Hi,
I still could not get 1920x1200. However, 1680x1050 worked.
Should I be using the nvidia driver distributed with Fedora?
================ XF86Config snippet =========================
Section "Device"
Identifier "Videocard0"
Driver "nv"
VendorName "Videocard vendor"
BoardName "NVIDIA Quadro FX (generic)"
EndSection
==============================================================
-----Original Message-----
From: fedora-test-list-bounces(a)redhat.com on behalf of Emmanuel Seyman
Sent: Tue 5/25/2004 6:30 PM
To: For testers of Fedora Core development releases
Subject: Re: 1920x1200 LCD unwanted borders
On Tue, May 25, 2004 at 06:14:42PM -0400, Ernest L. Williams Jr. wrote:
Yes, I have Nvidia.
Please help.
Cut and paste this in your XF86Config/xorg.conf file:
Section "Modes"
Identifier "16:10"
# 1280x800 @ 75.00 Hz (GTF) hsync: 62.62 kHz; pclk: 107.21 MHz
Modeline "1280x800" 107.21 1280 1360 1496 1712 800 801 804 835
# 1280x800 @ 85.00 Hz (GTF) hsync: 71.40 kHz; pclk: 123.38 MHz
Modeline "1280x800" 123.38 1280 1368 1504 1728 800 801 804 840
# 1280x800 @ 100.00 Hz (GTF) hsync: 84.80 kHz; pclk: 147.89 MHz
Modeline "1280x800" 147.89 1280 1376 1512 1744 800 801 804 848
# 1680x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 147.14 MHz
Modeline "1680x1050" 147.14 1680 1784 1968 2256 1050 1051 1054 1087
# 1680x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 188.07 MHz
Modeline "1680x1050" 188.07 1680 1800 1984 2288 1050 1051 1054 1096
# 1680x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 214.51 MHz
Modeline "1680x1050" 214.51 1680 1800 1984 2288 1050 1051 1054 1103
# 1680x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 256.20 MHz
Modeline "1680x1050" 256.20 1680 1808 1992 2304 1050 1051 1054 1112
# 1920x1200 @ 75.00 Hz (GTF) hsync: 93.97 kHz; pclk: 246.59 MHz
Modeline "1920x1200" 246.59 1920 2064 2272 2624 1200 1201 1204 1253
# 1920x1200 @ 85.00 Hz (GTF) hsync: 107.10 kHz; pclk: 282.74 MHz
Modeline "1920x1200" 282.74 1920 2072 2280 2640 1200 1201 1204 1260
# 1920x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 337.58 MHz
Modeline "1920x1200" 337.58 1920 2072 2288 2656 1200 1201 1204 1271
EndSection
In the "Monitor" section of the file, add these two lines:
Modeline "1920x1200" 246.59 1920 2064 2272 2624 1200 1201 1204 1253
UseModes "16:10"
Finally, in the "Screen" section, put "1920x1200" first in the list of
Modes
for the "Display" subsection.
Save the changes, restart
XFree86/X.org with Ctrl-Alt-Backspace and you should
be in fullscreen.
Emmanuel
--
fedora-test-list mailing list
fedora-test-list(a)redhat.com
To unsubscribe:
http://www.redhat.com/mailman/listinfo/fedora-test-list