Using serial port. The Hieroglyphics regularly occur on output.
What serial rate and terminal program do you use? I see it
occasionally but find screen is usually pretty decent "screen
/dev/ttyUSB0 115200"
No network available had to create ifcfg-eth0 and ifup eth0 to start
network. Note not using IPV6 on router.
We've seen that randomly but it's intermittently and still being investigated.
Did not resize partition!
Known issue, we've seen an intermittent issue with finding rootfs that
is believed could be to do with the growing of the partition so we've
disabled it for the moment to see if we can get some data either way.
https://bugzilla.redhat.com/show_bug.cgi?id=1109603
First IP address given by router running openwrt and dnsmasq version
2.62.
root@router:~# cat /var/dhcp.leases
1406708192 f6:6b:6e:a3:63:57 192.168.53.53 ct1
ff:6e:a3:63:57:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57
After reboot
root@router:~# cat /var/dhcp.leases
1406710000 be:bd:3e:5e:af:bd 192.168.53.59 ct1
ff:3e:5e:af:bd:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57
1406708192 f6:6b:6e:a3:63:57 192.168.53.53 *
ff:6e:a3:63:57:00:01:00:01:c7:92:be:b9:f6:6b:6e:a3:63:57
[root@ct1 ~]# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode
DEFAULT group default
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state
UP mode DEFAULT group default qlen 1000
link/ether be:bd:3e:5e:af:bd brd ff:ff:ff:ff:ff:ff
I'm not sure the CT has a fixed MAC address or serial number in which
to derive one
https://lists.fedoraproject.org/pipermail/arm/2013-December/007218.html
Attached dmesg.txt.
Any assistance would be welcome.
On another cubietruck I performed
yum update - this showed no updates available, even though the mirrors
were showing updates.
Not sure on that one.
contents of /boot/extlinux/extlinux.conf
label Fedora (3.16.0-0.rc5.git0.1.fc22.armv7hl) 22 (Rawhide)
kernel /vmlinuz-3.16.0-0.rc5.git0.1.fc22.armv7hl
append ro root=UUID=47984fd6-5fcb-4547-94be-3fa261beaa75
console=ttyS0,115200 console=tty0 LANG=en_US.UTF-8
fdtdir /dtb-3.16.0-0.rc4.git3.1.fc22.armv7hl/
initrd /initramfs-3.16.0-0.rc5.git0.1.fc22.armv7hl.img
Note the fdtdir should be fdtdir /dtb-3.16.0-0.rc6.git0.1.fc22.1.armv7hl
That's a known blocker bug
https://bugzilla.redhat.com/show_bug.cgi?id=1088933
Peter