Fedora 40 Minimal
by Timothy Krantz
I tried using the arm-image-installer to create a bootable sd card for my
rockpro 64 using the fedora 40 minimal image 40-1.14.
It completed ok but did not boot, dumped me into a uboot environment. When
I put the card in a different machine to look at the partitions the first
one would not mount with an error of "doesn't seem to have a valid NTFS". So
I created an valid file system with mkdosfs, mounted it and copied the
appropriate efi files to it.
Tried to boot again and got absolutely nothing. As if the uboot was not
there. So I put the car back into the other machine and did a update-uboot
with the proper uboot file.
Tried to boot and got the same thing as the original attempt to boot. Put
the card back into the other machine and the first partition would not mount
again same issue with not a valid NTFS.
It seems to me that the writing the uboot is stepping on the first
partition.
I tried the workstation image and it did not have this problem.
Does it make any sense that when the arm-image-installer writes the uboot
for the rockpro64 that it could be stepping on the first partition that it
has previously written?
Tim Krantz
1 day
Re: Image/Support for FriendlyARM NanoPi R4S
by Nayla Nikolic
On 14.06.2024 07:52, Peter Boy wrote:
> That page refers to Fedora F25 and was last edited April 5, 2017
>
> If you install arm-image-installer und uboot-images-armv8-2024.04-1.fc40.noarch you can check for supported boards by
>
> $ arm-image-installer —-supported
>
> There you find support for a nanopi-r4s-rk3399
Thank you very much
Does arm-image-installer also work on Ubuntu and/or Debian
(https://pagure.io/arm-image-installer)? I can't find a *.deb.
Happy day
Nayla
5 days, 20 hours
Questions to Fedora on Rock 5B
by Andreas Reschke
Hello
1. Audio
on this side
https://gitlab.collabora.com/hardware-enablement/rockchip-3588/notes-for-...
is shows Headphone Jack Playback is enable with 6.4-rc1
What does this mean?
I didn't found any soundcard on my device
root@rockpi5:~# inxi -A
Audio:
Message: No device data found.
API: ALSA v: k6.10.0-0.rc2.20240607git8a92980606e3.28.fc41.aarch64
status: kernel-api
Server-1: PipeWire v: 1.1.82 status: active
root@rockpi5:~#
2. GPU
I know the GPU isn't complete at the moment, how to load the kernel
driver panthor at boot time ?
Greetings
Andreas
1 week, 1 day
Fedora on Rock 5B
by Andreas Reschke
Hi there,
I've tried to install Fedora on my Rock 5 without success.
Booting with
https://github.com/edk2-porting/edk2-rk3588/releases/download/v0.7.1/rock...
on SD-Card and source from
https://dl.fedoraproject.org/pub/fedora/linux/development/rawhide/Everyth....
Board boots up fine but later starting in loop with
350.456154] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors end ###############
[ 352.156835] dracut-initqueue[1065]: Warning: dracut-initqueue:
timeout, still waiting for following initqueue hooks:
[ 352.161387] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/devexists-\x2fdev\x2froot.sh: "[ -e
"/dev/root" ]"
[ 352.164564] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_disks.sh: "[ "$main_loop"
-ge "10" ]"
[ 352.167716] dracut-initqueue[1065]: Warning:
/lib/dracut/hooks/initqueue/finished/wait_for_settle.sh: "[ -f
/tmp/settle.done ]"
[ 352.171999] dracut-initqueue[1065]: Warning: dracut-initqueue:
starting timeout scripts
[ 352.172610] dracut-initqueue[1065]: Warning: ############# Anaconda
installer errors begin #############
[ 352.172852] dracut-initqueue[1065]: Warning: #
#
[ 352.173097] dracut-initqueue[1065]: Warning: It seems that the boot
has failed. Possible causes include
[ 352.173296] dracut-initqueue[1065]: Warning: missing inst.stage2 or
inst.repo boot parameters on the
[ 352.173537] dracut-initqueue[1065]: Warning: kernel cmdline. Please
verify that you have specified
[ 352.173731] dracut-initqueue[1065]: Warning: inst.stage2 or inst.repo.
[ 352.173918] dracut-initqueue[1065]: Warning: Please also note that
the 'inst.' prefix is now mandatory.
[ 352.174156] dracut-initqueue[1065]: Warning: #
#
[ 352.174354] dracut-initqueue[1065]: Warning: #### Installer
errors encountered during boot: ####
[ 352.174543] dracut-initqueue[1065]: Warning: #
#
[ 352.174775] dracut-initqueue[1065]: Warning: Reason unknown
[ 352.174970] dracut-initqueue[1065]: Warning: #
#
Full log file: see rock.txt
Has anybody more succcess ?
Greetings
Andreas
1 week, 1 day
GPU accelerated with panthor on ROCK 5 Model B
by Andreas Reschke
Hi there,
today the first Kernel 6.10 with panthor was released. How to enable the
driver?
modprobe panthor
root@rockpi5:~# lsmod | grep panthor
panthor 163840 0
drm_gpuvm 36864 1 panthor
drm_exec 12288 2 drm_gpuvm,panthor
gpu_sched 61440 1 panthor
root@rockpi5:~#
root@rockpi5:~# inxi -G
Graphics:
Message:No PCI device data found.
Display:unspecified server:X.Org v:24.1 with:Xwayland v:24.1.0
driver:X:loaded:modesetting dri:swrast gpu:N/A
resolution:1920x1080~60Hz
API:EGL v:1.5 drivers:kms_swrast,swrast
platforms:gbm,x11,surfaceless,device
API:OpenGL v:4.5 vendor:mesa v:24.1.0 renderer:llvmpipe (LLVM 18.1.6
128 bits)
API:Vulkan v:1.3.283 drivers:N/A surfaces:xcb,xlib
root@rockpi5:~#
Greetings
Andreas
2 weeks, 1 day