When I swapped pulseaudio with pipewire, I did not use the *swap* argument,
but installed pipewire over it:
1. dnf install pipewire pipewire-pulseaudio --allowerasing
2. reboot computer
3. try that pipewire is running: *pactl info *check that pulseaudio
server runs (on Pipewire)
I was successful with this on Fedora Rawhide. On Fedora, this brings me the
following journalctl logs:
led 25 10:59:51 vseved rtkit-daemon[1089]: Successfully made thread 1668 of
process 1668 (/usr/bin/pipewire-pulse) owned by '42' high priority at nice
level -11.
led 25 10:59:51 vseved rtkit-daemon[1089]: Successfully made thread 1669 of
process 1668 (/usr/bin/pipewire-pulse) owned by '42' RT at priority 20.
led 25 10:59:51 vseved rtkit-daemon[1089]: Successfully made thread 1727 of
process 1727 (/usr/bin/pipewire) owned by '42' high priority at nice level
-11.
led 25 10:59:52 vseved rtkit-daemon[1089]: Successfully made thread 1729 of
process 1727 (/usr/bin/pipewire) owned by '42' RT at priority 20.
led 25 10:59:52 vseved rtkit-daemon[1089]: Successfully made thread 1840 of
process 1840 (/usr/bin/pipewire-media-session) owned by '42' high priority
at nice level -11.
led 25 10:59:52 vseved rtkit-daemon[1089]: Successfully made thread 1842 of
process 1840 (/usr/bin/pipewire-media-session) owned by '42' RT at priority
20.
led 25 11:00:01 vseved rtkit-daemon[1089]: Successfully made thread 2354 of
process 2354 (/usr/bin/pipewire-pulse) owned by '1000' high priority at
nice level -11.
led 25 11:00:01 vseved rtkit-daemon[1089]: Successfully made thread 2355 of
process 2354 (/usr/bin/pipewire-pulse) owned by '1000' RT at priority 20.
led 25 11:00:02 vseved rtkit-daemon[1089]: Successfully made thread 2593 of
process 2593 (/usr/bin/pipewire) owned by '1000' high priority at nice
level -11.
led 25 11:00:02 vseved rtkit-daemon[1089]: Successfully made thread 2595 of
process 2593 (/usr/bin/pipewire) owned by '1000' RT at priority 20.
led 25 11:00:02 vseved rtkit-daemon[1089]: Successfully made thread 2741 of
process 2741 (/usr/bin/pipewire-media-session) owned by '1000' high
priority at nice level -11.
led 25 11:00:02 vseved rtkit-daemon[1089]: Successfully made thread 2751 of
process 2741 (/usr/bin/pipewire-media-session) owned by '1000' RT at
priority 20.
led 25 11:00:13 vseved systemd[1430]: pipewire-pulse.service: Succeeded.
led 25 11:00:13 vseved systemd[1430]: pipewire.service: Succeeded.
led 25 11:00:13 vseved systemd[1430]: pipewire-pulse.socket: Succeeded.
led 25 11:00:13 vseved systemd[1430]: pipewire.socket: Succeeded.
led 25 11:00:27 vseved pipewire-media-session[2741]: GetManagedObjects()
failed: org.freedesktop.DBus.Error.NoReply
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:12
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:13
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:14
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:15
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:17
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:19
error:19 (Operation not supported)
led 25 11:02:00 vseved pipewire-pulse[2354]: pulse-server 0x55ea4eb3b570:
[Ovládání hlasitosti PulseAudio] ERROR command:87 (EXTENSION) tag:21
error:19 (Operation not supported)
Audio works and settings can be still done by pavucontrol, for example.
On Sun, Jan 24, 2021 at 6:28 PM Qiyu Yan <yanqiyu(a)fedoraproject.org> wrote:
My procedure:
1. sudo swap pulseaudio pipewire-pulseaudio --allowerasing
--enablerepo=updates-testing
If you lost sound:
2. sudo systemctl enable --global pipewire-pulse.socket
The second step should be done automatically, but it's not the case for
me...
Garry T. Williams <gtwilliams(a)gmail.com> 于 2021年1月25日周一 上午12:53写道:
> What is the procedure for testing pipewire on a F33 system?
>
> (I'm obviously doing something wrong since the bug seems to not make
> sense to anyone:
https://bugzilla.redhat.com/show_bug.cgi?id=1912150
> and yet my system will not function at all for audio after I swap in
> pipewire for pulseaudio.)
>
> --
> Garry T. Williams
>
>
> _______________________________________________
> test mailing list -- test(a)lists.fedoraproject.org
> To unsubscribe send an email to test-leave(a)lists.fedoraproject.org
> Fedora Code of Conduct:
>
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
> List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
> List Archives:
>
https://lists.fedoraproject.org/archives/list/test@lists.fedoraproject.org
>
_______________________________________________
test mailing list -- test(a)lists.fedoraproject.org
To unsubscribe send an email to test-leave(a)lists.fedoraproject.org
Fedora Code of Conduct:
https://docs.fedoraproject.org/en-US/project/code-of-conduct/
List Guidelines:
https://fedoraproject.org/wiki/Mailing_list_guidelines
List Archives:
https://lists.fedoraproject.org/archives/list/test@lists.fedoraproject.org
--
Lukáš Růžička
FEDORA QE, RHCE
Red Hat
<
https://www.redhat.com>
Purkyňova 115
612 45 Brno - Královo Pole
lruzicka(a)redhat.com
TRIED AND PERSONALLY TESTED, ERGO TRUSTED. <
https://redhat.com/trusted>