This always used to work. Plugging in this sansa device would open the plasma, showing
the device. Now, nothing happens. Log says:
Dec 31 17:34:38 nbecker1 kernel: usb 5-2: USB disconnect, address 4
Dec 31 17:34:45 nbecker1 kernel: usb 2-2: new high speed USB device using ehci_hcd and
address 6
Dec 31 17:34:45 nbecker1 kernel: ehci_hcd 0000:00:1d.7: port 2 reset error -110
Dec 31 17:34:45 nbecker1 kernel: hub 2-0:1.0: hub_port_status failed (err = -32)
Dec 31 17:34:45 nbecker1 kernel: hub 2-0:1.0: unable to enumerate USB device on port 2
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: new full speed USB device using uhci_hcd and
address 5
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: not running at top speed; connect to a high
speed hub
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: configuration #1 chosen from 1 choice
Dec 31 17:34:46 nbecker1 kernel: scsi7 : SCSI emulation for USB Mass Storage devices
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: New USB device found, idVendor=0781,
idProduct=7432
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: New USB device strings: Mfr=6, Product=7,
SerialNumber=8
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: Product: SanDisk Sansa Clip
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: Manufacturer: SanDisk
Dec 31 17:34:46 nbecker1 kernel: usb 5-2: SerialNumber: F4FEF9132030B5910000000000000000
Show replies by date
In contrast, here's what happens with a device that works properly:
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: new full speed USB device using uhci_hcd and
address 6
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: configuration #1 chosen from 2 choices
Dec 31 17:41:55 nbecker1 kernel: scsi8 : SCSI emulation for USB Mass Storage devices
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: New USB device found, idVendor=22b8,
idProduct=4810
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: Product: Motorola Phone (V3i)
Dec 31 17:41:55 nbecker1 kernel: usb 5-2: Manufacturer: Motorola Inc.
Dec 31 17:42:01 nbecker1 kernel: scsi 8:0:0:0: Direct-Access Motorola Motorola Phone
2.31 PQ: 0 ANSI: 2
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] 494080 512-byte hardware sectors (253
MB)
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] Write Protect is off
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] Assuming drive cache: write through
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] 494080 512-byte hardware sectors (253
MB)
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] Write Protect is off
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] Assuming drive cache: write through
Dec 31 17:42:01 nbecker1 kernel: sdc: sdc1
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: [sdc] Attached SCSI removable disk
Dec 31 17:42:01 nbecker1 kernel: sd 8:0:0:0: Attached scsi generic sg3 type 0