I tried both 'tiacx111.bin' and TIACX111.BIN in /lib/firmware. Neither
works.
From: John Summerfied <debian(a)herakles.homelinux.org>
Reply-To: For testers of Fedora Core development releases
<fedora-test-list(a)redhat.com>
To: For testers of Fedora Core development releases
<fedora-test-list(a)redhat.com>
Subject: Re: ACX100 -acx.ko module for TI ACX111 chipsets
Date: Mon, 12 Dec 2005 12:04:43 +0800
Don Springall wrote:
>I am trying to get the acx module to work for my linksys WPC54G v2
>wireless card working. The module is currently in the MM tree only. It
>cannot seem to find the firmware. I stuck the firmware in as
>/lib/firmware/TIACX111.BIN but I still get this in dmesg:
>
>acx: found ACX111-based wireless network card at 0000:07:00.0, irq:10,
>phymem1:0x28020000, phymem2:0x28000000, mem1:0xd087c000, mem1_size:8192,
>mem2:0xd0940000, mem2_size:131072
>initial debug setting is 0x000A
>using IRQ 10
>requesting firmware image 'tiacx111c16'
>acx: firmware image 'tiacx111c16' was not provided. Check your hotplug
>scripts
>requesting firmware image 'tiacx111'
>acx: firmware image 'tiacx111' was not provided. Check your hotplug
>scripts
>acx: reset_dev() FAILED
>ACPI: PCI interrupt for device 0000:07:00.0 disabled
>acx_pci: probe of 0000:07:00.0 failed with error -5
>
>ndiswrapper uses the firmware from linksys which is
>/lib/firmware/FwRad17.bin and /lib/firmware/FwRad16.bin
>Does anyone have any experience getting this to work ?
>
>
case matters. Try renameing the file to 'tiacx111' or 'tiacx111.bin'
--
Cheers
John