 2.2LK-NAPI loaded ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:03:00.0 to 64 eth0: RTL8168b/8111b at 0xf8be2000, 00:1a:4d:5e:f6:36, XID 38000000 IRQ 218 ACPI: WMI: Mapper loaded piix4_smbus 0000:00:14.0: Found 0000:00:14.0 device input: PC Speaker as /devices/platform/pcspkr/input/input5 parport_pc 00:09: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] ppdev: user-space parallel port driver ACPI: PCI Interrupt 0000:00:14.2[A] -> GSI 16 (level, low) -> IRQ 16 ALSA sound/pci/hda/hda_intel.c:1810: chipset global capabilities = 0x4401 ALSA sound/pci/hda/hda_intel.c:749: codec_mask = 0x8 hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... ALSA sound/pci/hda/hda_codec.c:2857: autoconfig: line_outs=4 (0x14/0x15/0x16/0x17/0x0) ALSA sound/pci/hda/hda_codec.c:2861: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2865: hp_outs=1 (0x1b/0x0/0x0/0x0/0x0) ALSA sound/pci/hda/hda_codec.c:2866: mono: mono_out=0x0 ALSA sound/pci/hda/hda_codec.c:2874: inputs: mic=0x18, fmic=0x19, line=0x1a, fline=0x0, cd=0x0, aux=0x0 ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Headphone Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Line-Out Playback Volume, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Speaker Playback Switch, skipped ALSA sound/pci/hda/hda_codec.c:1073: Cannot find slave Mono Playback Switch, skipped SELinux: initialized (dev ramfs, type ramfs), uses genfs_contexts NET: Registered protocol family 10 lo: Disabled Privacy Extensions device-mapper: multipath: version 1.0.5 loaded EXT3 FS on dm-0, internal journal SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts powernow-k8: Found 1 AMD Phenom(tm) 9850 Quad-Core Processor processors (4 cpu cores) (version 2.20.00) powernow-k8: 0 : pstate 0 (2500 MHz) powernow-k8: 1 : pstate 1 (1250 MHz) ip6_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ip_tables: (C) 2000-2006 Netfilter Core Team RPC: Registered udp transport module. RPC: Registered tcp transport module. SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts fuse init (API version 7.9) SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.9 Bluetooth: L2CAP socket layer initialized Bluetooth: RFCOMM socket layer initialized Bluetooth: RFCOMM TTY layer initialized Bluetooth: RFCOMM ver 1.8 Bluetooth: BNEP (Ethernet Emulation) ver 1.2 Bluetooth: BNEP filters: protocol multicast Bridge firewalling registered pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature. r8169: eth0: link up r8169: eth0: link up hda-intel: Invalid position buffer, using LPIB read method instead. eth0: no IPv6 routers present SELinux: initialized (dev fuse, type fuse), uses genfs_contexts SELinux: initialized (dev sdg1, type vfat), uses genfs_contexts ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sr0, type iso9660), uses genfs_contexts atkbd.c: Unknown key released (translated set 2, code 0xe0 on isa0060/serio0). atkbd.c: Use 'setkeycodes e060 <keycode>' to make it known.
One other thing that I noticed was that fuse was started very late in the bootup. I have fuse filesystems that I would like to mount with fstab but I can't because fuse isn't there yet. Is it possible for Fedora to load fuse into the kernel much earlier?
Gerry
The good part, I was able to run the installer inside the Live CD and get a system to the hard disks. The bad news, the system does not boot from the hard drive. When I chose either of the RAID-1 disk members in the BIOS as the boot disk, the system does not boot. Right at the point where it should start the boot it just hangs. On the mirror disk it just says GRUB.
Gerry
Gerry Reno wrote:
Since I wasn't able to get F9 Preview or Beta installed, I d/l F9 Preview Live CD and booted it. It almost did not boot. I was getting all kinds of weird block device errors and a lot of trouble reading the cd with errors on /dev/sr0 like (and I verified the media - it was good):
Buffer I/O error on device sr0, logical block 0462 end_request, I/O error, dev sr0, sector 33840 Unable to find persistent overlay; using temporary Red Hat Nash version 6.0.47 starting Setting up new root fs no fstab.sys, mounting internal defaults unmounting old /dev unmounting old [bunch of icon chars like hearts and things] unmounting old /sys Welcome to Fedora
Once it finally did boot I went in and sent a smolt profile of my machine. It is here: http://www.smolts.org/client/show/pub_a85342c8-29ef-4208-a216-161ee87bcb2f
With all the weird errors I've seen I think that F9 is having some difficulty with the SATA/IDE controllers/drives. This machine has three SATA controllers: Gigabyte 2 int 2 ext AMD660 4 int HighPoint 2300 4 int
I see such errors on every Fedora LiveCD I've ever built (even on my non-standard embedded boards). They are only related to the CD device itself and don't seem to hurt anything (except one's sensibilities)
Gerry Reno greno@verizon.net writes:
Since I wasn't able to get F9 Preview or Beta installed, I d/l F9 Preview Live CD and booted it. It almost did not boot. I was getting all kinds of weird block device errors and a lot of trouble reading the cd with errors on /dev/sr0 like (and I verified the media - it was good):
Buffer I/O error on device sr0, logical block 0462 end_request, I/O error, dev sr0, sector 33840
Did you run the media check on the disk?
-Jeff