Hello All
Planning to write an extension of my previous article on buildah based
on below points
1) Using Docker file to create image
2) using buildah bud to allocate cpu, memory limits
3) mounting volumes using buildah command
4) buildah commit
5) buildah copy
Looking for approval and suggestions
Thanks
Ashutosh
Hi there.
I've modified the article with all the fantastic suggestions by Dale Raby.
Also I've removed the duplicated content and converted the document to ODF,
PDF and txt for people with slow computers or no google account.
Thanks for all and regards.
On Tue, Jun 26, 2018 at 10:45 AM Oliver Gutierrez <ogutierrez(a)redhat.com>
wrote:
> Thank you very much Dale. I'm fixing the whole things you pointed. Almost
> all of them make sense from the IT part. :)
>
> I will finish the modifications maybe today or tomorrown and I will change
> the document to a text document so you can review it better :)
>
> Thanks for your help and your time!
>
> On Sat, Jun 23, 2018 at 4:53 AM Dale Raby <daleraby(a)gmail.com> wrote:
>
>> Just put in some suggestions. Your English is better than my Spanish but
>> I found a few minor grammatical errors.
>>
>> The biggest problem I found was that there seems to be a large block of
>> text that is a duplication. The section with the graphics is difficult for
>> me to view with my slow connection here.
>>
>> Google documents are always difficult for me to edit. Google assumes
>> that everyone has very fast connections and modern machines. I have
>> neither. It put me into "suggestion mode", which is actually very clever
>> of them... if only I had a fast connection!
>>
>> Bear in mind, that while I am a native speaker of English and have
>> actually done quite a bit of writing, I am NOT an IT expert. So.... take
>> any suggestions I give you with caution. I could be misunderstanding your
>> intent.
>>
>> I will look at this again tomorrow when I am not half asleep. Neighbor's
>> cattle (Herfords, two heifers, a calf and a 1,200 pound bull) got out onto
>> the road this evening. I and former US Congressman Alan Lasee helped a
>> police officer and the owner get them back into the enclosure. Was quite
>> enough excitement for me!
>>
>> Dale
>>
>> On Fri, Jun 22, 2018 at 4:14 PM, Oliver Gutierrez <ogutierrez(a)redhat.com>
>> wrote:
>>
>>> Thank you very much Mr Raby! Just give me the time to separate it in
>>> sections (so I will need to ad intros and outros for each block) and after
>>> that I will need a review.
>>>
>>> In the meantime, I will give you the access you required :)
>>>
>>> You just need to access the document in this URL
>>>
>>>
>>> https://docs.google.com/document/d/1VpQhEoTXUkrzTxxVLxLED3IkZL_Lj3JptZ5m1FM…
>>>
>>> Then Google will allow you to ask for document access and I will receive
>>> a notification to give you the permissions.
>>>
>>> If you do that and you see I had not answered or allowed, please tell me
>>> because maybe the notification is lost in my inbox.
>>>
>>> Again thanks.
>>>
>>>
>>> P.D. Swear words in spanish are usually enough to be very communicative
>>> of your current mood :P
>>>
>>> P.D. 2: After trying to send this email again, google asked me to give
>>> automatic access to view the document to recipients, so maybe you will be
>>> able to see it after receiving this.
>>>
>>>
>>> On Fri, Jun 22, 2018 at 4:35 PM Dale Raby <daleraby(a)gmail.com> wrote:
>>>
>>>> Senor Gutierrez:
>>>>
>>>> I will be happy to look over your article(s) and address any linguistic
>>>> issues. I speak English quite well, German OK, but my Spanish is
>>>> limited
>>>> to swear words my Puerto Rican roommate taught me during my army days.
>>>>
>>>> I need permission to access your document though.
>>>>
>>>> Dale
>>>>
>>>> On Fri, Jun 22, 2018 at 6:50 AM, Oliver Gutierrez <
>>>> ogutierrez(a)redhat.com>
>>>> wrote:
>>>>
>>>> > Yeah, I can do that. Just give me some time to do it and I can
>>>> separate
>>>> > them into more "atomic" pieces :)
>>>> >
>>>> > Thanks for reviewing!
>>>> >
>>>> >
>>>> > On Fri, Jun 22, 2018 at 2:16 AM Paul Frields <stickster(a)gmail.com>
>>>> wrote:
>>>> >
>>>> > > On Thu, Jun 7, 2018 at 1:06 PM Oliver Gutierrez <
>>>> ogutierrez(a)redhat.com>
>>>> > > wrote:
>>>> > > >
>>>> > > > Hi there.
>>>> > > >
>>>> > > > Here it is the Fleet Commander draft article I promised to Paul
>>>> for
>>>> > > review.
>>>> > > >
>>>> > > >
>>>> > > https://docs.google.com/document/d/1VpQhEoTXUkrzTxxVLxLED3IkZL_
>>>> > Lj3JptZ5m1FMDRHU/edit?usp=sharing
>>>> > > >
>>>> > > > Please, tell me whatever change you want to enhance it and as
>>>> English
>>>> > is
>>>> > > > not my mother language, any suggestion, correction etc. is most
>>>> > welcome.
>>>> > >
>>>> > > Hi Oliver,
>>>> > >
>>>> > > There's a LOT of good material here! However, 13 pages is just too
>>>> > > long for a Magazine article. (Although your document looks like it
>>>> > > might duplicate material, and it might be 6.5 pages * 2.) Can you
>>>> > > consider cutting this up into a couple articles? They could run like
>>>> > > this:
>>>> > >
>>>> > > * What is FC and how do you install it?
>>>> > > * Setting up a test environment and showing how to set up a profile
>>>> > >
>>>> > > --
>>>> > > Paul
>>>> > >
>>>> > _______________________________________________
>>>> > Fedora Magazine mailing list -- magazine(a)lists.fedoraproject.org
>>>> > To unsubscribe send an email to
>>>> magazine-leave(a)lists.fedoraproject.org
>>>> > Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
>>>> > List Guidelines:
>>>> https://fedoraproject.org/wiki/Mailing_list_guidelines
>>>> > List Archives:
>>>> https://lists.fedoraproject.org/archives/list/magazine@
>>>> > lists.fedoraproject.org/message/7DXFRUSQMU3UQCVXLUE67ZZBKPWXPYFX/
>>>> >
>>>>
>>>>
>>>>
>>>> --
>>>>
>>>>
>>>>
>>>> *Buy my books! The Wives of Jacob, Book I, In the Beginning, The
>>>> Post-Apocalyptic Blacksmith, 777 Bon Mots for Gunslingers and Other Real
>>>> Men, available at most on-line booksellers in multiple formats.Note:
>>>> The
>>>> People of Jacb, Book II, In the Middle is currently being copy-editedand
>>>> should be out soon. Just Google my name for a complete list of my
>>>> work.*
>>>> _______________________________________________
>>>> Fedora Magazine mailing list -- magazine(a)lists.fedoraproject.org
>>>> To unsubscribe send an email to magazine-leave(a)lists.fedoraproject.org
>>>> Fedora Code of Conduct: https://getfedora.org/code-of-conduct.html
>>>> List Guidelines: https://fedoraproject.org/wiki/Mailing_list_guidelines
>>>> List Archives:
>>>> https://lists.fedoraproject.org/archives/list/magazine@lists.fedoraproject.…
>>>>
>>>
>>
>>
>> --
>>
>>
>> *Buy my books! The Wives of Jacob, Book I, In the Beginning, The
>> Post-Apocalyptic Blacksmith, 777 Bon Mots for Gunslingers and Other Real
>> Men, available at most on-line booksellers in multiple formats.*
>>
>> *Note: The People of Jacb, Book II, In the Middle is currently being
>> copy-editedand should be out soon. Just Google my name for a complete list
>> of my work.*
>>
>>
Dear all,
You are kindly invited to the meeting:
Magazine editorial board on 2018-02-14 from 08:00:00 to 09:00:00 America/New_York
At fedora-meeting(a)irc.freenode.net
The meeting will be about:
This meeting is for editors of the [Fedora Magazine](https://fedoramagazine.org) site. The agenda primarily consists of deciding, assigning, and scheduling posts for the upcoming weeks.
More information available at:
[https://fedoraproject.org/wiki/Magazine](https://fedoraproject.org/wiki/Mag…
Source: https://apps.fedoraproject.org/calendar/meeting/6937/
All,
Recently had to use Fedora to clone a Nintendo switch’s MAC address to register it with a hotel captive portal. Thought it would be an interesting article. The pitch is at:
https://fedoramagazine.org/?p=22833
v/r,
SW
It was a SPOOOOOOOOOOKY meeting, too. ;-) 👻 🎃 😈 😱
Minutes: https://meetbot.fedoraproject.org/fedora-meeting/2018-10-31/magazine.2018-1…
Minutes (text): https://meetbot.fedoraproject.org/fedora-meeting/2018-10-31/magazine.2018-1…
Log: https://meetbot.fedoraproject.org/fedora-meeting/2018-10-31/magazine.2018-1…
* * *
=========================================
#fedora-meeting: Magazine editorial board
=========================================
Meeting started by stickster at 20:00:29 UTC. The full logs are
available at
https://meetbot.fedoraproject.org/fedora-meeting/2018-10-31/magazine.2018-1…
.
Meeting summary
---------------
* Roll call (stickster, 20:00:35)
* Last week's stats (stickster, 20:04:22)
* Week of October 22: > 66.6K pageviews -- up from previous week and
not bad (stickster, 20:04:59)
* Pending review posts (stickster, 20:06:54)
* LINK:
https://fedoramagazine.org/wp-admin/edit.php?post_status=pending&post_type=…
(stickster, 20:07:00)
* --- VS Code live share --- (stickster, 20:07:22)
* AGREED: cverna will get more info on open sourcing, add that, and
we'll go from there; also consider adding info about gobby05
(stickster, 20:18:38)
* --- Selenium --- (stickster, 20:18:51)
* LINK: https://fedoramagazine.org/?p=22962&preview=1&_ppp=8f14107c87
(stickster, 20:19:03)
* ACTION: asamalik add editorial comment about basing Dockerfile on
Fedora (stickster, 20:23:08)
* --- ML model --- (stickster, 20:24:14)
* LINK: https://fedoramagazine.org/?p=22888&preview=1&_ppp=63d278247b
(stickster, 20:24:17)
* AGREED: add ML model article to publishing schedule (stickster,
20:26:53)
* Drafts to review (stickster, 20:27:25)
* LINK:
https://fedoramagazine.org/wp-admin/edit.php?post_status=draft&post_type=po…
(stickster, 20:27:38)
* --- NEST simulator --- (stickster, 20:27:47)
* LINK: https://fedoramagazine.org/?p=22859&preview=1&_ppp=4f01713e66
(stickster, 20:27:52)
* AGREED: cverna to edit NEST article and we can publish Fri
2018-Nov-02 (stickster, 20:29:50)
* ACTION: cverna edit NEST article (stickster, 20:29:59)
* ACTION: stickster or ryanlerch do image for NEST article
(stickster, 20:30:17)
* --- 15 years of Fedora --- (stickster, 20:31:34)
* LINK: https://fedoramagazine.org/?p=21118&preview=1&_ppp=292ed7ee0b
(stickster, 20:31:40)
* ACTION: ryanlerch do image for 15 years of Fedora so it can go out
Nov-06 (stickster, 20:32:31)
* ACTION: asamalik Write a CLI quick tip article for us to publish on
Monday (stickster, 20:37:27)
* ACTION: stickster do image for CLI quick tip article and publish
(stickster, 20:38:21)
* Pitches to approve (stickster, 20:38:57)
* --- Cloning console MAC address --- (stickster, 20:39:12)
* LINK:
https://lists.fedoraproject.org/archives/list/magazine@lists.fedoraproject.…
(stickster, 20:39:33)
* LINK: https://fedoramagazine.org/?p=22833&preview=true (cverna,
20:40:45)
* AGREED: MAC address pitch goes forward (stickster, 20:45:26)
* ACTION: stickster email author/list (DONE) (stickster, 20:46:14)
* --- Develop cloud native apps --- (stickster, 20:46:31)
* LINK: https://fedoramagazine.org/?p=23093&preview=1&_ppp=1f7039ec29
(stickster, 20:46:44)
* AGREED: cloud native app series approved (stickster, 20:47:53)
* Publishing schedule (stickster, 20:49:07)
* AGREED: PUBLISHING SCHEDULE: Fri Nov 02, Machine learning
(stickster) -- Mon Nov 05, CLI article
(asamalik:write/stickster:edit+image) -- Tue Nov 06, 15 years
(ryanlerch:image) -- Wed Nov 07 or Thu Nov 08, Selenium
(cverna:edit/ryanlerch:image) -- Fri Nov 09, TBD (stickster,
20:53:03)
* All other business (open floor) (stickster, 20:53:14)
* LINK:
https://fedoramagazine.org/wp-admin/admin.php?page=jetpack#/dashboard
(cverna, 20:54:19)
* asamalik will probably run next week's meeting for fun (stickster,
20:57:06)
Meeting ended at 20:57:53 UTC.
Action Items
------------
* asamalik add editorial comment about basing Dockerfile on Fedora
* cverna edit NEST article
* stickster or ryanlerch do image for NEST article
* ryanlerch do image for 15 years of Fedora so it can go out Nov-06
* asamalik Write a CLI quick tip article for us to publish on Monday
* stickster do image for CLI quick tip article and publish
* stickster email author/list (DONE)
Action Items, by person
-----------------------
* asamalik
* asamalik add editorial comment about basing Dockerfile on Fedora
* asamalik Write a CLI quick tip article for us to publish on Monday
* cverna
* cverna edit NEST article
* ryanlerch
* stickster or ryanlerch do image for NEST article
* ryanlerch do image for 15 years of Fedora so it can go out Nov-06
* stickster
* stickster or ryanlerch do image for NEST article
* stickster do image for CLI quick tip article and publish
* stickster email author/list (DONE)
* **UNASSIGNED**
* (none)
People Present (lines said)
---------------------------
* stickster (123)
* asamalik (49)
* cverna (42)
* zodbot (19)
* Southern_Gentlem (4)
* ryanlerch (0)
Generated by `MeetBot`_ 0.1.4
.. _`MeetBot`: http://wiki.debian.org/MeetBot
--
Paul W. Frields http://paul.frields.org/
gpg fingerprint: 3DA6 A0AC 6D58 FEC4 0233 5906 ACDB C937 BD11 3717
http://redhat.com/ - - - - http://pfrields.fedorapeople.org/
The open source story continues to grow: http://opensource.com
IIRC even when Fedora 28 has been released you had the same issue.
The one big "learn more" button in GNOME Software, when you see the Fedora 29 upgrade being offered, goes to this site:
https://fedoramagazine.org/whats-new-fedora-29-workstation
And yet again, what waits is just a 404 error page. Seriously, this is really a no-go. :)
Dear all,
You are kindly invited to the meeting:
Magazine editorial board on 2018-10-31 from 16:00:00 to 17:00:00 America/New_York
At fedora-meeting(a)irc.freenode.net
The meeting will be about:
This meeting is for editors of the [Fedora Magazine](https://fedoramagazine.org) site. The agenda primarily consists of deciding, assigning, and scheduling posts for the upcoming weeks.
More information available at:
[https://fedoraproject.org/wiki/Magazine](https://fedoraproject.org/wiki/Mag…
Source: https://apps.fedoraproject.org/calendar/meeting/9224/
Hi all,
The Live Share article is ready for review. Although I think we don't want
to publish it. I had the good idea to check the Live Share plugin source
code and it I found out that it is not open source :( so I don't think we
want to publish this article.
Thanks
Clément
Hi!
The draft for browser automation with Selenium is ready for review (my
first!). It does not have a featured image yet as I don't quite feel up to
the task of creating one. I can give it a try if you want of course!
Here is the preview:
https://fedoramagazine.org/?p=22962&preview=true&preview_id=22962
Thanks,
Lennart
Hi,
I have problems making comments on the magazine, it always loads endless
long and then brings me an 503 page. Its not a one timer, it happens
each comment right now.
br gnokii