--- On Tue, 3/3/09, Adam Williamson <awilliam(a)redhat.com> wrote:
From: Adam Williamson <awilliam(a)redhat.com>
Subject: Re: No more X on nv card: nVidia Corporation NV34 [GeForce FX 5200]
To: olivares14031(a)yahoo.com
Cc: "For testers of Fedora Core development releases"
<fedora-test-list(a)redhat.com>
Date: Tuesday, March 3, 2009, 6:24 PM
On Tue, 2009-03-03 at 17:51 -0800, Antonio Olivares wrote:
> Thank you Adam for your post, I believe it is the
kernel that does not allow the booting :(, booting to an
older kernel, X works :)
>
> [olivares@localhost ~]$ uname -r
> 2.6.29-0.159.rc6.git3.fc11.i586
Yep, good catch by Johann, I'd forgotten about that
one. I believe it's
a known issue, it's been reported, so it should get
fixed in a future
kernel.
--
Booted to 197 kernel no X :(, tried to revert back to 159 kernel and no X :(, mouse
pointer stands there and does nothing X never comes in. Tried to create Xorg.conf file,
but it fails :(, I will wait patiently a newer kernel that works here :)
ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
------------[ cut here ]------------
WARNING: at lib/dma-debug.c:461 check_unmap+0xf6/0x3d8() (Not tainted)
Hardware name: System product name
forcedeth 0000:00:04.0: DMA-API: device driver tries to free DMA memory it has not
allocated [device address=0x000000002bbce242] [size=90 bytes]
Modules linked in: nf_conntrack_netbios_ns iptable_nat nf_nat ip6t_REJECT ip6table_filter
ip6_tables ipv6 uinput snd_intel8x0 snd_ac97_codec ac97_bus pcspkr snd_seq_dummy
snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss snd_pcm
3c59x mii snd_timer snd i2c_nforce2 soundcore snd_page_alloc forcedeth usblp pata_ali
sata_vsc sata_svw sata_via pata_pcmcia sata_nv ata_generic pata_acpi pata_amd nouveau drm
i2c_core [last unloaded: scsi_wait_scan]
Pid: 0, comm: swapper Not tainted 2.6.29-0.197.rc7.fc11.i586 #1
Call Trace:
[<c042fe33>] warn_slowpath+0x7c/0xa7
[<c044e433>] ? find_usage_backwards+0xc8/0xea
[<c044e433>] ? find_usage_backwards+0xc8/0xea
[<c04500ad>] ? check_usage+0x29/0x20a
[<c044f746>] ? mark_lock+0x1e/0x30b
[<c054a400>] ? check_for_stack+0x55/0x7d
[<c054a44e>] ? get_hash_bucket+0x26/0x2f
[<c054abb2>] check_unmap+0xf6/0x3d8
[<c0430343>] ? release_console_sem+0x1a9/0x1d6
[<c044f746>] ? mark_lock+0x1e/0x30b
[<c054b001>] debug_dma_unmap_page+0x5b/0x63
[<c054b001>] ? debug_dma_unmap_page+0x5b/0x63
[<f20253ed>] T.908+0x34/0x3f [forcedeth]
[<f2025433>] nv_tx_done+0x3b/0x187 [forcedeth]
[<f2025623>] nv_nic_irq+0xa4/0x238 [forcedeth]
[<c0471177>] handle_IRQ_event+0x22/0x58
[<c0472598>] handle_fasteoi_irq+0x80/0xb7
[<c0472518>] ? handle_fasteoi_irq+0x0/0xb7
<IRQ> [<c04045ac>] ? common_interrupt+0x2c/0x40
[<c044fc82>] ? trace_hardirqs_on+0xb/0xd
[<c041b94c>] ? native_safe_halt+0xa/0xc
[<c0409703>] ? default_idle+0x4f/0x89
[<c044ef2d>] ? trace_hardirqs_off+0xb/0xd
[<c0403010>] ? cpu_idle+0x72/0x92
[<c06dfde0>] ? rest_init+0x58/0x5a
---[ end trace 1236e4b9bc601b91 ]---
eth0: no IPv6 routers present
eth1: setting half-duplex.
ADDRCONF(NETDEV_UP): eth1: link is not ready
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
Bluetooth: Core ver 2.15
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP ver 2.13
Bluetooth: L2CAP socket layer initialized
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bridge firewalling registered
Bluetooth: SCO (Voice Link) ver 0.6
Bluetooth: SCO socket layer initialized
[olivares@localhost ~]$ su -
Password:
[root@localhost ~]# Xorg -configure
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP
Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009 08:22:04PM
Build ID: xorg-x11-server 1.6.0-5.fc11
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 4 19:48:22 2009
List of video drivers:
cyrix
tdfx
v4l
siliconmotion
glint
openchrome
i740
amd
sis
dummy
ati
sisusb
r128
ast
avivo
i128
mach64
s3virge
trident
savage
nsc
s3
intel
chips
rendition
radeon
neomagic
nv
tseng
ark
mga
vmware
i810
apm
voodoo
vga
cirrus
ztv
geode
nouveau
fbdev
vesa
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "cyrix" (module requirement mismatch, 0)
(EE) module ABI major version (4) doesn't match the server's version (5)
(EE) Failed to load module "nsc" (module requirement mismatch, 0)
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "vga" (module requirement mismatch, 0)
(++) Using config file: "/root/xorg.conf.new"
Number of created screens does not match number of detected devices.
Configuration failed.
[root@localhost ~]# ls
anaconda-ks.cfg nodep
com2connect2net on
connect Pictures
descriptions of scripts plugin_stack.trace
Desktop Public
Documents removexine-1.txt
Download rmdup
dup scripts.tar.bz2
file_t-1.txt scsconfig.log
install.log scsrun.log
install.log.syslog soundglitch1.txt
livecd Templates
mancon troubleshoot.txt
mbox up2date
Music Videos
myiptables.pp xorg.conf.new
myiptables.te xorg-x11-drv-nv-2.1.6-3.fc9.i386.rpm
[root@localhost ~]# X test xorg.conf.new
Unrecognized option: test
use: X [:<display>] [option]
-a # mouse acceleration (pixels)
-ac disable access control restrictions
-audit int set audit trail level
-auth file select authorization file
-br create root window with black background
+bs enable any backing store support
-bs disable any backing store support
-c turns off key-click
c # key-click volume (0-100)
-cc int default color visual class
-core generate core dump on fatal error
-dpi int screen resolution in dots per inch
dpms enables VESA DPMS monitor control
-dpms disables VESA DPMS monitor control
-deferglyphs [none|all|16] defer loading of [no|all|16-bit] glyphs
-f # bell base (0-100)
-fc string cursor font
-fn string default font name
-fp string default font path
-help prints message with these options
-I ignore all remaining arguments
-ld int limit data space to N Kb
-lf int limit number of open files to N
-ls int limit stack space to N Kb
-logo enable logo in screen saver
nologo disable logo in screen saver
-nolisten string don't listen on protocol
-noreset don't reset after last client exists
-nr create root window with no background
-reset reset after last client exists
-p # screen-saver pattern duration (minutes)
-pn accept failure to listen on all ports
-nopn reject failure to listen on all ports
-r turns off auto-repeat
r turns on auto-repeat
-render [default|mono|gray|color] set render color alloc policy
-retro start with classic stipple and cursor
-s # screen-saver timeout (minutes)
-t # mouse threshold (pixels)
-terminate terminate at server reset
-to # connection time out
-tst disable testing extensions
ttyxx server started from init on /dev/ttyxx
v video blanking for screen-saver
-v screen-saver without video blanking
-wm WhenMapped default backing-store
-wr create root window with white background
-x string loads named extension at init time
-maxbigreqsize set maximal bigrequest size
+xinerama Enable XINERAMA extension
-xinerama Disable XINERAMA extension
-dumbSched Disable smart scheduling, enable old behavior
-schedInterval int Set scheduler interval in msec
+extension name Enable extension
-extension name Disable extension
-query host-name contact named host for XDMCP
-broadcast broadcast for XDMCP
-multicast [addr [hops]] IPv6 multicast for XDMCP
-indirect host-name contact named host for indirect XDMCP
-port port-num UDP port number to send messages to
-from local-address specify the local address to connect from
-once Terminate server after one session
-class display-class specify display class to send in manage
-cookie xdm-auth-bits specify the magic cookie for XDMCP
-displayID display-id manufacturer display ID for request
-kb disable the X Keyboard Extension
+kb enable the X Keyboard Extension
[+-]accessx [ timeout [ timeout_mask [ feedback [ options_mask] ] ] ]
enable/disable accessx key sequences
-ardelay set XKB autorepeat delay
-arinterval set XKB autorepeat interval
Device Dependent Usage
-modulepath paths specify the module search path
-logfile file specify a log file name
-configure probe for devices and write an xorg.conf
-showopts print available options for all installed drivers
-modalias output a modalias-style filter for each driver installed
-config file specify a configuration file, relative to the
xorg.conf search path, only root can use absolute
-probeonly probe for devices, then exit
-verbose [n] verbose startup messages
-logverbose [n] verbose log messages
-quiet minimal startup messages
-pixmap24 use 24bpp pixmaps for depth 24
-pixmap32 use 32bpp pixmaps for depth 24
-fbbpp n set bpp for the framebuffer. Default: 8
-depth n set colour depth. Default: 8
-gamma f set gamma value (0.1 < f < 10.0) Default: 1.0
-rgamma f set gamma value for red phase
-ggamma f set gamma value for green phase
-bgamma f set gamma value for blue phase
-weight nnn set RGB weighting at 16 bpp. Default: 565
-layout name specify the ServerLayout section name
-screen name specify the Screen section name
-keyboard name specify the core keyboard InputDevice name
-pointer name specify the core pointer InputDevice name
-nosilk disable Silken Mouse
-flipPixels swap default black/white Pixel values
-disableVidMode disable mode adjustments with xvidtune
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
Screen 1 "Screen1" RightOf "Screen0"
Screen 2 "Screen2" RightOf "Screen1"
Screen 3 "Screen3" RightOf "Screen2"
Screen 4 "Screen4" RightOf "Screen3"
Screen 5 "Screen5" RightOf "Screen4"
Screen 6 "Screen6" RightOf "Screen5"
Screen 7 "Screen7" RightOf "Screen6"
Screen 8 "Screen8" RightOf "Screen7"
Screen 9 "Screen9" RightOf "Screen8"
Screen 10 "Screen10" RightOf "Screen9"
Screen 11 "Screen11" RightOf "Screen10"
Screen 12 "Screen12" RightOf "Screen11"
Screen 13 "Screen13" RightOf "Screen12"
Screen 14 "Screen14" RightOf "Screen13"
Screen 15 "Screen15" RightOf "Screen14"
Screen 16 "Screen16" RightOf "Screen15"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "catalogue:/etc/X11/fontpath.d"
FontPath "built-ins"
EndSection
Section "Module"
Load "vnc"
Load "dbe"
Load "dri2"
Load "glx"
Load "record"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor2"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor3"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor4"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor5"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor6"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor7"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor8"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor9"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor10"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor11"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor12"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor13"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor14"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor15"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor16"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "NV34 [GeForce FX 5200]"
BusID "PCI:2:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card1"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 IGP2"
BusID "PCI:0:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card2"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Memory Controller 1"
BusID "PCI:0:0:1"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card3"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Memory Controller 4"
BusID "PCI:0:0:2"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card4"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Memory Controller 3"
BusID "PCI:0:0:3"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card5"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Memory Controller 2"
BusID "PCI:0:0:4"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card6"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Memory Controller 5"
BusID "PCI:0:0:5"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card7"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 ISA Bridge"
BusID "PCI:0:1:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card8"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 SMBus (MCP)"
BusID "PCI:0:1:1"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card9"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 USB Controller"
BusID "PCI:0:2:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card10"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 USB Controller"
BusID "PCI:0:2:1"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card11"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 USB Controller"
BusID "PCI:0:2:2"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>:
"True"/"False",
### <string>: "String", <freq>: "<f>
Hz/kHz/MHz"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card12"
Driver "nv"
VendorName "nVidia Corporation"
BoardName "nForce2 Ethernet Controller"
You have mail in /var/spool/mail/root
[root@localhost ~]# Xorg -configure
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP
Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009 08:22:04PM
Build ID: xorg-x11-server 1.6.0-5.fc11
Before reporting problems, check
http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Mar 4 19:49:41 2009
List of video drivers:
cyrix
tdfx
v4l
siliconmotion
glint
openchrome
i740
amd
sis
dummy
ati
sisusb
r128
ast
avivo
i128
mach64
s3virge
trident
savage
nsc
s3
intel
chips
rendition
radeon
neomagic
nv
tseng
ark
mga
vmware
i810
apm
voodoo
vga
cirrus
ztv
geode
nouveau
fbdev
vesa
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "cyrix" (module requirement mismatch, 0)
(EE) module ABI major version (4) doesn't match the server's version (5)
(EE) Failed to load module "nsc" (module requirement mismatch, 0)
(EE) module ABI major version (1) doesn't match the server's version (5)
(EE) Failed to load module "vga" (module requirement mismatch, 0)
(++) Using config file: "/root/xorg.conf.new"
Number of created screens does not match number of detected devices.
Configuration failed.
[root@localhost ~]# startx
xauth: creating new authority file /root/.serverauth.2882
X.Org X Server 1.6.0
Release Date: 2009-2-25
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.18-128.1.1.el5 i686
Current Operating System: Linux localhost.localdomain 2.6.29-0.197.rc7.fc11.i586 #1 SMP
Tue Mar 3 23:01:11 EST 2009 i686
Build Date: 03 March 2009 08:22:04PM
Used Slax Live CD to send this, since Fedora rawhide boots but no X :(
Regards,
Antonio