Le lun 29/03/2004 à 23:58, Joel Young a écrit :
From: Jean Francois Martinez <jfm512(a)free.fr>
> FC1, FC2 test 1, everything. It has perfectly standard equipment and
> it isn't a problem of equipment when the installer in boot.iso does not
> support IDE disks like used by 99.999999999999 % of Earthers, and it
So why don't you list your equipment so maybe someone could fix the
problem or see a pattern?
I have the same problem (install from hard disk).
lspci :
00:00.0 Host bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8366/A/7 [Apollo KT266/A/333 AGP]
00:05.0 Unknown mass storage controller: Triones Technologies, Inc.
HPT366/368/370/370A/372 (rev 03)
00:06.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood Plus DVD Decoder
(rev 02)
00:07.0 ATM network controller: STMicroelectronics ST70137 [Unicorn] ADSL DMT Transceiver
(rev 10)
00:08.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 06)
00:09.0 Multimedia video controller: Brooktree Corporation Bt848 Video Capture (rev 12)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8233 PCI to ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C/VT8235
PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio
Controller (rev 10)
01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage IIC AGP (rev 7a)
/dev/hda is connected to "00:11.1".
dmesg :
[...]
VP_IDE: IDE controller at PCI slot 0000:00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8233 (rev 00) IDE UDMA100 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6Y080L0, ATA DISK drive
[...]
hda: max request size: 128KiB
hda: 160086528 sectors (81964 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: hda1 hda2 hda3
[...]
See attachment for the full dmesg. It come from a custom kernel
(2.6.4-1.290.custom).
The dmesg from anaconda is very (too?) small and not useful. See
attachment for the full /root/install.log.syslog after the installation
from CD has done.
"Install from CD" work.
Is there something I should file in bugzilla ?
Joel