I tried both 'tiacx111.bin' and TIACX111.BIN in /lib/firmware. Neither works.
From: John Summerfied debian@herakles.homelinux.org Reply-To: For testers of Fedora Core development releases fedora-test-list@redhat.com To: For testers of Fedora Core development releases fedora-test-list@redhat.com Subject: Re: ACX100 -acx.ko module for TI ACX111 chipsets Date: Mon, 12 Dec 2005 12:04:43 +0800
Don Springall wrote:
I am trying to get the acx module to work for my linksys WPC54G v2 wireless card working. The module is currently in the MM tree only. It cannot seem to find the firmware. I stuck the firmware in as /lib/firmware/TIACX111.BIN but I still get this in dmesg:
acx: found ACX111-based wireless network card at 0000:07:00.0, irq:10, phymem1:0x28020000, phymem2:0x28000000, mem1:0xd087c000, mem1_size:8192, mem2:0xd0940000, mem2_size:131072 initial debug setting is 0x000A using IRQ 10 requesting firmware image 'tiacx111c16' acx: firmware image 'tiacx111c16' was not provided. Check your hotplug scripts requesting firmware image 'tiacx111' acx: firmware image 'tiacx111' was not provided. Check your hotplug scripts acx: reset_dev() FAILED ACPI: PCI interrupt for device 0000:07:00.0 disabled acx_pci: probe of 0000:07:00.0 failed with error -5
ndiswrapper uses the firmware from linksys which is /lib/firmware/FwRad17.bin and /lib/firmware/FwRad16.bin Does anyone have any experience getting this to work ?
case matters. Try renameing the file to 'tiacx111' or 'tiacx111.bin'
--
Cheers John