test February 2022

test@lists.fedoraproject.org

21 participants
234 discussions

Image build for Lenovo P1 G4 preload
by Mark Pearson 04 Feb '22

04 Feb '22

Hi Fedora-team, <As requested posting this request to the mailing list> We're looking at doing a release of Fedora for the P1 G4. We've been trying to get the Nouveau driver to a stage where we can do a release for both P1 G4 and P15 G2 but it's just not ready yet (still got issues with external displays). After discussion with the workstation team as to if we pull the plug on these platforms the idea was floated to do a release for the UMA configuration (i.e. no Nvidia GPU). Unfortunately this is only possible on the P1 G4....but it's better than nothing Fedora 35 base image unfortunately doesn't have the updated audio drivers needed, so I need an updated F35 image that we can use as the preload. We did this previously with F34 for the X1 Carbon 9. Could we get this image built please? When it's available we'll put it thru QA and hopefully be able to get out something with Fedora :) Let me know if any questions or concerns mark

3 2

Fedora-Cloud-34-20220204.0 compose check report
by Fedora compose checker 04 Feb '22

04 Feb '22

No missing expected images. Soft failed openQA tests: 1/8 (x86_64), 1/8 (aarch64) (Tests completed, but using a workaround for a known bug) Old soft failures (same test soft failed in Fedora-Cloud-34-20220203.0): ID: 1119127 Test: x86_64 Cloud_Base-qcow2-qcow2 cloud_autocloud URL: https://openqa.fedoraproject.org/tests/1119127 ID: 1119140 Test: aarch64 Cloud_Base-qcow2-qcow2 cloud_autocloud@uefi URL: https://openqa.fedoraproject.org/tests/1119140 Passed openQA tests: 7/8 (x86_64), 7/8 (aarch64) -- Mail generated by check-compose: https://pagure.io/fedora-qa/check-compose

1 0

Fedora-Cloud-35-20220204.0 compose check report
by Fedora compose checker 04 Feb '22

04 Feb '22

No missing expected images. Soft failed openQA tests: 1/8 (x86_64), 1/8 (aarch64) (Tests completed, but using a workaround for a known bug) Old soft failures (same test soft failed in Fedora-Cloud-35-20220203.0): ID: 1119110 Test: x86_64 Cloud_Base-qcow2-qcow2 cloud_autocloud URL: https://openqa.fedoraproject.org/tests/1119110 ID: 1119123 Test: aarch64 Cloud_Base-qcow2-qcow2 cloud_autocloud@uefi URL: https://openqa.fedoraproject.org/tests/1119123 Passed openQA tests: 7/8 (x86_64), 7/8 (aarch64) -- Mail generated by check-compose: https://pagure.io/fedora-qa/check-compose

1 0

Fedora 35 updates-testing report
by updates＠fedoraproject.org 04 Feb '22

04 Feb '22

The following Fedora 35 Security updates need testing: Age URL 10 https://bodhi.fedoraproject.org/updates/FEDORA-2022-9d02441b24 util-linux-2.37.3-1.fc35 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-1e29b8997a mingw-qt5-qtsvg-5.15.2-6.fc35 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-51067372d7 stratisd-3.0.2-2.fc35 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-1b76e3a192 rust-afterburn-5.2.0-4.fc35 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-c4786825dd expat-2.4.4-1.fc35 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-f4b7f896e3 perl-App-cpanminus-1.7045-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-c138fbb8e0 php-laminas-form-2.17.1-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-8f968eea82 phoronix-test-suite-10.8.1-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-e6b2bd5b50 lua-5.4.4-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-57fd391bf8 kernel-5.16.5-200.fc35 kernel-headers-5.16.5-200.fc35 kernel-tools-5.16.5-200.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-e7fd530688 python-django-3.2.12-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-416be040a8 java-1.8.0-openjdk-1.8.0.322.b06-2.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-15decf791f rlwrap-0.45.2-1.fc35 The following Fedora 35 Critical Path updates have yet to be approved: Age URL 68 https://bodhi.fedoraproject.org/updates/FEDORA-2021-12f6c46ad8 qemu-6.1.0-13.fc35 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-02e49867f7 tigervnc-1.12.0-4.fc35 10 https://bodhi.fedoraproject.org/updates/FEDORA-2022-9d02441b24 util-linux-2.37.3-1.fc35 7 https://bodhi.fedoraproject.org/updates/FEDORA-2022-001c2215a6 bolt-0.9.2-1.fc35 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-c4786825dd expat-2.4.4-1.fc35 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-faaf4ebee4 libwacom-1.12.1-2.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-57fd391bf8 kernel-5.16.5-200.fc35 kernel-headers-5.16.5-200.fc35 kernel-tools-5.16.5-200.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-e6b2bd5b50 lua-5.4.4-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-45431dee2f ytnef-2.0-1.fc35 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-c917683ac9 python-blivet-3.4.3-1.fc35 The following builds have been pushed to Fedora 35 updates-testing CuraEngine-4.13.1-1.fc35 aardvark-dns-1.0.0~rc1-2.fc35 ansible-inventory-grapher-2.5.0-10.fc35 armadillo-10.8.2-1.fc35 container-selinux-2.176.0-1.fc35 containerd-1.5.9-1.fc35 copr-backend-1.153-1.fc35 copr-cli-1.98-1.fc35 copr-dist-git-0.52-1.fc35 copr-frontend-1.184-1.fc35 copr-keygen-1.82-1.fc35 copr-rpmbuild-0.55.2-1.fc35 cura-4.13.1-2.fc35 cura-fdm-materials-4.13.0-1.fc35 dotnet-build-reference-packages-0-11.20220201git045b288.fc35 dotnet3.1-3.1.416-2.fc35 dotnet6.0-6.0.101-3.fc35 falkon-3.2.0-2.fc35 gh-2.5.0-1.fc35 gobuster-3.1.0-1.fc35 golang-github-distribution-3-2.8.0~beta.1-1.20220203gitb609265.fc35 golang-github-intel-goresctrl-0.2.0-3.fc35 golang-github-redis-7-7.4.1-1.fc35 golang-github-spf13-cast-1.4.1-1.fc35 golang-github-spf13-cobra-1.3.0-1.fc35 golang-github-ssdb-gossdb-0-0.1.20220203git88f6b59.fc35 golang-github-wendal-errors-0-0.1.20220203git7f31f4b.fc35 golang-github-wendal-goyaml2-2.0-1.fc35 hwdata-0.356-1.fc35 ipython-7.26.0-3.fc35 libarcus-4.13.1-1.fc35 libdxfrw-1.0.1-3.fc35 librecad-2.2.0-0.13.rc3.fc35 libsavitar-4.13.1-1.fc35 libusb1-1.0.25-1.fc35 libxo-1.6.0-1.fc35 lyx-2.3.6.1-5.fc35 mingw-expat-2.4.4-1.fc35 mingw-gdk-pixbuf-2.42.6-4.fc35 mkvtoolnix-64.0.0-1.fc35 mygnuhealth-1.0.5-1.fc35 nmstate-1.2.0-1.fc35 perl-Geo-IPfree-1.160.000-1.fc35 perl-Test2-Harness-1.0.101-1.fc35 php-laminas-mvc-3.3.1-1.fc35 php-nyholm-psr7-1.5.0-1.fc35 php-react-http-1.6.0-1.fc35 pipewire-0.3.45-1.fc35 pyshp-2.2.0-1.fc35 python-copr-1.115-1.fc35 python-copr-common-0.14-1.fc35 python-imbalanced-learn-0.9.0-2.fc35 python-lazyarray-0.5.2-1.fc35 python-mapbox-earcut-1.0.0-1.fc35 python-networkmanager-2.2-5.fc35 python-uranium-4.13.1-1.fc35 rpi-imager-1.7-1.fc35 rpkg-util-3.2-1.fc35 rust-clap-3.0.14-1.fc35 rust-clap_derive-3.0.14-1.fc35 rust-cxx-1.0.64-1.fc35 rust-cxx-build-1.0.64-1.fc35 rust-cxx-gen-0.7.64-1.fc35 rust-cxxbridge-flags-1.0.64-1.fc35 rust-cxxbridge-macro-1.0.64-1.fc35 rust-mac_address-1.1.3-1.fc35 rust-mint-0.5.9-1.fc35 rust-piston-graphics_api_version-1.0.1-1.fc35 rust-pretty_assertions-1.1.0-1.fc35 rust-retry-1.3.1-1.fc35 rust-serde-1.0.136-1.fc35 rust-serde_derive-1.0.136-1.fc35 rust-serde_test-1.0.136-1.fc35 tellico-3.4.3-1.fc35 udiskie-2.4.1-1.fc35 vdr-epgsearch-2.4.2-0.1.20220201git76d2b10.fc35 vdr-live-3.1.5-1.fc35 xen-4.15.2-1.fc35 xstream-1.4.19-1.fc35 Details about builds: ================================================================================ CuraEngine-4.13.1-1.fc35 (FEDORA-2022-b32cb71cc2) Engine for processing 3D models into G-code instructions for 3D printers -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-1 - Update to 4.13.1 * Wed Jan 19 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.0-1 - Update to 4.13.0 * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:4.12.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-4 - Update to 4.12.1 * Sat Nov 6 2021 Adrian Reber <adrian(a)lisas.de> - 1:4.11.0-4 - Rebuilt for protobuf 3.19.0 * Mon Oct 25 2021 Adrian Reber <adrian(a)lisas.de> - 1:4.11.0-3 - Rebuilt for protobuf 3.18.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ aardvark-dns-1.0.0~rc1-2.fc35 (FEDORA-2022-2a101a0345) Authoritative DNS server for A/AAAA container records -------------------------------------------------------------------------------- Update Information: upload source to lookaside cache ---- initial package -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Lokesh Mandvekar <lsm5(a)fedoraproject.org> 1.0.0~rc1-1 - bump to v1.0.0-rc1 * Thu Jan 27 2022 Lokesh Mandvekar <lsm5(a)fedoraproject.org> 0-1 - Resolves: #2043581 - initial build -------------------------------------------------------------------------------- References: [ 1 ] Bug #2043581 - Review Request: aardvark-dns - Authoritative DNS server for A/AAAA container records https://bugzilla.redhat.com/show_bug.cgi?id=2043581 -------------------------------------------------------------------------------- ================================================================================ ansible-inventory-grapher-2.5.0-10.fc35 (FEDORA-2022-1df45becf6) Creates graphs representing ansible inventory -------------------------------------------------------------------------------- Update Information: Allow users to choose between ansible and ansible-core. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Maxwell G <gotmax(a)e.email> - 2.5.0-10 - Allow users to choose between ansible and ansible-core. - Make compliant with SourceURL Guidelines. * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.5.0-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 Parag Nemade <pnemade AT redhat DOT com> - 2.5.0-8 - Resolves:rhbz#2040942 - Change package requirement from ansible-python3 to ansible -------------------------------------------------------------------------------- ================================================================================ armadillo-10.8.2-1.fc35 (FEDORA-2022-585dba9e08) Fast C++ matrix library with syntax similar to MATLAB and Octave -------------------------------------------------------------------------------- Update Information: Update to the latest stable release. The main changes are: * faster handling of symmetric matrices by `pinv()` and `rank()`; * faster handling of diagonal matrices by `inv_sympd()`, `pinv()`, `rank()`; * expanded `norm()` to handle integer vectors and matrices; * added `datum::tau` to replace 2��. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 10.8.2-1 - update to 10.8.2 * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 10.7.4-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2033182 - armadillo-10.8.2 is available https://bugzilla.redhat.com/show_bug.cgi?id=2033182 -------------------------------------------------------------------------------- ================================================================================ container-selinux-2.176.0-1.fc35 (FEDORA-2022-c0b31c2bc9) SELinux policies for container runtimes -------------------------------------------------------------------------------- Update Information: bump to v2.176.0 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Lokesh Mandvekar <lsm5(a)fedoraproject.org> 2:2.176.0-1 - bump to v2.176.0 * Tue Feb 1 2022 Lokesh Mandvekar <lsm5(a)fedoraproject.org> 2:2.174.0-1 - bup to v2.174.0 * Thu Jan 27 2022 Lokesh Mandvekar <lsm5(a)fedoraproject.org> 2:2.173.1-2 - switch to autospec -------------------------------------------------------------------------------- ================================================================================ containerd-1.5.9-1.fc35 (FEDORA-2022-9cfeb6f709) Open and reliable container runtime -------------------------------------------------------------------------------- Update Information: Update to 1.5.9. Fixes FTBFS. Closes rhbz#2045277. Mitigates CVE-2021-43816. Closes rhbz#2044434. Closes rhbz#2044436. Temporarily build using vendored dependencies. -------------------------------------------------------------------------------- ChangeLog: * Mon Jan 31 2022 Maxwell G <gotmax(a)e.email> - 1.5.9-1 - Update to 1.5.9. Fixes FTBFS. Closes rhbz#2045277. - Mitigates CVE-2021-43816. Closes rhbz#2044434. Closes rhbz#2044436. - Temporarily build using vendored dependencies. * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.5.8-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2044434 - CVE-2021-43816 containerd: Unprivileged pod may bind mount any privileged regular file on disk https://bugzilla.redhat.com/show_bug.cgi?id=2044434 -------------------------------------------------------------------------------- ================================================================================ copr-backend-1.153-1.fc35 (FEDORA-2022-103e6db92c) Backend for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.153-1 - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ copr-cli-1.98-1.fc35 (FEDORA-2022-103e6db92c) Command line interface for COPR -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.98-1 - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ================================================================================ copr-dist-git-0.52-1.fc35 (FEDORA-2022-103e6db92c) Copr services for Dist Git server -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.52-1 - dist-git: python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ copr-frontend-1.184-1.fc35 (FEDORA-2022-103e6db92c) Frontend for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.184-1 - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ================================================================================ copr-keygen-1.82-1.fc35 (FEDORA-2022-103e6db92c) Part of Copr build system. Aux service that generate keys for signd -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.82-1 - Disable coverage analysis during RPM build -------------------------------------------------------------------------------- ================================================================================ copr-rpmbuild-0.55.2-1.fc35 (FEDORA-2022-103e6db92c) Run COPR build tasks -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.55.2-1 - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place -------------------------------------------------------------------------------- ================================================================================ cura-4.13.1-2.fc35 (FEDORA-2022-b32cb71cc2) 3D printer / slicing GUI -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-2 - Fix error loading SentryLogger plugin * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:4.12.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Sun Jan 2 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-2 - Backport fix for Python 3.10 * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ cura-fdm-materials-4.13.0-1.fc35 (FEDORA-2022-b32cb71cc2) Cura FDM Material database -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ dotnet-build-reference-packages-0-11.20220201git045b288.fc35 (FEDORA-2022-e49dbaa4e5) Reference packages needed by the .NET Core SDK build -------------------------------------------------------------------------------- Update Information: This is the December 2021 update for .NET Core 3.1 It updates .NET Core 3.1 to SDK 3.1.416 and Runtime 3.1.22 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Omair Majid <omajid(a)redhat.com> - 0-11.20220201git045b288 - Update to upstream commit 045b288 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 0-10.20200608gitcd5a8c6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ dotnet3.1-3.1.416-2.fc35 (FEDORA-2022-e49dbaa4e5) .NET Core Runtime and SDK -------------------------------------------------------------------------------- Update Information: This is the December 2021 update for .NET Core 3.1 It updates .NET Core 3.1 to SDK 3.1.416 and Runtime 3.1.22 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Omair Majid <omajid(a)redhat.com> - 3.1.416-2 - Disable bootstrap * Mon Jan 24 2022 Omair Majid <omajid(a)redhat.com> - 3.1.416-1 - Update to .NET SDK 3.1.416 and Runtime 3.1.22 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.118-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Nov 2 2021 Mamoru TASAKA <mtasaka(a)fedoraproject.org> - 3.1.118-3 - rebuild against new liblttng-ust * Tue Sep 14 2021 Sahana Prasad <sahana(a)redhat.com> - 3.1.118-2 - Rebuilt with OpenSSL 3.0.0 -------------------------------------------------------------------------------- ================================================================================ dotnet6.0-6.0.101-3.fc35 (FEDORA-2022-7884684e5a) .NET Runtime and SDK -------------------------------------------------------------------------------- Update Information: This is the December 2021 update for .NET 6. It was released as a security fix upstream, though actual CVE doesn't seem to affect Linux. -------------------------------------------------------------------------------- ChangeLog: * Fri Jan 28 2022 Omair Majid <omajid(a)redhat.com> - 6.0.101-3 - Update to .NET SDK 6.0.101 and Runtime 6.0.1 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 6.0.100-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ falkon-3.2.0-2.fc35 (FEDORA-2022-b3ab048d7b) Modern web browser -------------------------------------------------------------------------------- Update Information: An update of Falkon to the latest upstream release, version 3.2.0. This update adds support for screen sharing and includes several small improvements and bug fixes: * Add support for Screen Capture (Qt 5.13.2+) * Option for internal PDFium-based viewer (Qt 5.13+) * CookieManager: Add support for selecting more than one cookie at once * Correct the sorting for cookies white- and black- lists * Speeddial: decode initialScript data as Utf8 * Set current tab as parent for duplicated tab * add support for detaching tabs via context menu (BUG 443947, !22 from Fran Rogers) * BookmarksManager: Don't allow to create bookmark without parent * Remove the padding of the bookmark bar * Added context menu item to bookmarks toolbar for creating folder * Preferences: Add links to KDE store for installing themes/extensions * OcsSupport: Add initial support for downloading themes/extensions * Add filter to preferences extensions page * SideBarManager: Clear active sidebar upon close * Added focus for searchbar in history sidebar & bookmark sidebar * SearchToolBar: Remove warning message that no results were found * SearchBar - Show number of matches found on page search * added pause/resume for downloads * Prompt user when KWallet is disabled * KDEFrameworksIntegration: Create Purpose menu in init * GreaseMonkey: Fix detecting *.user.js urls * Added QLoggingCategory to Falkon * Handle web push notifications with Falkon notification system * Fix name and set desktop entry for notifications * NetworkManager: Fix QtWebEngine warning about registering schemes * Don't use subfolders for QML/Python extensions * ThemeManager: Implement removing locally installed themes * Plugins: Implement removing locally installed plugins * Plugins: Use embedded JSON metadata for shared library plugins * RunAction plugin: set alternatingRowColors for listWidget * VerticalTabs: Accept click event on tree collapse * VerticalTabs: Draw unloaded tabs with "Disabled" color palette * VerticalTabs: Add child tab with middle click on "New Tab" button * VerticalTabs: Correctly recognize tree collapse / expand button * VerticalTabs: Also override Ctrl+PgUp/PgDown shortcuts -------------------------------------------------------------------------------- ChangeLog: * Mon Jan 31 2022 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.0-2 - add optional Python plugin support (--with python) (#1749896) - keep it disabled by default though because of shiboken2 bug (#2048781) * Mon Jan 31 2022 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.0-1 - update to 3.2.0 (new upstream feature release), drop upstream patches - add BuildRequires: kf5-karchive-devel, dependency added upstream * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.0-11 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Sep 14 2021 Sahana Prasad <sahana(a)redhat.com> - 3.1.0-10 - Rebuilt with OpenSSL 3.0.0 -------------------------------------------------------------------------------- ================================================================================ gh-2.5.0-1.fc35 (FEDORA-2022-92a8c22b97) GitHub��s official command line tool -------------------------------------------------------------------------------- Update Information: Update to 2.5.0 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Mikel Olasagasti Uranga <mikel(a)olasagasti.info> 2.5.0-1 - Update to 2.5.0 * Sat Jan 29 2022 Maxwell G <gotmax(a)e.email> 2.4.0-7 - Fix ldflags and rebuild for new go-rpm-macros. * Tue Jan 25 2022 Mikel Olasagasti Uranga <mikel(a)olasagasti.info> 2.4.0-6 - Fix test that fails with golang-1.18 - Closes rhbz#2045415 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 2.4.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 sixg0000d <sixg0000d(a)gmail.com> 2.4.0-4 - Fix: generate correct shell completions -------------------------------------------------------------------------------- ================================================================================ gobuster-3.1.0-1.fc35 (FEDORA-2022-5f9a0abaa1) Directory/File, DNS and VHost busting tool written in Go -------------------------------------------------------------------------------- Update Information: Update to 3.1.0 Close: rhbz#2049159 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Sandipan Roy <saroy(a)redhat.com> 3.1.0-1 - Update to 3.1.0 Close: rhbz#2049159 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.0.1-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049159 - gobuster-3.1.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049159 -------------------------------------------------------------------------------- ================================================================================ golang-github-distribution-3-2.8.0~beta.1-1.20220203gitb609265.fc35 (FEDORA-2022-2866838304) The toolkit to pack, ship, store, and deliver container content -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sat Jan 29 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 2.8.0~beta.1-1 - Uncommitted changes -------------------------------------------------------------------------------- ================================================================================ golang-github-intel-goresctrl-0.2.0-3.fc35 (FEDORA-2022-bc83692fbd) Golang library for managing resctrl filesystem -------------------------------------------------------------------------------- Update Information: Disable binary expect on x86_64 -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0.2.0-2 - Uncommitted changes * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0.2.0-1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-redis-7-7.4.1-1.fc35 (FEDORA-2022-2db6467f11) Type-safe Redis client for Golang -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 7.4.1-1 - Uncommitted changes * Mon Aug 2 2021 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 7.4.0-1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-spf13-cast-1.4.1-1.fc35 (FEDORA-2022-c096834e64) Safe and easy casting from one type to another in Go -------------------------------------------------------------------------------- Update Information: Update to 1.4.1 Close: rhbz#1986390 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 1.4.1-1 - Update to 1.4.1 Close: rhbz#1986390 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.3.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #1986390 - golang-github-spf13-cast-1.4.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=1986390 -------------------------------------------------------------------------------- ================================================================================ golang-github-spf13-cobra-1.3.0-1.fc35 (FEDORA-2022-dca8e59f9c) Commander for modern Go CLI interactions -------------------------------------------------------------------------------- Update Information: Update to 1.3.0. Fixes rhbz#2033014. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Maxwell G <gotmax(a)e.email> 1.3.0-1 - Update to 1.3.0. Fixes rhbz#2033014. * Wed Feb 2 2022 Maxwell G <gotmax(a)e.email> 1.2.1-3 - Fix broken test and FTBFS (rhbz#2045615). Cleanup. * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.2.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2033014 - golang-github-spf13-cobra-1.3.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2033014 -------------------------------------------------------------------------------- ================================================================================ golang-github-ssdb-gossdb-0-0.1.20220203git88f6b59.fc35 (FEDORA-2022-7288b32944) SSDB Golang client -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.2 - Uncommitted changes * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-wendal-errors-0-0.1.20220203git7f31f4b.fc35 (FEDORA-2022-f54b17bab4) Enhanced errors package -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-wendal-goyaml2-2.0-1.fc35 (FEDORA-2022-e794a39779) YAML for Golang -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: -------------------------------------------------------------------------------- ================================================================================ hwdata-0.356-1.fc35 (FEDORA-2022-a0337b9f7a) Hardware identification and configuration data -------------------------------------------------------------------------------- Update Information: Update pci and vendor ids -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Vitezslav Crhonek <vcrhonek(a)redhat.com> - 0.356-1 - Update pci and vendor ids -------------------------------------------------------------------------------- ================================================================================ ipython-7.26.0-3.fc35 (FEDORA-2022-b58d156ab0) An enhanced interactive Python shell -------------------------------------------------------------------------------- Update Information: Fix CVE-2022-21699 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Lum��r Balhar <lbalhar(a)redhat.com> - 7.26.0-3 - Fix CVE-2022-21699 Resolves: rhbz#2047814 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2047814 - CVE-2022-21699 ipython: arbitrary code execution by cross user temporary files mismanagment [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2047814 -------------------------------------------------------------------------------- ================================================================================ libarcus-4.13.1-1.fc35 (FEDORA-2022-b32cb71cc2) Communication library between internal components for Ultimaker software -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 * Sat Nov 6 2021 Adrian Reber <adrian(a)lisas.de> - 4.11.0-3 - Rebuilt for protobuf 3.19.0 * Mon Oct 25 2021 Adrian Reber <adrian(a)lisas.de> - 4.11.0-2 - Rebuilt for protobuf 3.18.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ libdxfrw-1.0.1-3.fc35 (FEDORA-2022-2e85e6cfc9) Library to read/write DXF files -------------------------------------------------------------------------------- Update Information: Update librecad to 2.2.0 rc3. Apply fixes to libdxfrw and librecad for CVE-2021-45341, CVE-2021-45342, CVE-2021-45343. This also resolves the issue where some dwg files no longer opened. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Tom Callaway <spot(a)fedoraproject.org> - 1.0.1-3 - apply fixes from upstream, including fix for CVE-2021-45343 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.0.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2027148 - librecad-2.2.0-rc3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2027148 [ 2 ] Bug #2031379 - [regression] .dwg file no longer opens https://bugzilla.redhat.com/show_bug.cgi?id=2031379 [ 3 ] Bug #2046248 - CVE-2021-45341 librecad: buffer overflow in CDataMoji of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046248 [ 4 ] Bug #2046252 - CVE-2021-45342 librecad: buffer overflow in CDataList of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046252 [ 5 ] Bug #2046256 - CVE-2021-45343 librecad: NULL pointer dereference in the HATCH handling of libdxfrw can lead to DoS via a crafted DXF document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046256 -------------------------------------------------------------------------------- ================================================================================ librecad-2.2.0-0.13.rc3.fc35 (FEDORA-2022-2e85e6cfc9) Computer Assisted Design (CAD) Application -------------------------------------------------------------------------------- Update Information: Update librecad to 2.2.0 rc3. Apply fixes to libdxfrw and librecad for CVE-2021-45341, CVE-2021-45342, CVE-2021-45343. This also resolves the issue where some dwg files no longer opened. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Tom Callaway <spot(a)fedoraproject.org> - 2.2.0-0.13.rc3 - update to rc3 - apply upstream fix for CVE-2021-45342, CVE-2021-45341 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.2.0-0.12.rc2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2027148 - librecad-2.2.0-rc3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2027148 [ 2 ] Bug #2031379 - [regression] .dwg file no longer opens https://bugzilla.redhat.com/show_bug.cgi?id=2031379 [ 3 ] Bug #2046248 - CVE-2021-45341 librecad: buffer overflow in CDataMoji of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046248 [ 4 ] Bug #2046252 - CVE-2021-45342 librecad: buffer overflow in CDataList of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046252 [ 5 ] Bug #2046256 - CVE-2021-45343 librecad: NULL pointer dereference in the HATCH handling of libdxfrw can lead to DoS via a crafted DXF document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046256 -------------------------------------------------------------------------------- ================================================================================ libsavitar-4.13.1-1.fc35 (FEDORA-2022-b32cb71cc2) C++ implementation of 3mf loading with SIP Python bindings -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ libusb1-1.0.25-1.fc35 (FEDORA-2022-bf17b80ca9) Library for accessing USB devices -------------------------------------------------------------------------------- Update Information: Update to 1.0.25 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Benjamin Berg <bberg(a)redhat.com> 1.0.25-1 - Update to 1.0.25 -------------------------------------------------------------------------------- ================================================================================ libxo-1.6.0-1.fc35 (FEDORA-2022-dbd820d712) A Library for Generating Text, XML, JSON, and HTML Output -------------------------------------------------------------------------------- Update Information: New package libxo (https://github.com/Juniper/libxo) added for version 1.6.0 -------------------------------------------------------------------------------- ChangeLog: * Wed Aug 11 2021 Kanitha Chim <kchim(a)redhat.com> - 1.6.0-1 - Initial package -------------------------------------------------------------------------------- References: [ 1 ] Bug #2013814 - Review Request: libxo - A Library for Generating Text, XML, JSON, and HTML Output https://bugzilla.redhat.com/show_bug.cgi?id=2013814 -------------------------------------------------------------------------------- ================================================================================ lyx-2.3.6.1-5.fc35 (FEDORA-2022-925971a0aa) WYSIWYM (What You See Is What You Mean) document processor -------------------------------------------------------------------------------- Update Information: Fix bug when converting old layout files (fixes bz#1965118). -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 2.3.6.1-5 - fix #1965118 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.3.6.1-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ mingw-expat-2.4.4-1.fc35 (FEDORA-2022-88f6a3d290) MinGW Windows port of expat XML parser library -------------------------------------------------------------------------------- Update Information: Update to 2.4.4, fixes CVE-2022-23990. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Sandro Mani <manisandro(a)gmail.com> - 2.4.4-1 - Update to 2.4.4 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.4.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Jan 17 2022 Sandro Mani <manisandro(a)gmail.com> - 2.4.3-1 - Update to 2.4.3 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050214 - CVE-2022-23990 mingw-expat: expat: integer overflow in the doProlog function [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2050214 -------------------------------------------------------------------------------- ================================================================================ mingw-gdk-pixbuf-2.42.6-4.fc35 (FEDORA-2022-725db8230b) MinGW Windows GDK Pixbuf library -------------------------------------------------------------------------------- Update Information: Backport patch for CVE-2021-44648. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Sandro Mani <manisandro(a)gmail.com> - 2.42.6-4 - Backport patch for CVE-2021-44648 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.42.6-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049411 - CVE-2021-44648 mingw-gdk-pixbuf: gdk-pixbuf: heap-buffer overflow when decoding the lzw compressed stream of image data [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2049411 -------------------------------------------------------------------------------- ================================================================================ mkvtoolnix-64.0.0-1.fc35 (FEDORA-2022-d267c49a53) Matroska container manipulation utilities -------------------------------------------------------------------------------- Update Information: # Version 64.0.0 "Willows" 2021-12-27 ## New features and enhancements * MKVToolNix GUI: language dialog: when the user switches between the two edit modes, the mode's corresponding first control is automatically focussed. ## Bug fixes * all: language lists: the entries for "Ancient Greek (to 1453)" and "Modern Greek (1453-)" have been renamed to "Greek (ancient, -1453)" and "Greek (modern, 1453-)" respectively in order to be easier to find. * mkvmerge: VobSub reader: files containing `id: --` lines to indicate that the track language isn't known were rejected by `mkvmerge`. Now they're accepted, and `und` (undetermined) is used as the language. Fixes #3246. * MKVToolNix GUI: chapter editor: the "Save to Matroska or WebM file" function was using the wrong standard file dialog (the "open file" one instead of "save"), leading to confusing button names. Fixes #3242. * MKVToolNix GUI: high DPI scaling: fixed the icons in the tool selector having the wrong size for scaling factors other than 100% or 200%. Fixes #3229. -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Dominik Mierzejewski <rpm(a)greysector.net> - 64.0.0-1 - update to 64.0.0 (#2035773) -------------------------------------------------------------------------------- References: [ 1 ] Bug #2035773 - mkvtoolnix-64.0.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2035773 -------------------------------------------------------------------------------- ================================================================================ mygnuhealth-1.0.5-1.fc35 (FEDORA-2022-94f02924ab) The GNU Health Personal Health Record (PHR) -------------------------------------------------------------------------------- Update Information: Initial import (fedora#2038734). -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 alciregi <alciregi(a)fedoraproject.org> 1.0.5-1 - Initial import (fedora#2038734). -------------------------------------------------------------------------------- ================================================================================ nmstate-1.2.0-1.fc35 (FEDORA-2022-58fbb20e17) Declarative network manager API -------------------------------------------------------------------------------- Update Information: Upgrade to 1.2.0 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Fernando Fernandez Mancera <ffmancera(a)riseup.net> - 1.2.0-1 - Upgrade to 1.2.0 -------------------------------------------------------------------------------- ================================================================================ perl-Geo-IPfree-1.160.000-1.fc35 (FEDORA-2022-007978fe30) Look up the country of an IPv4 Address -------------------------------------------------------------------------------- Update Information: This release adds a code for Kosovo. It also rempliments caching to free from a dependnecy on Memoize Perl module. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Petr Pisar <ppisar(a)redhat.com> - 1.160.000-1 - 1.160000 bump - Package the tests -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049731 - Upgrade perl-Geo-IPfree to 1.160000 https://bugzilla.redhat.com/show_bug.cgi?id=2049731 -------------------------------------------------------------------------------- ================================================================================ perl-Test2-Harness-1.0.101-1.fc35 (FEDORA-2022-cee59c9ecf) Test2 Harness designed for the Test2 event system -------------------------------------------------------------------------------- Update Information: This relase fixes replay output of subtests. ---- This release fixes tests. It also adds a threshold for fetching duration data to speed up smaller test suites. ---- This release fixes handling commands after adding subtests. It also adds new options to exclude particular, changed files when running covarage tests. ---- This release fixes reloading files, replaying tests, and handling environment variables when early preloading Test2::API. This update also shows failed subtests in a final summary. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.101-1 - 1.000101 bump * Wed Feb 2 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.100-1 - 1.000100 bump * Fri Jan 28 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.99-2 - Adapt tests to slow CI (bug #2046568) * Fri Jan 28 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.99-1 - 1.000099 bump * Fri Jan 28 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.98-1 - 1.000098 bump * Thu Jan 27 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.96-1 - 1.000096 bump * Mon Jan 10 2022 Petr Pisar <ppisar(a)redhat.com> - 1.0.95-1 - 1.000095 bump -------------------------------------------------------------------------------- References: [ 1 ] Bug #2037572 - perl-Test2-Harness-1.000095 is available https://bugzilla.redhat.com/show_bug.cgi?id=2037572 [ 2 ] Bug #2046568 - perl-Test2-Harness-1.000096 is available https://bugzilla.redhat.com/show_bug.cgi?id=2046568 [ 3 ] Bug #2047399 - perl-Test2-Harness-1.000098 is available https://bugzilla.redhat.com/show_bug.cgi?id=2047399 [ 4 ] Bug #2049223 - perl-Test2-Harness-1.000100 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049223 [ 5 ] Bug #2049915 - perl-Test2-Harness-1.000101 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049915 -------------------------------------------------------------------------------- ================================================================================ php-laminas-mvc-3.3.1-1.fc35 (FEDORA-2022-3e79f00bba) Laminas Framework Mvc component -------------------------------------------------------------------------------- Update Information: **Version 3.3.1** Documentation * 95: Fully clean up quick start thanks to @afilina * 94: Simplify and clarify routing in quick start; remove default route thanks to @afilina * 92: Improve the "Create a Controller" section in the Quick Start thanks to @afilina -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Remi Collet <remi(a)remirepo.net> - 3.3.1-1 - update to 3.3.1 -------------------------------------------------------------------------------- ================================================================================ php-nyholm-psr7-1.5.0-1.fc35 (FEDORA-2022-c36717aed1) A fast PHP7 implementation of PSR-7 -------------------------------------------------------------------------------- Update Information: **Version 1.5.0** Added - Add explicit `@return mixed` - Add explicit return types to HttplugFactory Fixed - Improve error handling with streams -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Remi Collet <remi(a)remirepo.net> - 1.5.0-1 - update to 1.5.0 -------------------------------------------------------------------------------- ================================================================================ php-react-http-1.6.0-1.fc35 (FEDORA-2022-dad89e7aad) Library for building an evented http server -------------------------------------------------------------------------------- Update Information: **Version 1.6.0** (2022-02-03) * Feature: Add factory methods for common HTML/JSON/plaintext/XML response types. (#439 by @clue) * Feature: Expose all status code constants via `Response` class. (#432 by @clue) * Feature: Full support for PHP 8.1 release. (#433 by @SimonFrings and #434 by @clue) * Feature / Fix: Improve protocol handling for HTTP responses with no body. (#429 and #430 by @clue) * Internal refactoring and internal improvements for handling requests and responses. (#422 by @WyriHaximus and #431 by @clue) * Improve documentation, update proxy examples, include error reporting in examples. (#420, #424, #426, and #427 by @clue) * Update test suite to use default loop. (#438 by @clue) -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Remi Collet <remi(a)remirepo.net> - 1.6.0-1 - update to 1.6.0 - raise dependency on clue/block-react 1.5 - add dependency on fig/http-message-util * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.5.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ pipewire-0.3.45-1.fc35 (FEDORA-2022-34b01d1839) Media Sharing Server -------------------------------------------------------------------------------- Update Information: Update version to 0.3.45 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Wim Taymans <wtaymans(a)redhat.com> - 0.3.45-1 - Update version to 0.3.45 -------------------------------------------------------------------------------- ================================================================================ pyshp-2.2.0-1.fc35 (FEDORA-2022-36ec5f4d3c) Pure Python read/write support for ESRI Shapefile format -------------------------------------------------------------------------------- Update Information: *VERSION 2.2.0* *2022-02-02* **New Features:** - Read shapefiles directly from zipfiles. - Read shapefiles directly from urls. - Allow fast extraction of only a subset of dbf fields through a `fields` arg. - Allow fast filtering which shapes to read from the file through a `bbox` arg. **Improvements:** - More examples and restructuring of README. - More informative Shape to geojson warnings. - Shape object information when calling repr(). - Faster ring orientation checks, enforce geojson output ring orientation. **Bug fixes:** - Remove null-padding at end of some record character fields. - Fix dbf writing error when the number of record list or dict entries didn't match the number of fields. - Handle rare garbage collection issue after deepcopy (https://github.com/mattijn/topojson/issues/120) - Fix bug where records and shapes would be assigned incorrect record number - Fix typos in docs -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 2.2.0-1 - Update to 2.2.0 (close RHBZ#2050074) * Thu Feb 3 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 2.1.3-7 - Remove a stray line from the description -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050074 - pyshp-2.2.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2050074 -------------------------------------------------------------------------------- ================================================================================ python-copr-1.115-1.fc35 (FEDORA-2022-103e6db92c) Python interface for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.115-1 - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 -------------------------------------------------------------------------------- ================================================================================ python-copr-common-0.14-1.fc35 (FEDORA-2022-103e6db92c) Python code used by Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.14-1 - Fixing copr-common version * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.13.2.dev-1 - dist-git: python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ python-imbalanced-learn-0.9.0-2.fc35 (FEDORA-2022-7802fc22f2) A Python Package to Tackle the Imbalanced Datasets in Machine Learning -------------------------------------------------------------------------------- Update Information: Patched version -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Iztok Fister Jr. <iztokf AT fedoraproject DOT org> - 0.9.0-2 - Patch sklearn version in order to work on F35 -------------------------------------------------------------------------------- ================================================================================ python-lazyarray-0.5.2-1.fc35 (FEDORA-2022-206d1a8466) A lazily-evaluated numerical array class -------------------------------------------------------------------------------- Update Information: Update to latest release v0.5.2 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Vanessa_kris <vanessaigwe1(a)gmail.com> 0.5.2-1 - update to latest release v0.5.2 * Wed Feb 2 2022 Vanessa_kris <vanessaigwe1(a)gmail.com> 0.5.1-3 - removed all patches * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.5.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2044540 - python-lazyarray-0.5.2 is available https://bugzilla.redhat.com/show_bug.cgi?id=2044540 -------------------------------------------------------------------------------- ================================================================================ python-mapbox-earcut-1.0.0-1.fc35 (FEDORA-2022-6cd25da316) Python bindings to the mapbox earcut C++ library -------------------------------------------------------------------------------- Update Information: Initial package -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 1.0.0-1 - Initial package (close RHBZ#2018705) -------------------------------------------------------------------------------- References: [ 1 ] Bug #2018705 - Review Request: python-mapbox-earcut - Python bindings to the mapbox earcut C++ library https://bugzilla.redhat.com/show_bug.cgi?id=2018705 -------------------------------------------------------------------------------- ================================================================================ python-networkmanager-2.2-5.fc35 (FEDORA-2022-b380e1bff1) Easy communication with NetworkManager -------------------------------------------------------------------------------- Update Information: Backported patch to allow runing without main loop. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Vitaly Zaitsev <vitaly(a)easycoding.org> - 2.2-5 - Backported patch to allow runing without main loop (RHBZ#1972165). - Converted SPEC to 202x-era guidelines. * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #1972165 - python-networkmanager examples does not work https://bugzilla.redhat.com/show_bug.cgi?id=1972165 -------------------------------------------------------------------------------- ================================================================================ python-uranium-4.13.1-1.fc35 (FEDORA-2022-b32cb71cc2) A Python framework for building desktop applications -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Fri Jan 21 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ rpi-imager-1.7-1.fc35 (FEDORA-2022-d02260d433) Graphical user-interface to write disk images and format SD cards -------------------------------------------------------------------------------- Update Information: New upstream release -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 K. de Jong <keesdejong(a)fedoraproject.org> - 1.7-1 - New upstream release * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.6.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Sep 14 2021 Sahana Prasad <sahana(a)redhat.com> - 1.6.2-3 - Rebuilt with OpenSSL 3.0.0 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050352 - New upstream version released (1.7) https://bugzilla.redhat.com/show_bug.cgi?id=2050352 -------------------------------------------------------------------------------- ================================================================================ rpkg-util-3.2-1.fc35 (FEDORA-2022-d164fbf2d2) RPM packaging utility -------------------------------------------------------------------------------- Update Information: - fix #39: .spec.rpkg$ files have (always) precendence over .spec$ files. Before the order was undefined in v3. ---- - lookaside: define %%(ns<N>) and %%(name)s - lookaside: fix undefined DownloadError traceback - require python3-setuptools explicitly -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 clime <clime(a)fedoraproject.org> 3.2-1 - fix #39: .spec.rpkg$ have (always) precendence over .spec$ files * Fri Jan 28 2022 clime <clime(a)fedoraproject.org> 3.1-1 - lookaside: define %(ns<N>) and %(name)s - lookaside: fix undefined DownloadError traceback - require python3-setuptools explicitly -------------------------------------------------------------------------------- ================================================================================ rust-clap-3.0.14-1.fc35 (FEDORA-2022-b91d50b7c4) Simple to use, efficient, and full-featured Command Line Argument Parser -------------------------------------------------------------------------------- Update Information: Update the clap and clap_derive crates to version 3.0.14. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 3.0.14-1 - Update to version 3.0.14; Fixes RHBZ#2044532 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 3.0.10-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-clap_derive-3.0.14-1.fc35 (FEDORA-2022-b91d50b7c4) Parse command line argument by defining a struct, derive crate -------------------------------------------------------------------------------- Update Information: Update the clap and clap_derive crates to version 3.0.14. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 3.0.14-1 - Update to version 3.0.14; Fixes RHBZ#2044531 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 3.0.6-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-1.0.64-1.fc35 (FEDORA-2022-0754c8700b) Safe interop between Rust and C++ -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048312 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-build-1.0.64-1.fc35 (FEDORA-2022-0754c8700b) C++ code generator for integrating cxx crate into a Cargo build -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048313 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-gen-0.7.64-1.fc35 (FEDORA-2022-0754c8700b) C++ code generator for integrating cxx crate into higher level tools -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 0.7.64-1 - Update to version 0.7.64; Fixes RHBZ#2048316 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.7.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxxbridge-flags-1.0.64-1.fc35 (FEDORA-2022-0754c8700b) Compiler configuration of the cxx crate -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048314 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxxbridge-macro-1.0.64-1.fc35 (FEDORA-2022-0754c8700b) Implementation detail of the cxx crate -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048315 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-mac_address-1.1.3-1.fc35 (FEDORA-2022-ad14091629) Cross-platform retrieval of a network interface MAC address -------------------------------------------------------------------------------- Update Information: Initial package -------------------------------------------------------------------------------- ChangeLog: * Thu Jan 27 2022 Jan Macku <jamacku(a)redhat.com> 1.1.3-1 - 1.1.3 * Thu Jan 27 2022 Jan Macku <jamacku(a)redhat.com> 1.1.2-2 - Initial import - patch Cargo.toml * Thu Jan 27 2022 Jan Macku <jamacku(a)redhat.com> 1.1.2-1 - Initial import (fedora#2045056) -------------------------------------------------------------------------------- ================================================================================ rust-mint-0.5.9-1.fc35 (FEDORA-2022-e07d713fbb) Math interoperability standard types -------------------------------------------------------------------------------- Update Information: Update to version 0.5.9. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 0.5.9-1 - Update to version 0.5.9; Fixes RHBZ#2049908 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.5.8-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-piston-graphics_api_version-1.0.1-1.fc35 (FEDORA-2022-a5b7268390) Library for storing graphics API versions -------------------------------------------------------------------------------- Update Information: Initial import; Fixes RHBZ#1982907 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 R��mi Lauzier <remilauzier(a)protonmail.com> 1.0.1-1 - Initial import; Fixes RHBZ#1982907 -------------------------------------------------------------------------------- References: [ 1 ] Bug #1982907 - Review Request: rust-piston-graphics_api_version - A library for storing graphics API versions https://bugzilla.redhat.com/show_bug.cgi?id=1982907 -------------------------------------------------------------------------------- ================================================================================ rust-pretty_assertions-1.1.0-1.fc35 (FEDORA-2022-1ef2bbde55) Overwrite assert_eq! and assert_ne! with colorful replacements -------------------------------------------------------------------------------- Update Information: Update to version 1.1.0. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.1.0-1 - Update to version 1.1.0; Fixes RHBZ#2049049 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-retry-1.3.1-1.fc35 (FEDORA-2022-f840429841) Utilities for retrying operations that can fail -------------------------------------------------------------------------------- Update Information: Update to version 1.3.1. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.3.1-1 - Update to version 1.3.1; Fixes RHBZ#2049419 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.3.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-serde-1.0.136-1.fc35 (FEDORA-2022-444865f3c7) Generic serialization/deserialization framework -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043972 -------------------------------------------------------------------------------- ================================================================================ rust-serde_derive-1.0.136-1.fc35 (FEDORA-2022-444865f3c7) Macros 1.1 implementation of #[derive(Serialize, Deserialize)] -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043973 -------------------------------------------------------------------------------- ================================================================================ rust-serde_test-1.0.136-1.fc35 (FEDORA-2022-444865f3c7) Token De/Serializer for testing De/Serialize implementations -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043974 -------------------------------------------------------------------------------- ================================================================================ tellico-3.4.3-1.fc35 (FEDORA-2022-b30d378df6) A collection manager -------------------------------------------------------------------------------- Update Information: Update to the latest stable release. The main changes since the last release are: * Fixed bug with opening target=_blank links; * Fixed crashing bug in audio file importer; * The kinopoisk.ru data source was updated; * The `Album` template was improved to account for possible changes in the `Tracks` field. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 3.4.3-1 - Update to 3.4.3 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.4.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 Kevin Fenzi <kevin(a)scrye.com> - 3.4.2-3 - Rebuild for hiredis 1.0.2 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2036522 - tellico-3.4.3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2036522 -------------------------------------------------------------------------------- ================================================================================ udiskie-2.4.1-1.fc35 (FEDORA-2022-5063e0f67e) Removable disk auto-mounter -------------------------------------------------------------------------------- Update Information: Update to version 2.4.1. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jan Stan��k <jstanek(a)redhat.com> 2.4.1-1 - Update to version 2.4.1 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 2.4.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049752 - udiskie-2.4.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049752 -------------------------------------------------------------------------------- ================================================================================ vdr-epgsearch-2.4.2-0.1.20220201git76d2b10.fc35 (FEDORA-2022-575c8ad28f) Powerful schedules menu replacement plugin for VDR -------------------------------------------------------------------------------- Update Information: - Update for new git snapshot - Rebuilt for new VDR API version -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 2.4.2-0.1.20220201git76d2b10 - Update for new git snapshot - Rebuilt for new VDR API version * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.4.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Dec 30 2021 Martin Gansser <martinkg(a)fedoraproject.org> - 2.4.1-4 - Rebuilt for new VDR API version -------------------------------------------------------------------------------- ================================================================================ vdr-live-3.1.5-1.fc35 (FEDORA-2022-06765275aa) An interactive web interface with HTML5 live stream support for VDR -------------------------------------------------------------------------------- Update Information: Update to 3.1.5-1 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 3.1.5-1 - Update to 3.1.5 * Sat Jan 29 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 3.1.4-0.4.20211228git0fbd9b3 - Add %undefine _package_note_flags to vdr main package - rebuild for rawhide * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.4-0.3.20211228git0fbd9b3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ xen-4.15.2-1.fc35 (FEDORA-2022-f1e36d49d4) Xen is a virtual machine monitor -------------------------------------------------------------------------------- Update Information: update to xen-4.15.2 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Michael Young <m.a.young(a)durham.ac.uk> - 4.15.2-1 - update to xen-4.15.2 remove or adjust patches now included or superceded upstream -------------------------------------------------------------------------------- ================================================================================ xstream-1.4.19-1.fc35 (FEDORA-2022-983a78275c) Java XML serialization library -------------------------------------------------------------------------------- Update Information: * New upstream release 1.4.19 * Security: Fix for CVE-2021-43859 -------------------------------------------------------------------------------- ChangeLog: * Sat Jan 29 2022 Didik Supriadi <didiksupriadi41(a)fedoraproject.org> - 1.4.19-1 - New upstream release 1.4.19 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.4.18-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2048135 - xstream-1.4.19 is available https://bugzilla.redhat.com/show_bug.cgi?id=2048135 [ 2 ] Bug #2049784 - CVE-2021-43859 xstream: Injecting highly recursive collections or maps can cause a DoS [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2049784 --------------------------------------------------------------------------------

1 0

Fedora 34 updates-testing report
by updates＠fedoraproject.org 04 Feb '22

04 Feb '22

The following Fedora 34 Security updates need testing: Age URL 56 https://bodhi.fedoraproject.org/updates/FEDORA-2021-6bd024d2a7 podman-3.4.4-1.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-f7366e60cb webkit2gtk3-2.34.4-1.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-7018d21c6b mingw-python3-3.9.4-4.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-56f583fd79 mingw-qt5-qtsvg-5.15.2-6.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-eca9d3b7fa mingw-openexr-2.5.5-4.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-286134c3c1 mingw-binutils-2.34-11.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-448c3fe785 stratisd-2.4.4-2.fc34 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-fc643339ef expat-2.4.4-1.fc34 2 https://bodhi.fedoraproject.org/updates/FEDORA-2022-a42e97d8e8 php-laminas-form-2.17.1-1.fc34 2 https://bodhi.fedoraproject.org/updates/FEDORA-2022-43f11039b2 phoronix-test-suite-10.8.1-1.fc34 2 https://bodhi.fedoraproject.org/updates/FEDORA-2022-473560d1a6 lua-5.4.4-1.fc34 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-667a5c6e26 kernel-5.16.5-100.fc34 kernel-headers-5.16.5-100.fc34 kernel-tools-5.16.5-100.fc34 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-b706eef225 java-1.8.0-openjdk-1.8.0.322.b06-2.fc34 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-8761120127 rlwrap-0.45.2-1.fc34 The following Fedora 34 Critical Path updates have yet to be approved: Age URL 302 https://bodhi.fedoraproject.org/updates/FEDORA-2021-1300e131b6 ddpt-0.96-4.fc34 ledmon-0.95-4.fc34 libgpod-0.8.3-38.fc34 libzfcphbaapi-2.2.0-12.fc34 lsvpd-1.7.11-6.fc34 sg3_utils-1.46-1.fc34 udisks-1.0.5-18.fc34 63 https://bodhi.fedoraproject.org/updates/FEDORA-2021-c8f226c8be annobin-9.79-3.fc34 24 https://bodhi.fedoraproject.org/updates/FEDORA-2022-e3b891fe11 gdb-11.1-7.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-f7366e60cb webkit2gtk3-2.34.4-1.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-9f8d54ddbb python-setuptools-53.0.0-3.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-e48bc509f8 libwebp-1.2.2-1.fc34 mingw-libwebp-1.2.2-1.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-05c6de660c cups-2.3.3op2-13.fc34 13 https://bodhi.fedoraproject.org/updates/FEDORA-2022-9d93c1b550 tigervnc-1.12.0-4.fc34 11 https://bodhi.fedoraproject.org/updates/FEDORA-2022-2d699ed440 zstd-1.5.2-1.fc34 7 https://bodhi.fedoraproject.org/updates/FEDORA-2022-bd2db62cf2 bolt-0.9.2-1.fc34 7 https://bodhi.fedoraproject.org/updates/FEDORA-2022-63d4e00632 wpa_supplicant-2.10-2.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-27cd06feaa gcc-11.2.1-9.fc34 5 https://bodhi.fedoraproject.org/updates/FEDORA-2022-399e4025dd xorg-x11-server-1.20.14-3.fc34 3 https://bodhi.fedoraproject.org/updates/FEDORA-2022-fc643339ef expat-2.4.4-1.fc34 2 https://bodhi.fedoraproject.org/updates/FEDORA-2022-2b7b5c0de7 libxcrypt-4.4.28-1.fc34 2 https://bodhi.fedoraproject.org/updates/FEDORA-2022-473560d1a6 lua-5.4.4-1.fc34 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-35e911cda6 selinux-policy-34.25-1.fc34 1 https://bodhi.fedoraproject.org/updates/FEDORA-2022-667a5c6e26 kernel-5.16.5-100.fc34 kernel-headers-5.16.5-100.fc34 kernel-tools-5.16.5-100.fc34 The following builds have been pushed to Fedora 34 updates-testing CuraEngine-4.13.1-1.fc34 ansible-inventory-grapher-2.5.0-10.fc34 armadillo-10.8.2-1.fc34 containerd-1.5.9-1.fc34 copr-backend-1.153-1.fc34 copr-cli-1.98-1.fc34 copr-dist-git-0.52-1.fc34 copr-frontend-1.184-1.fc34 copr-keygen-1.82-1.fc34 copr-rpmbuild-0.55.2-1.fc34 cura-4.13.1-2.fc34 cura-fdm-materials-4.13.0-1.fc34 dotnet6.0-6.0.101-3.fc34 falkon-3.2.0-2.fc34 gh-2.5.0-1.fc34 gobuster-3.1.0-1.fc34 golang-github-distribution-3-2.8.0~beta.1-1.20220203gitb609265.fc34 golang-github-intel-goresctrl-0.2.0-3.fc34 golang-github-redis-7-7.4.1-1.fc34 golang-github-spf13-cast-1.4.1-1.fc34 golang-github-spf13-cobra-1.3.0-1.fc34 golang-github-ssdb-gossdb-0-0.1.20220203git88f6b59.fc34 golang-github-wendal-errors-0-0.1.20220203git7f31f4b.fc34 golang-github-wendal-goyaml2-2.0-1.fc34 hwdata-0.356-1.fc34 ipython-7.20.0-2.fc34 libarcus-4.13.1-1.fc34 libdxfrw-1.0.1-3.fc34 librecad-2.2.0-0.13.rc3.fc34 libsavitar-4.13.1-1.fc34 libxo-1.6.0-1.fc34 lyx-2.3.6.1-5.fc34 mingw-expat-2.4.4-1.fc34 mingw-gdk-pixbuf-2.42.6-4.fc34 mkvtoolnix-64.0.0-1.fc34 perl-Geo-IPfree-1.160.000-1.fc34 php-nyholm-psr7-1.5.0-1.fc34 pyshp-2.2.0-1.fc34 python-copr-1.115-1.fc34 python-copr-common-0.14-1.fc34 python-lazyarray-0.5.2-1.fc34 python-mapbox-earcut-1.0.0-1.fc34 python-networkmanager-2.2-5.fc34 python-uranium-4.13.1-1.fc34 qt5-qtwayland-5.15.2-19.fc34 rpi-imager-1.7-1.fc34 rust-clap-3.0.14-1.fc34 rust-clap_derive-3.0.14-1.fc34 rust-cxx-1.0.64-1.fc34 rust-cxx-build-1.0.64-1.fc34 rust-cxx-gen-0.7.64-1.fc34 rust-cxxbridge-flags-1.0.64-1.fc34 rust-cxxbridge-macro-1.0.64-1.fc34 rust-mint-0.5.9-1.fc34 rust-piston-graphics_api_version-1.0.1-1.fc34 rust-pretty_assertions-1.1.0-1.fc34 rust-retry-1.3.1-1.fc34 rust-serde-1.0.136-1.fc34 rust-serde_derive-1.0.136-1.fc34 rust-serde_test-1.0.136-1.fc34 tellico-3.4.3-1.fc34 udiskie-2.4.1-1.fc34 vdr-epgsearch-2.4.2-0.1.20220201git76d2b10.fc34 vdr-live-3.1.5-1.fc34 xen-4.14.4-1.fc34 xstream-1.4.19-1.fc34 Details about builds: ================================================================================ CuraEngine-4.13.1-1.fc34 (FEDORA-2022-252d889047) Engine for processing 3D models into G-code instructions for 3D printers -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-1 - Update to 4.13.1 * Wed Jan 19 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.0-1 - Update to 4.13.0 * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:4.12.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-4 - Update to 4.12.1 * Sat Nov 6 2021 Adrian Reber <adrian(a)lisas.de> - 1:4.11.0-4 - Rebuilt for protobuf 3.19.0 * Mon Oct 25 2021 Adrian Reber <adrian(a)lisas.de> - 1:4.11.0-3 - Rebuilt for protobuf 3.18.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ ansible-inventory-grapher-2.5.0-10.fc34 (FEDORA-2022-05153def6a) Creates graphs representing ansible inventory -------------------------------------------------------------------------------- Update Information: Allow users to choose between ansible and ansible-core. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Maxwell G <gotmax(a)e.email> - 2.5.0-10 - Allow users to choose between ansible and ansible-core. - Make compliant with SourceURL Guidelines. * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.5.0-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 Parag Nemade <pnemade AT redhat DOT com> - 2.5.0-8 - Resolves:rhbz#2040942 - Change package requirement from ansible-python3 to ansible * Wed Jul 21 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.5.0-7 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Fri Jun 4 2021 Python Maint <python-maint(a)redhat.com> - 2.5.0-6 - Rebuilt for Python 3.10 -------------------------------------------------------------------------------- ================================================================================ armadillo-10.8.2-1.fc34 (FEDORA-2022-e7b8bb4d12) Fast C++ matrix library with syntax similar to MATLAB and Octave -------------------------------------------------------------------------------- Update Information: Update to the latest stable release. The main changes are: * faster handling of symmetric matrices by `pinv()` and `rank()`; * faster handling of diagonal matrices by `inv_sympd()`, `pinv()`, `rank()`; * expanded `norm()` to handle integer vectors and matrices; * added `datum::tau` to replace 2��. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 10.8.2-1 - update to 10.8.2 * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 10.7.4-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2033182 - armadillo-10.8.2 is available https://bugzilla.redhat.com/show_bug.cgi?id=2033182 -------------------------------------------------------------------------------- ================================================================================ containerd-1.5.9-1.fc34 (FEDORA-2022-2aa546d314) Open and reliable container runtime -------------------------------------------------------------------------------- Update Information: Update to 1.5.9. Fixes FTBFS. Closes rhbz#2045277. Mitigates CVE-2021-43816. Closes rhbz#2044434. Closes rhbz#2044436. Temporarily build using vendored dependencies. -------------------------------------------------------------------------------- ChangeLog: * Mon Jan 31 2022 Maxwell G <gotmax(a)e.email> - 1.5.9-1 - Update to 1.5.9. Fixes FTBFS. Closes rhbz#2045277. - Mitigates CVE-2021-43816. Closes rhbz#2044434. Closes rhbz#2044436. - Temporarily build using vendored dependencies. * Wed Jan 19 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.5.8-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2044434 - CVE-2021-43816 containerd: Unprivileged pod may bind mount any privileged regular file on disk https://bugzilla.redhat.com/show_bug.cgi?id=2044434 -------------------------------------------------------------------------------- ================================================================================ copr-backend-1.153-1.fc34 (FEDORA-2022-b1f6928408) Backend for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.153-1 - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ copr-cli-1.98-1.fc34 (FEDORA-2022-b1f6928408) Command line interface for COPR -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.98-1 - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ================================================================================ copr-dist-git-0.52-1.fc34 (FEDORA-2022-b1f6928408) Copr services for Dist Git server -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.52-1 - dist-git: python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ copr-frontend-1.184-1.fc34 (FEDORA-2022-b1f6928408) Frontend for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.184-1 - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ================================================================================ copr-keygen-1.82-1.fc34 (FEDORA-2022-b1f6928408) Part of Copr build system. Aux service that generate keys for signd -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.82-1 - Disable coverage analysis during RPM build -------------------------------------------------------------------------------- ================================================================================ copr-rpmbuild-0.55.2-1.fc34 (FEDORA-2022-b1f6928408) Run COPR build tasks -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.55.2-1 - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place -------------------------------------------------------------------------------- ================================================================================ cura-4.13.1-2.fc34 (FEDORA-2022-252d889047) 3D printer / slicing GUI -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-2 - Fix error loading SentryLogger plugin * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:4.12.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Sun Jan 2 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-2 - Backport fix for Python 3.10 * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 1:4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ cura-fdm-materials-4.13.0-1.fc34 (FEDORA-2022-252d889047) Cura FDM Material database -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ dotnet6.0-6.0.101-3.fc34 (FEDORA-2022-6149489d85) .NET Runtime and SDK -------------------------------------------------------------------------------- Update Information: This is the December update for .NET 6.0 This updates .NET 6 to SDK 6.0.101 and Runtime 6.0.1 -------------------------------------------------------------------------------- ChangeLog: * Fri Jan 28 2022 Omair Majid <omajid(a)redhat.com> - 6.0.101-3 - Update to .NET SDK 6.0.101 and Runtime 6.0.1 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 6.0.100-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ falkon-3.2.0-2.fc34 (FEDORA-2022-fbe9d37bfb) Modern web browser -------------------------------------------------------------------------------- Update Information: An update of Falkon to the latest upstream release, version 3.2.0. This update adds support for screen sharing and includes several small improvements and bug fixes: * Add support for Screen Capture (Qt 5.13.2+) * Option for internal PDFium-based viewer (Qt 5.13+) * CookieManager: Add support for selecting more than one cookie at once * Correct the sorting for cookies white- and black- lists * Speeddial: decode initialScript data as Utf8 * Set current tab as parent for duplicated tab * add support for detaching tabs via context menu (BUG 443947, !22 from Fran Rogers) * BookmarksManager: Don't allow to create bookmark without parent * Remove the padding of the bookmark bar * Added context menu item to bookmarks toolbar for creating folder * Preferences: Add links to KDE store for installing themes/extensions * OcsSupport: Add initial support for downloading themes/extensions * Add filter to preferences extensions page * SideBarManager: Clear active sidebar upon close * Added focus for searchbar in history sidebar & bookmark sidebar * SearchToolBar: Remove warning message that no results were found * SearchBar - Show number of matches found on page search * added pause/resume for downloads * Prompt user when KWallet is disabled * KDEFrameworksIntegration: Create Purpose menu in init * GreaseMonkey: Fix detecting *.user.js urls * Added QLoggingCategory to Falkon * Handle web push notifications with Falkon notification system * Fix name and set desktop entry for notifications * NetworkManager: Fix QtWebEngine warning about registering schemes * Don't use subfolders for QML/Python extensions * ThemeManager: Implement removing locally installed themes * Plugins: Implement removing locally installed plugins * Plugins: Use embedded JSON metadata for shared library plugins * RunAction plugin: set alternatingRowColors for listWidget * VerticalTabs: Accept click event on tree collapse * VerticalTabs: Draw unloaded tabs with "Disabled" color palette * VerticalTabs: Add child tab with middle click on "New Tab" button * VerticalTabs: Correctly recognize tree collapse / expand button * VerticalTabs: Also override Ctrl+PgUp/PgDown shortcuts -------------------------------------------------------------------------------- ChangeLog: * Mon Jan 31 2022 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.0-2 - add optional Python plugin support (--with python) (#1749896) - keep it disabled by default though because of shiboken2 bug (#2048781) * Mon Jan 31 2022 Kevin Kofler <Kevin(a)tigcc.ticalc.org> - 3.2.0-1 - update to 3.2.0 (new upstream feature release), drop upstream patches - add BuildRequires: kf5-karchive-devel, dependency added upstream * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.0-11 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Sep 14 2021 Sahana Prasad <sahana(a)redhat.com> - 3.1.0-10 - Rebuilt with OpenSSL 3.0.0 * Wed Jul 21 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.0-9 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ gh-2.5.0-1.fc34 (FEDORA-2022-843e2a22ac) GitHub��s official command line tool -------------------------------------------------------------------------------- Update Information: Update to 2.5.0 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Mikel Olasagasti Uranga <mikel(a)olasagasti.info> 2.5.0-1 - Update to 2.5.0 * Sat Jan 29 2022 Maxwell G <gotmax(a)e.email> 2.4.0-7 - Fix ldflags and rebuild for new go-rpm-macros. * Tue Jan 25 2022 Mikel Olasagasti Uranga <mikel(a)olasagasti.info> 2.4.0-6 - Fix test that fails with golang-1.18 - Closes rhbz#2045415 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 2.4.0-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 sixg0000d <sixg0000d(a)gmail.com> 2.4.0-4 - Fix: generate correct shell completions -------------------------------------------------------------------------------- ================================================================================ gobuster-3.1.0-1.fc34 (FEDORA-2022-19da46c309) Directory/File, DNS and VHost busting tool written in Go -------------------------------------------------------------------------------- Update Information: Update to 3.1.0 Close: rhbz#2049159 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Sandipan Roy <saroy(a)redhat.com> 3.1.0-1 - Update to 3.1.0 Close: rhbz#2049159 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.0.1-6 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Jul 22 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.0.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049159 - gobuster-3.1.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049159 -------------------------------------------------------------------------------- ================================================================================ golang-github-distribution-3-2.8.0~beta.1-1.20220203gitb609265.fc34 (FEDORA-2022-57bd308e03) The toolkit to pack, ship, store, and deliver container content -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sat Jan 29 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 2.8.0~beta.1-1 - Uncommitted changes -------------------------------------------------------------------------------- ================================================================================ golang-github-intel-goresctrl-0.2.0-3.fc34 (FEDORA-2022-257bd4c9aa) Golang library for managing resctrl filesystem -------------------------------------------------------------------------------- Update Information: Disable binary expect on x86_64 -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0.2.0-2 - Uncommitted changes * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0.2.0-1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-redis-7-7.4.1-1.fc34 (FEDORA-2022-2b849ff7bf) Type-safe Redis client for Golang -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 7.4.1-1 - Uncommitted changes * Mon Aug 2 2021 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 7.4.0-1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-spf13-cast-1.4.1-1.fc34 (FEDORA-2022-d9c8213649) Safe and easy casting from one type to another in Go -------------------------------------------------------------------------------- Update Information: Update to 1.4.1 Close: rhbz#1986390 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 1.4.1-1 - Update to 1.4.1 Close: rhbz#1986390 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.3.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Jul 22 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.3.1-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #1986390 - golang-github-spf13-cast-1.4.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=1986390 -------------------------------------------------------------------------------- ================================================================================ golang-github-spf13-cobra-1.3.0-1.fc34 (FEDORA-2022-d0d335bfeb) Commander for modern Go CLI interactions -------------------------------------------------------------------------------- Update Information: Update to 1.3.0. Fixes rhbz#2033014. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Maxwell G <gotmax(a)e.email> 1.3.0-1 - Update to 1.3.0. Fixes rhbz#2033014. * Wed Feb 2 2022 Maxwell G <gotmax(a)e.email> 1.2.1-3 - Fix broken test and FTBFS (rhbz#2045615). Cleanup. * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.2.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2033014 - golang-github-spf13-cobra-1.3.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2033014 -------------------------------------------------------------------------------- ================================================================================ golang-github-ssdb-gossdb-0-0.1.20220203git88f6b59.fc34 (FEDORA-2022-d171ea3920) SSDB Golang client -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.2 - Uncommitted changes * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-wendal-errors-0-0.1.20220203git7f31f4b.fc34 (FEDORA-2022-d998f9c17f) Enhanced errors package -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: * Sun Jan 30 2022 Robert-Andr�� Mauchin <zebob.m(a)gmail.com> 0-0.1 - Initial release -------------------------------------------------------------------------------- ================================================================================ golang-github-wendal-goyaml2-2.0-1.fc34 (FEDORA-2022-26eb7c85c0) YAML for Golang -------------------------------------------------------------------------------- Update Information: Initial import -------------------------------------------------------------------------------- ChangeLog: -------------------------------------------------------------------------------- ================================================================================ hwdata-0.356-1.fc34 (FEDORA-2022-c62ebcc869) Hardware identification and configuration data -------------------------------------------------------------------------------- Update Information: Update pci and vendor ids -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Vitezslav Crhonek <vcrhonek(a)redhat.com> - 0.356-1 - Update pci and vendor ids -------------------------------------------------------------------------------- ================================================================================ ipython-7.20.0-2.fc34 (FEDORA-2022-b9e38f8a56) An enhanced interactive Python shell -------------------------------------------------------------------------------- Update Information: Fix CVE-2022-21699 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Lum��r Balhar <lbalhar(a)redhat.com> - 7.20.0-2 - Fix CVE-2022-21699 Resolves: rhbz#2047814 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2047814 - CVE-2022-21699 ipython: arbitrary code execution by cross user temporary files mismanagment [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2047814 -------------------------------------------------------------------------------- ================================================================================ libarcus-4.13.1-1.fc34 (FEDORA-2022-252d889047) Communication library between internal components for Ultimaker software -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 * Sat Nov 6 2021 Adrian Reber <adrian(a)lisas.de> - 4.11.0-3 - Rebuilt for protobuf 3.19.0 * Mon Oct 25 2021 Adrian Reber <adrian(a)lisas.de> - 4.11.0-2 - Rebuilt for protobuf 3.18.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ libdxfrw-1.0.1-3.fc34 (FEDORA-2022-08d7ee21f7) Library to read/write DXF files -------------------------------------------------------------------------------- Update Information: Update librecad to 2.2.0 rc3. Apply fixes to libdxfrw and librecad for CVE-2021-45341, CVE-2021-45342, CVE-2021-45343. This also resolves the issue where some dwg files no longer opened. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Tom Callaway <spot(a)fedoraproject.org> - 1.0.1-3 - apply fixes from upstream, including fix for CVE-2021-45343 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.0.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2027148 - librecad-2.2.0-rc3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2027148 [ 2 ] Bug #2031379 - [regression] .dwg file no longer opens https://bugzilla.redhat.com/show_bug.cgi?id=2031379 [ 3 ] Bug #2046248 - CVE-2021-45341 librecad: buffer overflow in CDataMoji of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046248 [ 4 ] Bug #2046252 - CVE-2021-45342 librecad: buffer overflow in CDataList of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046252 [ 5 ] Bug #2046256 - CVE-2021-45343 librecad: NULL pointer dereference in the HATCH handling of libdxfrw can lead to DoS via a crafted DXF document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046256 -------------------------------------------------------------------------------- ================================================================================ librecad-2.2.0-0.13.rc3.fc34 (FEDORA-2022-08d7ee21f7) Computer Assisted Design (CAD) Application -------------------------------------------------------------------------------- Update Information: Update librecad to 2.2.0 rc3. Apply fixes to libdxfrw and librecad for CVE-2021-45341, CVE-2021-45342, CVE-2021-45343. This also resolves the issue where some dwg files no longer opened. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Tom Callaway <spot(a)fedoraproject.org> - 2.2.0-0.13.rc3 - update to rc3 - apply upstream fix for CVE-2021-45342, CVE-2021-45341 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.2.0-0.12.rc2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2027148 - librecad-2.2.0-rc3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2027148 [ 2 ] Bug #2031379 - [regression] .dwg file no longer opens https://bugzilla.redhat.com/show_bug.cgi?id=2031379 [ 3 ] Bug #2046248 - CVE-2021-45341 librecad: buffer overflow in CDataMoji of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046248 [ 4 ] Bug #2046252 - CVE-2021-45342 librecad: buffer overflow in CDataList of the jwwlib component allows remote code execution via a crafted JWW document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046252 [ 5 ] Bug #2046256 - CVE-2021-45343 librecad: NULL pointer dereference in the HATCH handling of libdxfrw can lead to DoS via a crafted DXF document [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2046256 -------------------------------------------------------------------------------- ================================================================================ libsavitar-4.13.1-1.fc34 (FEDORA-2022-252d889047) C++ implementation of 3mf loading with SIP Python bindings -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Thu Jan 20 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ libxo-1.6.0-1.fc34 (FEDORA-2022-6a61e0d790) A Library for Generating Text, XML, JSON, and HTML Output -------------------------------------------------------------------------------- Update Information: New package libxo (https://github.com/Juniper/libxo) added for version 1.6.0 -------------------------------------------------------------------------------- ChangeLog: * Wed Aug 11 2021 Kanitha Chim <kchim(a)redhat.com> - 1.6.0-1 - Initial package -------------------------------------------------------------------------------- References: [ 1 ] Bug #2013814 - Review Request: libxo - A Library for Generating Text, XML, JSON, and HTML Output https://bugzilla.redhat.com/show_bug.cgi?id=2013814 -------------------------------------------------------------------------------- ================================================================================ lyx-2.3.6.1-5.fc34 (FEDORA-2022-8a47e23b4c) WYSIWYM (What You See Is What You Mean) document processor -------------------------------------------------------------------------------- Update Information: Fix bug when converting old layout files (fixes bz#1965118). -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 2.3.6.1-5 - fix #1965118 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.3.6.1-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Jul 22 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.3.6.1-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ mingw-expat-2.4.4-1.fc34 (FEDORA-2022-d2abd0858e) MinGW Windows port of expat XML parser library -------------------------------------------------------------------------------- Update Information: Update to 2.4.4, fixes CVE-2022-23990. -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Sandro Mani <manisandro(a)gmail.com> - 2.4.4-1 - Update to 2.4.4 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.4.3-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Jan 17 2022 Sandro Mani <manisandro(a)gmail.com> - 2.4.3-1 - Update to 2.4.3 * Thu Jul 22 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.4.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Fri Jun 4 2021 Sandro Mani <manisandro(a)gmail.com> - 2.4.1-1 - Update to 2.4.1 * Sat Apr 17 2021 Sandro Mani <manisandro(a)gmail.com> - 2.3.0-1 - Update to 2.3.0 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050214 - CVE-2022-23990 mingw-expat: expat: integer overflow in the doProlog function [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2050214 -------------------------------------------------------------------------------- ================================================================================ mingw-gdk-pixbuf-2.42.6-4.fc34 (FEDORA-2022-a16e5d72fc) MinGW Windows GDK Pixbuf library -------------------------------------------------------------------------------- Update Information: Backport patch for CVE-2021-44648. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Sandro Mani <manisandro(a)gmail.com> - 2.42.6-4 - Backport patch for CVE-2021-44648 * Thu Jan 20 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.42.6-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Jul 22 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.42.6-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Sat Apr 10 2021 Sandro Mani <manisandro(a)gmail.com> - 2.42.6-1 - Update to 2.42.6 * Thu Mar 25 2021 Sandro Mani <manisandro(a)gmail.com> - 2.42.4-1 - Update to 2.42.4 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049411 - CVE-2021-44648 mingw-gdk-pixbuf: gdk-pixbuf: heap-buffer overflow when decoding the lzw compressed stream of image data [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2049411 -------------------------------------------------------------------------------- ================================================================================ mkvtoolnix-64.0.0-1.fc34 (FEDORA-2022-f0f80b7cb8) Matroska container manipulation utilities -------------------------------------------------------------------------------- Update Information: # Version 64.0.0 "Willows" 2021-12-27 ## New features and enhancements * MKVToolNix GUI: language dialog: when the user switches between the two edit modes, the mode's corresponding first control is automatically focussed. ## Bug fixes * all: language lists: the entries for "Ancient Greek (to 1453)" and "Modern Greek (1453-)" have been renamed to "Greek (ancient, -1453)" and "Greek (modern, 1453-)" respectively in order to be easier to find. * mkvmerge: VobSub reader: files containing `id: --` lines to indicate that the track language isn't known were rejected by `mkvmerge`. Now they're accepted, and `und` (undetermined) is used as the language. Fixes #3246. * MKVToolNix GUI: chapter editor: the "Save to Matroska or WebM file" function was using the wrong standard file dialog (the "open file" one instead of "save"), leading to confusing button names. Fixes #3242. * MKVToolNix GUI: high DPI scaling: fixed the icons in the tool selector having the wrong size for scaling factors other than 100% or 200%. Fixes #3229. -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Dominik Mierzejewski <rpm(a)greysector.net> - 64.0.0-1 - update to 64.0.0 (#2035773) -------------------------------------------------------------------------------- References: [ 1 ] Bug #2035773 - mkvtoolnix-64.0.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2035773 -------------------------------------------------------------------------------- ================================================================================ perl-Geo-IPfree-1.160.000-1.fc34 (FEDORA-2022-a3d0a9fa80) Look up the country of an IPv4 Address -------------------------------------------------------------------------------- Update Information: This release adds a code for Kosovo. It also rempliments caching to free from a dependnecy on Memoize Perl module. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Petr Pisar <ppisar(a)redhat.com> - 1.160.000-1 - 1.160000 bump - Package the tests -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049731 - Upgrade perl-Geo-IPfree to 1.160000 https://bugzilla.redhat.com/show_bug.cgi?id=2049731 -------------------------------------------------------------------------------- ================================================================================ php-nyholm-psr7-1.5.0-1.fc34 (FEDORA-2022-b990436fdf) A fast PHP7 implementation of PSR-7 -------------------------------------------------------------------------------- Update Information: **Version 1.5.0** Added - Add explicit `@return mixed` - Add explicit return types to HttplugFactory Fixed - Improve error handling with streams -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Remi Collet <remi(a)remirepo.net> - 1.5.0-1 - update to 1.5.0 -------------------------------------------------------------------------------- ================================================================================ pyshp-2.2.0-1.fc34 (FEDORA-2022-a4103394aa) Pure Python read/write support for ESRI Shapefile format -------------------------------------------------------------------------------- Update Information: *VERSION 2.2.0* *2022-02-02* **New Features:** - Read shapefiles directly from zipfiles. - Read shapefiles directly from urls. - Allow fast extraction of only a subset of dbf fields through a `fields` arg. - Allow fast filtering which shapes to read from the file through a `bbox` arg. **Improvements:** - More examples and restructuring of README. - More informative Shape to geojson warnings. - Shape object information when calling repr(). - Faster ring orientation checks, enforce geojson output ring orientation. **Bug fixes:** - Remove null-padding at end of some record character fields. - Fix dbf writing error when the number of record list or dict entries didn't match the number of fields. - Handle rare garbage collection issue after deepcopy (https://github.com/mattijn/topojson/issues/120) - Fix bug where records and shapes would be assigned incorrect record number - Fix typos in docs -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 2.2.0-1 - Update to 2.2.0 (close RHBZ#2050074) * Thu Feb 3 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 2.1.3-5 - Remove a stray line from the description -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050074 - pyshp-2.2.0 is available https://bugzilla.redhat.com/show_bug.cgi?id=2050074 -------------------------------------------------------------------------------- ================================================================================ python-copr-1.115-1.fc34 (FEDORA-2022-b1f6928408) Python interface for Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 1.115-1 - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 -------------------------------------------------------------------------------- ================================================================================ python-copr-common-0.14-1.fc34 (FEDORA-2022-b1f6928408) Python code used by Copr -------------------------------------------------------------------------------- Update Information: copr-keygen - Disable coverage analysis during RPM build copr-backend - less aggressive final_prunerepo setting - analyze-results: dump data for projects' chroots - basic build tagging - better "regenerate repo" instructions - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - python code for removing unused tarballs on dist-git server copr- frontend - sort chroot-histogram graphs by number of builds - use dist-git method for builds by default - fix size of graphs on status page - limit max number of packages per request - paginate packages list in APIv3 - don't query all packages when empty list is specified - webhook rebuilds are background jobs now - re-enabled chroots should reset final_prunerepo_done - fix import order reported by pylint - print human-readable validation errors in APIv3 - basic build tagging - use new Fedora chroot icon - use official EPEL log for chroot icon - PyLint fixes for create_db.py - fix ./run_tests.sh script for coverage args - don't insert+commit in create_after event - build PyPI only for python3 by default - describe advanced searching possibilities - limit RubyGems and PyPI package names length - Disable coverage analysis during RPM build - 2029379 - workaround GitHub caching proxy - drop duplicit "group" table join - add "My Projects" button to the homepage - api monitor page to contain pkg_version copr-rpmbuild - don't depend on autospec in EL9 - use config file in *-cancel and *-log scripts - better PID for copr-rpmbuild-log - keep the required common version on one place python-copr - don't BuildRequires pyproject-rpm-macros directly - fix exception caused by default msg value - raise user-friendly exception when on request timeout - print human-readable validation errors in APIv3 - remove macros that reference old Fedoras and EL6 and instroduce EL9 copr-dist-git - python code for removing unused tarballs on dist-git server copr-cli - don't traceback for missing field in frontend's output - paginate packages list in APIv3 - fix exit code when a build is canceled - api monitor page to contain pkg_version -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.14-1 - Fixing copr-common version * Wed Feb 2 2022 Silvie Chlupova <schlupov(a)redhat.com> 0.13.2.dev-1 - dist-git: python code for removing unused tarballs on dist-git server -------------------------------------------------------------------------------- ================================================================================ python-lazyarray-0.5.2-1.fc34 (FEDORA-2022-c763ec0971) A lazily-evaluated numerical array class -------------------------------------------------------------------------------- Update Information: Update to latest release v0.5.2 -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Vanessa_kris <vanessaigwe1(a)gmail.com> 0.5.2-1 - update to latest release v0.5.2 * Wed Feb 2 2022 Vanessa_kris <vanessaigwe1(a)gmail.com> 0.5.1-3 - removed all patches * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.5.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2044540 - python-lazyarray-0.5.2 is available https://bugzilla.redhat.com/show_bug.cgi?id=2044540 -------------------------------------------------------------------------------- ================================================================================ python-mapbox-earcut-1.0.0-1.fc34 (FEDORA-2022-12ca3ade13) Python bindings to the mapbox earcut C++ library -------------------------------------------------------------------------------- Update Information: Initial package -------------------------------------------------------------------------------- ChangeLog: * Wed Feb 2 2022 Benjamin A. Beasley <code(a)musicinmybrain.net> 1.0.0-1 - Initial package (close RHBZ#2018705) -------------------------------------------------------------------------------- References: [ 1 ] Bug #2018705 - Review Request: python-mapbox-earcut - Python bindings to the mapbox earcut C++ library https://bugzilla.redhat.com/show_bug.cgi?id=2018705 -------------------------------------------------------------------------------- ================================================================================ python-networkmanager-2.2-5.fc34 (FEDORA-2022-89c76c9db1) Easy communication with NetworkManager -------------------------------------------------------------------------------- Update Information: Backported patch to allow runing without main loop. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Vitaly Zaitsev <vitaly(a)easycoding.org> - 2.2-5 - Backported patch to allow runing without main loop (RHBZ#1972165). - Converted SPEC to 202x-era guidelines. * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Fri Jul 23 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.2-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild * Fri Jun 4 2021 Python Maint <python-maint(a)redhat.com> - 2.2-2 - Rebuilt for Python 3.10 -------------------------------------------------------------------------------- References: [ 1 ] Bug #1972165 - python-networkmanager examples does not work https://bugzilla.redhat.com/show_bug.cgi?id=1972165 -------------------------------------------------------------------------------- ================================================================================ python-uranium-4.13.1-1.fc34 (FEDORA-2022-252d889047) A Python framework for building desktop applications -------------------------------------------------------------------------------- Update Information: ## Cura 4.13 _For an overview of the new features in Cura 4.13, please watch [our video](https://youtu.be/chvAuI6Eqto)._ **Sync material profiles** With Ultimaker Cura 4.13, we give you access to a seamless material experience for Ultimaker Material Alliance materials �� with the ease of use you��ve come to expect from Ultimaker materials. You can easily synchronize your Material Alliance profiles with your S-line Ultimaker hardware, at the click of a button. **New print profile** A new print profile with 0.3mm layer height for PLA Tough PLA, PVA and BAM for Ultimaker S-line printers **3MF thumbnail** Show the model in the thumbnail of a .3mf file, contributed by fieldOfView **Infill density** When printing with a 100% infill the infill pattern will change to ZigZag for all Ultimaker print profiles **User login authentication** We��ve streamlined the user login authentication by removing any restrictions, especially for strict enterprise-level IT requirements. **Other new features and improvements:** * Improved TPU: top layers have large bridge distance * Add warning icon to show which extruder is causing the configuration to be 'Not Supported', contributed by fieldOfView * Show what's new pages with every Cura build * Speed up loading of settings list * Re-use vertex buffer objects in rendering * Add Build Volume Temperature value to ChangeAtZ, contributed by legend069 * Allow plugins to have multiple views, contributed by Tyronnosaurus * Reduced top/bottom speed for TPU * Increased lined width for 0.3mm layer height profiles * Improved logging to allow debugging in early start-up process **Bug fixes:** * Fixed a bug with surface mode will not print all layers * Fixed a bug where maximum retraction could cause a crash * Reduced flow for 100% density parts * Fixed a bug in Surface Mode where small line- segments were created * Changed the Russian translation for 'nozzle', contributed by mlapkin * Fixed a visualization bug where layer lines were rendered in weird directions * Fixed a crash when receiving incomplete cloud API responses * Add SET_RPATH option to CMake, contributed by boomanaiden154 * Fixed initial layer bed and print head temperature for Snapmaker profile, contributed by prueker * Fixed shader compilation on some GPUs, contributed by fieldOfView * Fixed a bug where Cross 3D infill pattern vertical angles varies wildly * Bridge Skin Density can be set above 100% * Fixed tiny travel moves when monotonic ordering was enabled * Fix crash when using 'Select face to align to the build plate', contributed by eliadevito * Fixed a bug in fuzzy skin where sometimes it produced weird long overshoots, contributed by BagelOrb * Fixed undo and redo for support blockers * Fixed a bug where the Native CAD plugin wouldn't loading * Fixed a bug where the camera view toggle was not visible * Fixed some German translations, contributed by Sekisback * Fixed the link of the beta update message * Fixed a crash due to extruder being out of range * Fixed a bug where a disabled extruder was used * Fixed a bug where the aborted state was not reflected correctly in Monitor view * Fixed a bug in Pause at Height where it stops extruding * Fixed a bug where support blockers were included in the bounding box after loading a project file * Fixed a bug where grouped models become unslicable if the first extruder was disabled * Fixed a bug in Tree Support where the Z Distance was too big * Prevented QT plug-ins from being loaded from an insecure directory if an environment variable is set **Printer definitions, profiles and materials:** * Add Eazao Zero printer definition, contributed by Hogan-Polaris * Add XYZprinting printer definitions, contributed by heed818 ## Cura 4.13.1 This is a patch release fixing two important bugs. **Bug fixes:** * Fixed a bug where tree support could go through the model * Fixed a bug where there were incomplete layers in surface mode ---- Cura 4.12.1 -------------------------------------------------------------------------------- ChangeLog: * Tue Feb 1 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.1-1 - Update to 4.13.1 * Fri Jan 21 2022 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.13.0-1 - Update to 4.13.0 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.12.1-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Mon Dec 13 2021 Gabriel F��ron <feron.gabriel(a)gmail.com> - 4.12.1-1 - Update to 4.12.1 * Mon Nov 8 2021 Miro Hron��ok <mhroncok(a)redhat.com> - 4.11.0-2 - Round coordinates on getFaceIdAtPosition, to fix crash with Python 3.10+ - Fixes a crash when using "Select face to align to the build plate" tool - Fixes rhbz#2021157 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2021603 - libsavitar-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2021603 [ 2 ] Bug #2036371 - Please build cura 4.12.1 for Fedora https://bugzilla.redhat.com/show_bug.cgi?id=2036371 [ 3 ] Bug #2039367 - cura-4.13.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2039367 -------------------------------------------------------------------------------- ================================================================================ qt5-qtwayland-5.15.2-19.fc34 (FEDORA-2022-b8782ad7f2) Qt5 - Wayland platform support and QtCompositor module -------------------------------------------------------------------------------- Update Information: Fix crash on Plasma startup. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jan Grulich <jgrulich(a)redhat.com> - 5.15.2-19 - Disable some upstream patches causing a crash on Wayland sessions bz#2049560 * Mon Jan 31 2022 Jan Grulich <jgrulich(a)redhat.com> - 5.15.2-18 - Include potential upstream fix for Plasma panel freezes -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049560 - QT-QTWayland update 5.15.2-17.fc34 Login Fails - Blank Screen https://bugzilla.redhat.com/show_bug.cgi?id=2049560 -------------------------------------------------------------------------------- ================================================================================ rpi-imager-1.7-1.fc34 (FEDORA-2022-6220289170) Graphical user-interface to write disk images and format SD cards -------------------------------------------------------------------------------- Update Information: New upstream release -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 K. de Jong <keesdejong(a)fedoraproject.org> - 1.7-1 - New upstream release * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.6.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Sep 14 2021 Sahana Prasad <sahana(a)redhat.com> - 1.6.2-3 - Rebuilt with OpenSSL 3.0.0 * Fri Jul 23 2021 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.6.2-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_35_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2050352 - New upstream version released (1.7) https://bugzilla.redhat.com/show_bug.cgi?id=2050352 -------------------------------------------------------------------------------- ================================================================================ rust-clap-3.0.14-1.fc34 (FEDORA-2022-5abdaa4f36) Simple to use, efficient, and full-featured Command Line Argument Parser -------------------------------------------------------------------------------- Update Information: Update the clap and clap_derive crates to version 3.0.14. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 3.0.14-1 - Update to version 3.0.14; Fixes RHBZ#2044532 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 3.0.10-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-clap_derive-3.0.14-1.fc34 (FEDORA-2022-5abdaa4f36) Parse command line argument by defining a struct, derive crate -------------------------------------------------------------------------------- Update Information: Update the clap and clap_derive crates to version 3.0.14. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 3.0.14-1 - Update to version 3.0.14; Fixes RHBZ#2044531 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 3.0.6-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-1.0.64-1.fc34 (FEDORA-2022-04e82c8af4) Safe interop between Rust and C++ -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048312 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-build-1.0.64-1.fc34 (FEDORA-2022-04e82c8af4) C++ code generator for integrating cxx crate into a Cargo build -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048313 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxx-gen-0.7.64-1.fc34 (FEDORA-2022-04e82c8af4) C++ code generator for integrating cxx crate into higher level tools -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 0.7.64-1 - Update to version 0.7.64; Fixes RHBZ#2048316 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.7.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxxbridge-flags-1.0.64-1.fc34 (FEDORA-2022-04e82c8af4) Compiler configuration of the cxx crate -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048314 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-cxxbridge-macro-1.0.64-1.fc34 (FEDORA-2022-04e82c8af4) Implementation detail of the cxx crate -------------------------------------------------------------------------------- Update Information: - Update the cxx, cxxbridge-macro, cxxbridge-flags, cxx-build crates to version 1.0.64. - Update the cxx-gen crate to version 0.7.64. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.64-1 - Update to version 1.0.64; Fixes RHBZ#2048315 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.63-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-mint-0.5.9-1.fc34 (FEDORA-2022-d7c326ae7d) Math interoperability standard types -------------------------------------------------------------------------------- Update Information: Update to version 0.5.9. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 0.5.9-1 - Update to version 0.5.9; Fixes RHBZ#2049908 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 0.5.8-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-piston-graphics_api_version-1.0.1-1.fc34 (FEDORA-2022-a9b767b74c) Library for storing graphics API versions -------------------------------------------------------------------------------- Update Information: Initial import; Fixes RHBZ#1982907 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 R��mi Lauzier <remilauzier(a)protonmail.com> 1.0.1-1 - Initial import; Fixes RHBZ#1982907 -------------------------------------------------------------------------------- References: [ 1 ] Bug #1982907 - Review Request: rust-piston-graphics_api_version - A library for storing graphics API versions https://bugzilla.redhat.com/show_bug.cgi?id=1982907 -------------------------------------------------------------------------------- ================================================================================ rust-pretty_assertions-1.1.0-1.fc34 (FEDORA-2022-05488911f9) Overwrite assert_eq! and assert_ne! with colorful replacements -------------------------------------------------------------------------------- Update Information: Update to version 1.1.0. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.1.0-1 - Update to version 1.1.0; Fixes RHBZ#2049049 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.0.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-retry-1.3.1-1.fc34 (FEDORA-2022-8adf890fa3) Utilities for retrying operations that can fail -------------------------------------------------------------------------------- Update Information: Update to version 1.3.1. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.3.1-1 - Update to version 1.3.1; Fixes RHBZ#2049419 * Fri Jan 21 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 1.3.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ rust-serde-1.0.136-1.fc34 (FEDORA-2022-a85b1b36bf) Generic serialization/deserialization framework -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043972 -------------------------------------------------------------------------------- ================================================================================ rust-serde_derive-1.0.136-1.fc34 (FEDORA-2022-a85b1b36bf) Macros 1.1 implementation of #[derive(Serialize, Deserialize)] -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043973 -------------------------------------------------------------------------------- ================================================================================ rust-serde_test-1.0.136-1.fc34 (FEDORA-2022-a85b1b36bf) Token De/Serializer for testing De/Serialize implementations -------------------------------------------------------------------------------- Update Information: Update the serde, serde_derive, and serde_test crates to version 1.0.136. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Fabio Valentini <decathorpe(a)gmail.com> 1.0.136-1 - Update to version 1.0.136; Fixes RHBZ#2043974 -------------------------------------------------------------------------------- ================================================================================ tellico-3.4.3-1.fc34 (FEDORA-2022-57df963fb5) A collection manager -------------------------------------------------------------------------------- Update Information: Update to the latest stable release. The main changes since the last release are: * Fixed bug with opening target=_blank links; * Fixed crashing bug in audio file importer; * The kinopoisk.ru data source was updated; * The `Album` template was improved to account for possible changes in the `Tracks` field. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jos�� Matos <jamatos(a)fedoraproject.org> - 3.4.3-1 - Update to 3.4.3 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.4.2-4 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Tue Jan 18 2022 Kevin Fenzi <kevin(a)scrye.com> - 3.4.2-3 - Rebuild for hiredis 1.0.2 -------------------------------------------------------------------------------- References: [ 1 ] Bug #2036522 - tellico-3.4.3 is available https://bugzilla.redhat.com/show_bug.cgi?id=2036522 -------------------------------------------------------------------------------- ================================================================================ udiskie-2.4.1-1.fc34 (FEDORA-2022-4b16dd4447) Removable disk auto-mounter -------------------------------------------------------------------------------- Update Information: Update to version 2.4.1. -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Jan Stan��k <jstanek(a)redhat.com> 2.4.1-1 - Update to version 2.4.1 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> 2.4.0-2 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2049752 - udiskie-2.4.1 is available https://bugzilla.redhat.com/show_bug.cgi?id=2049752 -------------------------------------------------------------------------------- ================================================================================ vdr-epgsearch-2.4.2-0.1.20220201git76d2b10.fc34 (FEDORA-2022-71db3681a9) Powerful schedules menu replacement plugin for VDR -------------------------------------------------------------------------------- Update Information: - Update for new git snapshot - Rebuilt for new VDR API version -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 2.4.2-0.1.20220201git76d2b10 - Update for new git snapshot - Rebuilt for new VDR API version * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 2.4.1-5 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild * Thu Dec 30 2021 Martin Gansser <martinkg(a)fedoraproject.org> - 2.4.1-4 - Rebuilt for new VDR API version -------------------------------------------------------------------------------- ================================================================================ vdr-live-3.1.5-1.fc34 (FEDORA-2022-a6b8f8e660) An interactive web interface with HTML5 live stream support for VDR -------------------------------------------------------------------------------- Update Information: Update to 3.1.5-1 -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 3.1.5-1 - Update to 3.1.5 * Sat Jan 29 2022 Martin Gansser <martinkg(a)fedoraproject.org> - 3.1.4-0.4.20211228git0fbd9b3 - Add %undefine _package_note_flags to vdr main package - rebuild for rawhide * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.1.4-0.3.20211228git0fbd9b3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- ================================================================================ xen-4.14.4-1.fc34 (FEDORA-2022-0cc3916e08) Xen is a virtual machine monitor -------------------------------------------------------------------------------- Update Information: update to xen-4.14.4 ---- frontends vulnerable to backends [XSA-376] (document change only) arm: guest_physmap_remove_page not removing the p2m mappings [XSA-393, CVE-2022-23033] (#2045044) A PV guest could DoS Xen while unmapping a grant [XSA-394, CVE-2022-23034] (#2045042) Insufficient cleanup of passed- through device IRQs [XSA-395, CVE-2022-23035] (#2045040) -------------------------------------------------------------------------------- ChangeLog: * Thu Feb 3 2022 Michael Young <m.a.young(a)durham.ac.uk> - 4.14.4-1 - update to xen-4.14.4 remove or adjust patches now included or superceded upstream * Tue Jan 25 2022 Michael Young <m.a.young(a)durham.ac.uk> - 4.14.3-4 - frontends vulnerable to backends [XSA-376] (document change only) - arm: guest_physmap_remove_page not removing the p2m mappings [XSA-393, CVE-2022-23033] (#2045044) - A PV guest could DoS Xen while unmapping a grant [XSA-394, CVE-2022-23034] (#2045042) - Insufficient cleanup of passed-through device IRQs [XSA-395, CVE-2022-23035] (#2045040) -------------------------------------------------------------------------------- References: [ 1 ] Bug #2045039 - CVE-2022-23035 xen: Insufficient cleanup of passed-through device IRQs (XSA-395) https://bugzilla.redhat.com/show_bug.cgi?id=2045039 [ 2 ] Bug #2045041 - CVE-2022-23034 xen: A PV guest could DoS Xen while unmapping a grant (XSA-394) https://bugzilla.redhat.com/show_bug.cgi?id=2045041 [ 3 ] Bug #2045043 - CVE-2022-23033 xen: arm: guest_physmap_remove_page not removing the p2m mappings (XSA-393) https://bugzilla.redhat.com/show_bug.cgi?id=2045043 -------------------------------------------------------------------------------- ================================================================================ xstream-1.4.19-1.fc34 (FEDORA-2022-ad5cf1c0dd) Java XML serialization library -------------------------------------------------------------------------------- Update Information: * New upstream release 1.4.19 * Security: Fix for CVE-2021-43859 -------------------------------------------------------------------------------- ChangeLog: * Sat Jan 29 2022 Didik Supriadi <didiksupriadi41(a)fedoraproject.org> - 1.4.19-1 - New upstream release 1.4.19 * Sat Jan 22 2022 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.4.18-3 - Rebuilt for https://fedoraproject.org/wiki/Fedora_36_Mass_Rebuild -------------------------------------------------------------------------------- References: [ 1 ] Bug #2048135 - xstream-1.4.19 is available https://bugzilla.redhat.com/show_bug.cgi?id=2048135 [ 2 ] Bug #2049784 - CVE-2021-43859 xstream: Injecting highly recursive collections or maps can cause a DoS [fedora-all] https://bugzilla.redhat.com/show_bug.cgi?id=2049784 --------------------------------------------------------------------------------

1 0

Latest rawhide compose, updates gave unusual error, library not symbolic link.
by stan 03 Feb '22

03 Feb '22

Hi, I ran the latest updates to rawhide, and there are some errors I don't recall seeing before. /sbin/ldconfig: /lib64/libldap_r-2.4.so.2 is not a symbolic link /sbin/ldconfig: /lib64/libslapi-2.4.so.2 is not a symbolic link /sbin/ldconfig: /lib64/liblber-2.4.so.2 is not a symbolic link /sbin/ldconfig: /lib64/libldap_r-2.4.so.2 is not a symbolic link /sbin/ldconfig: /lib64/libslapi-2.4.so.2 is not a symbolic link There were also many package confict errors, but those are probably just packages out of sync with each other. I've attached the file of errors that include them, in case anyone is interested.

1 0

Picking a new time for the Prioritized Bugs meeting
by Ben Cotton 03 Feb '22

03 Feb '22

I have a personal conflict with the current meeting time for the Prioritized Bugs meeting, so I'm looking to reschedule. If you'd like to attend semi-regularly, please feel free to add your availability: https://whenisgood.net/c8iqggm/ I make no promises about when the meeting will be scheduled, but if there are times that are obviously favoriable, then I'll use that. If you're not sure what meeting I'm talking about, the Prioritized Bugs process is documented at: https://docs.fedoraproject.org/en-US/program_management/prioritized_bugs/ -- Ben Cotton He / Him / His Fedora Program Manager Red Hat TZ=America/Indiana/Indianapolis

2 2

[Test Day] Kernel 5.16 closing notes
by Sumantro Mukherjee 03 Feb '22

03 Feb '22

Hey All, This has been the best Kernel Test Week[0] ever! Here's the TLDR Total tests run: 510 Total testers: 143 Non x86 tests: 40 Non x86 testers: 8 Scaling up and retaining contributors has always been a goal for the Fedora QA community. This success is credited to the strong community and we are thankful to every one of you, who come together to make this a bigger success than the last one! As part of '22 goals, we would like to establish not only more contribution opportunities but also bring more recognition opportunities to our contributors. Stay Tuned! PS: Special thanks to Justin Forbes for compiling new changes and building iso and the Fedora Magazine team has always been nothing less than supportive! You guys are *awesome* :) [0] https://pagure.io/fedora-qa/issue/689 [1] https://pagure.io/fedora-qa/issue/689#comment-777993 -- //sumantro Fedora QE TRIED AND PERSONALLY TESTED, ERGO TRUSTED

1 0

Fedora-Cloud-34-20220203.0 compose check report
by Fedora compose checker 03 Feb '22

03 Feb '22

No missing expected images. Soft failed openQA tests: 1/8 (x86_64), 1/8 (aarch64) (Tests completed, but using a workaround for a known bug) Old soft failures (same test soft failed in Fedora-Cloud-34-20220202.0): ID: 1118617 Test: x86_64 Cloud_Base-qcow2-qcow2 cloud_autocloud URL: https://openqa.fedoraproject.org/tests/1118617 ID: 1118630 Test: aarch64 Cloud_Base-qcow2-qcow2 cloud_autocloud@uefi URL: https://openqa.fedoraproject.org/tests/1118630 Passed openQA tests: 7/8 (x86_64), 7/8 (aarch64) -- Mail generated by check-compose: https://pagure.io/fedora-qa/check-compose

1 0

Fedora-Cloud-35-20220203.0 compose check report
by Fedora compose checker 03 Feb '22

03 Feb '22

No missing expected images. Soft failed openQA tests: 1/8 (x86_64), 1/8 (aarch64) (Tests completed, but using a workaround for a known bug) Old soft failures (same test soft failed in Fedora-Cloud-35-20220202.0): ID: 1118600 Test: x86_64 Cloud_Base-qcow2-qcow2 cloud_autocloud URL: https://openqa.fedoraproject.org/tests/1118600 ID: 1118613 Test: aarch64 Cloud_Base-qcow2-qcow2 cloud_autocloud@uefi URL: https://openqa.fedoraproject.org/tests/1118613 Passed openQA tests: 7/8 (x86_64), 7/8 (aarch64) -- Mail generated by check-compose: https://pagure.io/fedora-qa/check-compose

1 0

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

2008

2007

2006

2005

2004

2003

test February 2022