Setup: FC2 test1
Kernel: kernel-2.6.6-1.376
I've been trying to get sound working for several days on and off.
Went back and read the relevant posts or at least what I could find.
Tried several of the suggestions ... still not getting anywhere.
At this point I have so much crap in /etc/modprobe.conf and in
/etc/rc.d/rc.local I'd like to clean the slate and start from square
one.
Has anyone posted a step by step guide to getting this setup? It
seems to be getting unduly complex.
Running lsmod I see a pile of sound related stuff a yard long.
Seems like a lot of junk to make a sound.
dmesg shows this sound related output:
intel8x0_measure_ac97_clock: measured 49486 usecs
intel8x0: clocking to 41161
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49487 usecs
intel8x0: clocking to 41161
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 49487 usecs
intel8x0: clocking to 41161
Current /etc/modprobe.conf:
alias eth0 3c59x
alias eth1 e100
include /etc/modprobe.conf.dist
alias usb-controller ehci-hcd
alias usb-controller1 ohci-hcd
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
# [HP 05/23/04 09:25 alsa part:]
alias char-major-116 snd
# post-install sound-slot-0 /sbin/modprobe --ignore-install sound-slot-0 &&
/bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
# pre-remove sound-slot-0 /bin/aumix-minimal -f /etc/.aumixrc -S /dev/null 2>&1
|| :
alias sound-slot-0 snd-intel8x0
install sound-slot-0 /sbin/modprobe --ignore-install sound-slot-0 &&
/bin/aumix-minimal -f /etc/.aumixrc -L >/dev/null 2>&1 || :
Current /etc/rc.d/rc.local
touch /var/lock/subsys/local
modprobe snd-seq-oss
modprobe snd-pcm-oss
modprobe snd_intel8x0
Aumix is zeroed out on every boot but even setting it wide open
doesn't give me anything.
`system-config-soundcard' fails but starts with a warning about
invalid utf-8 junk in something to do with desktop:
(system-config-soundcard.py:2767): Gdk-WARNING **:
DESKTOP_STARTUP_ID contains invalid UTF-8
Going through the rest of the proceedure does nothing usefull.
How can I clean this mess up and start one step at a time with some
chance of debugging my problem?