dragoran wrote:
Alan Cox wrote:
On Wed, Feb 01, 2006 at 04:26:33PM +0200, Gilboa Davara wrote:
hda: task_in_intr: status=0x59 { DriveReady SeekComplete DataRequest Error } hda: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=78221567, sector=78156288
What size is /dev/hda
40GB ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: Host Protected Area detected. current capacity is 78156288 sectors (40016 MB) native capacity is 78156289 sectors (40016 MB) hda: Host Protected Area disabled. hda: 78156289 sectors (40016 MB) w/1024KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes not supported hda: hda1 what smart info should I post?
smartctl -l error /dev/hda smartctl version 5.33 [x86_64-redhat-linux-gnu] Copyright (C) 2002-4 Bruce AllenHome page is http://smartmontools.sourceforge.net/
=== START OF READ SMART DATA SECTION === SMART Error Log Version: 1 ATA Error Count: 101 (device log contains only the most recent five errors) CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 101 occurred at disk power-on lifetime: 13962 hours (581 days + 18 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 00 00 00 f0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 01 00 00 00 f0 00 00:00:14.471 READ DMA b0 da 00 00 4f c2 f0 00 00:00:14.364 SMART RETURN STATUS b0 d2 00 00 4f c2 f0 00 00:00:14.364 SMART ENABLE/DISABLE ATTRIBUTE AUTOSAVE b0 d8 00 00 4f c2 f0 00 00:00:14.364 SMART ENABLE OPERATIONS 91 00 3f 00 00 00 ff 00 00:00:14.364 INITIALIZE DEVICE PARAMETERS [OBS-6]
Error 100 occurred at disk power-on lifetime: 13962 hours (581 days + 18 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 01 00 00 b1 Error: ICRC, ABRT at LBA = 0x01000001 = 16777217
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 01 00 00 b1 00 00:01:37.756 READ DMA c8 00 40 01 00 00 b1 00 00:01:37.285 READ DMA 10 00 3f 00 00 00 b0 00 00:01:37.285 RECALIBRATE [OBS-4] c8 00 40 01 00 00 b1 00 00:01:36.821 READ DMA c8 00 40 01 00 00 b1 00 00:01:36.385 READ DMA
Error 99 occurred at disk power-on lifetime: 13962 hours (581 days + 18 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 01 00 00 b1 Error: ICRC, ABRT at LBA = 0x01000001 = 16777217
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 01 00 00 b1 00 00:01:37.285 READ DMA 10 00 3f 00 00 00 b0 00 00:01:37.285 RECALIBRATE [OBS-4] c8 00 40 01 00 00 b1 00 00:01:36.821 READ DMA c8 00 40 01 00 00 b1 00 00:01:36.385 READ DMA c8 00 08 01 00 00 b0 00 00:01:35.643 READ DMA
Error 98 occurred at disk power-on lifetime: 13962 hours (581 days + 18 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 01 00 00 b1 Error: ICRC, ABRT at LBA = 0x01000001 = 16777217
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 01 00 00 b1 00 00:01:36.821 READ DMA c8 00 40 01 00 00 b1 00 00:01:36.385 READ DMA c8 00 08 01 00 00 b0 00 00:01:35.643 READ DMA c6 00 10 00 00 00 b0 00 00:01:35.643 SET MULTIPLE MODE 10 00 3f 00 00 00 b0 00 00:01:35.643 RECALIBRATE [OBS-4]
Error 97 occurred at disk power-on lifetime: 13962 hours (581 days + 18 hours) When the command that caused the error occurred, the device was active or idle.
After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 84 51 00 01 00 00 b1 Error: ICRC, ABRT at LBA = 0x01000001 = 16777217
Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c8 00 40 01 00 00 b1 00 00:01:36.385 READ DMA c8 00 08 01 00 00 b0 00 00:01:35.643 READ DMA c6 00 10 00 00 00 b0 00 00:01:35.643 SET MULTIPLE MODE 10 00 3f 00 00 00 b0 00 00:01:35.643 RECALIBRATE [OBS-4] 91 00 3f 3f ff 3b bf 00 00:01:35.643 INITIALIZE DEVICE PARAMETERS [OBS-6]