kvm-16 and f7t2 livecd
by James Hubbard
I've noticed that when I boot the Fedora 7 Test 2 livecd with
kvm-16/qemu (VT enabled) that the network doesn't activate and the
screen resolution maximum is 800x600. Using the network tool to
activate the network causes the adapter to get an ip address.
Grub doesn't display properly, but that's a known problem from what I
can tell when reading through the kvm archives. Using the -std-vga
option allows grub to display properly, but an error message is
produced. Pressing enter at the garbled screen allows the boot
process to continue.
For comparison, I can boot a Knoppix iso and the network activates.
The screen resolution is greater than 800x600.
I'm running on FC6 with the latest updates. KVM-16 was downloaded on
Thursday. Here's the command that I'm using to boot the iso images.
/usr/local/bin/qemu -cdrom iso_file_name -m 768
--
James Hubbard
http://soweva.blogspot.com
17 years, 3 months
Kernel 2.6.20-1.2997.fc7 won't boot -- fails to start init
by Miles Lane
Hi,
Seems like it's been a while since a development kernel would boot on
my laptop. Any ETA for a new working kernel? My laptop is a HP
dv1240us.
00:00.0 Host bridge: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:00.1 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:00.3 System peripheral: Intel Corporation 82852/82855 GM/GME/PM/GMV
Processor to I/O Controller (rev 02)
00:02.0 VGA compatible controller: Intel Corporation 82852/855GM
Integrated Graphics Device (rev 02)
00:02.1 Display controller: Intel Corporation 82852/855GM Integrated
Graphics Device (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 (rev 03)
00:1d.1 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 (rev 03)
00:1d.2 USB Controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 (rev 03)
00:1d.7 USB Controller: Intel Corporation 82801DB/DBM (ICH4/ICH4-M)
USB2 EHCI Controller (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 83)
00:1f.0 ISA bridge: Intel Corporation 82801DBM (ICH4-M) LPC Interface
Bridge (rev 03)
00:1f.1 IDE interface: Intel Corporation 82801DBM (ICH4-M) IDE
Controller (rev 03)
00:1f.3 SMBus: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
SMBus Controller (rev 03)
00:1f.5 Multimedia audio controller: Intel Corporation 82801DB/DBL/DBM
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 03)
00:1f.6 Modem: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M)
AC'97 Modem Controller (rev 03)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
RTL-8139/8139C/8139C+ (rev 10)
01:06.0 Network controller: Intel Corporation PRO/Wireless 2200BG
Network Connection (rev 05)
01:09.0 CardBus bridge: Texas Instruments PCIxx21/x515 Cardbus Controller
01:09.2 FireWire (IEEE 1394): Texas Instruments OHCI Compliant IEEE
1394 Host Controller
01:09.3 Mass storage controller: Texas Instruments PCIxx21 Integrated
FlashMedia Controller
01:09.4 Class 0805: Texas Instruments
PCI6411/6421/6611/6621/7411/7421/7611/7621 Secure Digital Controller
17 years, 3 months
rawhide report: 20070317 changes
by Build System
Updated Packages:
ElectricFence-2.2.2-22
----------------------
* Fri Mar 16 2007 Petr Machata <pmachata(a)redhat.com> - 2.2.2-22
- Remove bad cast in ElectricFence mmap (George Beshers)
- Resolves: #232695
* Wed Feb 07 2007 Petr Machata <pmachata(a)redhat.com> - 2.2.2-21
- Tidy up the specfile per rpmlint comments
ant-0:1.6.5-4jpp.1.fc7
----------------------
* Fri Mar 16 2007 Permaine Cheung <pcheung(a)redhat.com> 1.6.5-4jpp.1
- Merge with upstream, get rid of the endorsed patch
* Tue Feb 20 2007 Permaine Cheung <pcheung(a)redhat.com> 1.6.5-2jpp.3
- Add endorsed dir and create symlinks for xml-commons-apis and
jaxp_parser_impl there, and add the option when running ant.
- Add missing BR
- Fix some rpmlint issues
* Fri Feb 09 2007 Ralph Apel <r.apel at r-apel.de> - 0:1.6.5-4jpp
- Must skip release 3 because Youri::Bugzilla::_add_version doesn't
distinguish between JPP-1.6 and JPP-1.7 and we have 1.6.5-3 in 1.6
bind-31:9.4.0-3.fc7
-------------------
* Tue Mar 13 2007 Adam Tkac <atkac redhat com> 31:9.4.0-3.fc7
- prepared bind to merge review
- added experimental idn support to bind-utils utils (not enabled by default yet)
- change chroot policy in caching-nameserver post section
- fixed bug in bind-chroot-admin - rootdir function is called properly now
cups-1:1.2.9-1.fc7
------------------
* Fri Mar 16 2007 Tim Waugh <twaugh(a)redhat.com> 1:1.2.9-1
- 1.2.9.
eclipse-1:3.2.2-5.fc7
---------------------
* Fri Mar 16 2007 Ben Konrath <bkonrath(a)redhat.com> 3.2.2-5
- Update package-build releng script to work with mylar.
epiphany-2.18.0-2.fc7
---------------------
* Fri Mar 16 2007 - Bastien Nocera <bnocera(a)redhat.com> 2.18.0-2
- Have ephy pick up on the 64-bit plugins (#204547)
jakarta-commons-daemon-1:1.0.1-6jpp.2.fc7
-----------------------------------------
* Fri Jan 26 2007 Permaine Cheung <pcheung(a)redhat.com> - 1:1.0.1-6jpp.2
- Added versioning to provides and obsoletes and rpmlint cleanup
jakarta-commons-httpclient-1:3.0.1-1jpp.1.fc7
---------------------------------------------
* Fri Mar 16 2007 Permaine Cheung <pcheung(a)redhat.com> - 1:3.0.1-1jpp.1
- Merge with upstream and more rpmlint cleanup.
* Thu Feb 15 2007 Fernando Nasser <fnasser(a)redhat.com> - 1:3.0.1-1jpp
- Upgrade to 3.0.1
* Fri Jan 26 2007 Permaine Cheung <pcheung(a)redhat.com> - 1:3.0-8jpp
- Added versions for provides and obsoletes and rpmlint cleanup.
kernel-2.6.20-1.2997.fc7
------------------------
* Fri Mar 16 2007 Dave Jones <davej(a)redhat.com>
- don't wakeup ondemand timer whilst idle.
* Fri Mar 16 2007 Dave Jones <davej(a)redhat.com>
- Add driver for USB EHCI debug cables.
* Fri Mar 16 2007 John W. Linville <linville(a)redhat.com>
- Add snapshot of iwlwifi driver from www.intellinuxwireless.org
libvirt-0.2.1-1.fc7
-------------------
* Fri Mar 16 2007 Daniel Veillard <veillard(a)redhat.com> - 2.0.1-1.fc7
- Release of 0.2.1
- lot of bug and portability fixes
- Add support for network autostart and init scripts
- New API to detect the virtualization capabilities of a host
- Documentation updates
libwpd-0.8.9-1.fc7
------------------
* Fri Mar 16 2007 Caolan McNamara <caolanm(a)redhat.com> - 0.8.9-1
- next version
make-1:3.81-6.fc7
-----------------
* Fri Mar 16 2007 Petr Machata <pmachata(a)redhat.com> - 1:3.81-6
- Always run testsuite with C locale.
- Resolves: #232607
man-pages-2.43-11.fc7
---------------------
* Fri Mar 16 2007 Ivana Varekova <varekova(a)redhat.com> 2.43-11
- Resolves: 230899
Error in the man-pages.spec file: incorrect encoding convertation
man-pages-ja-20070315-1
-----------------------
* Fri Mar 16 2007 Akira TAGOH <tagoh(a)redhat.com> - 20070315-1
- updates to 20070315.
- convert a spec file to UTF-8.
- remove empty translation_list.
samba-0:3.0.24-4.fc7
--------------------
* Fri Mar 16 2007 Guenther Deschner <gdeschner(a)redhat.com> 3.0.24-4.fc7
- fix arch macro which reported Vista to Samba clients.
* Thu Mar 15 2007 Simo Sorce <ssorce(a)redhat.com> 3.0.24-3.fc7
- Directories reorg, tdb files must go to /var/lib, not
to /var/cache, add migration script in %post common
- Split out devel and doc packages
- Remove libmsrpc.[h|so] for now as they are not really usable
shadow-utils-2:4.0.18.1-11.fc7
------------------------------
* Fri Mar 16 2007 Peter Vrabec <pvrabec(a)redhat.com> 2:4.0.18.1-11
- assign system dynamic UID/GID from the top of available UID/GID (#190523)
system-config-printer-0.7.56-1.fc7
----------------------------------
* Fri Mar 16 2007 Tim Waugh <twaugh(a)redhat.com> 0.7.56-1
- 0.7.56:
- Parse Boolean strings correctly in job options.
- Small command-set list/string fix (bug #230665).
- Handle hostname look-up failures.
- Updated filter-to-driver map.
- Don't parse printers.conf (bug #231826).
Broken deps for s390
----------------------------------------------------------
systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
17 years, 3 months
Kernel 2.6.20-1.2990.fc7 bcm43xx messages
by Patrick Lists
Hi,
Just updated to latest Rawhide with kernel 2.6.20-1.2990.fc7. When I
rebooted I saw a lot of messages that weren't there when running the
previous 2985 kernel. Are these messages extra debug ouput or something
else? Should I bugzilla this?
Regards,
Patrick
bcm43xx: Microcode rev 0x127, pl 0xe (2005-04-18 02:36:27)
bcm43xx: Radio turned on
bcm43xx: Radio enabled by hardware
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
[<c04061ed>] show_trace_log_lvl+0x1a/0x2f
[<c04067b1>] show_trace+0x12/0x14
[<c0406835>] dump_stack+0x16/0x18
[<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
[<f94c0c9b>] bcm43xx_radio_set_txpower_bg+0x210/0x225 [bcm43xx]
[<f94c5865>] bcm43xx_phy_initb6+0x6da/0x80d [bcm43xx]
[<f94c5a43>] bcm43xx_phy_initg+0xab/0xcf7 [bcm43xx]
[<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
[<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
[<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
[<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
[<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
[<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
[<c05b4309>] dev_open+0x2e/0x66
[<c05b2c6d>] dev_change_flags+0x51/0xf1
[<c05bb01b>] rtnl_setlink+0x265/0x37e
[<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
[<c05c6bf1>] netlink_run_queue+0x65/0xd1
[<c05ba421>] rtnetlink_rcv+0x29/0x42
[<c05c707c>] netlink_data_ready+0x15/0x56
[<c05c6061>] netlink_sendskb+0x1f/0x37
[<c05c694c>] netlink_unicast+0x1ab/0x1c5
[<c05c705b>] netlink_sendmsg+0x271/0x27d
[<c05aa077>] sock_sendmsg+0xe7/0x104
[<c05aa1e5>] sys_sendmsg+0x151/0x1af
[<c05ab1d0>] sys_socketcall+0x220/0x241
[<c040507c>] syscall_call+0x7/0xb
=======================
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
[<c04061ed>] show_trace_log_lvl+0x1a/0x2f
[<c04067b1>] show_trace+0x12/0x14
[<c0406835>] dump_stack+0x16/0x18
[<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
[<f94c6542>] bcm43xx_phy_initg+0xbaa/0xcf7 [bcm43xx]
[<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
[<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
[<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
[<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
[<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
[<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
[<c05b4309>] dev_open+0x2e/0x66
[<c05b2c6d>] dev_change_flags+0x51/0xf1
[<c05bb01b>] rtnl_setlink+0x265/0x37e
[<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
[<c05c6bf1>] netlink_run_queue+0x65/0xd1
[<c05ba421>] rtnetlink_rcv+0x29/0x42
[<c05c707c>] netlink_data_ready+0x15/0x56
[<c05c6061>] netlink_sendskb+0x1f/0x37
[<c05c694c>] netlink_unicast+0x1ab/0x1c5
[<c05c705b>] netlink_sendmsg+0x271/0x27d
[<c05aa077>] sock_sendmsg+0xe7/0x104
[<c05aa1e5>] sys_sendmsg+0x151/0x1af
[<c05ab1d0>] sys_socketcall+0x220/0x241
[<c040507c>] syscall_call+0x7/0xb
=======================
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
[<c04061ed>] show_trace_log_lvl+0x1a/0x2f
[<c04067b1>] show_trace+0x12/0x14
[<c0406835>] dump_stack+0x16/0x18
[<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
[<f94c0c9b>] bcm43xx_radio_set_txpower_bg+0x210/0x225 [bcm43xx]
[<f94c3a51>] bcm43xx_phy_init_pctl+0x20f/0x22c [bcm43xx]
[<f94c661e>] bcm43xx_phy_initg+0xc86/0xcf7 [bcm43xx]
[<f94c76b9>] bcm43xx_phy_init+0x60e/0x62c [bcm43xx]
[<f94b813f>] bcm43xx_chip_init+0x7d4/0xad0 [bcm43xx]
[<f94b9803>] wireless_core_up+0x187/0x682 [bcm43xx]
[<f94ba07b>] bcm43xx_select_wireless_core+0x37d/0x4fe [bcm43xx]
[<f94ba2f8>] bcm43xx_init_board+0x4a/0x124 [bcm43xx]
[<f94baa84>] bcm43xx_net_open+0xd/0xf [bcm43xx]
[<c05b4309>] dev_open+0x2e/0x66
[<c05b2c6d>] dev_change_flags+0x51/0xf1
[<c05bb01b>] rtnl_setlink+0x265/0x37e
[<c05ba624>] rtnetlink_rcv_msg+0x1b9/0x1dc
[<c05c6bf1>] netlink_run_queue+0x65/0xd1
[<c05ba421>] rtnetlink_rcv+0x29/0x42
[<c05c707c>] netlink_data_ready+0x15/0x56
[<c05c6061>] netlink_sendskb+0x1f/0x37
[<c05c694c>] netlink_unicast+0x1ab/0x1c5
[<c05c705b>] netlink_sendmsg+0x271/0x27d
[<c05aa077>] sock_sendmsg+0xe7/0x104
[<c05aa1e5>] sys_sendmsg+0x151/0x1af
[<c05ab1d0>] sys_socketcall+0x220/0x241
[<c040507c>] syscall_call+0x7/0xb
=======================
bcm43xx: Chip initialized
bcm43xx: 32-bit DMA initialized
bcm43xx: Keys cleared
bcm43xx: Selected 802.11 core (phytype 2)
PM: Adding info for No Bus:hw_random
bcm43xx: ASSERTION FAILED (radio_attenuation < 10) at: drivers/net/wireless/bcm43xx/bcm43xx_phy.c:1501:bcm43xx_find_lopair()
bcm43xx: WARNING: Writing invalid LOpair (low: -116, high: -34, index: 120)
[<c04061ed>] show_trace_log_lvl+0x1a/0x2f
[<c04067b1>] show_trace+0x12/0x14
[<c0406835>] dump_stack+0x16/0x18
[<f94c3c5f>] bcm43xx_phy_lo_adjust+0x1f1/0x22f [bcm43xx]
[<f94c4a5e>] bcm43xx_phy_lo_g_measure+0x8ca/0xaa6 [bcm43xx]
[<f94baf6b>] bcm43xx_periodic_work_handler+0x176/0x42b [bcm43xx]
[<c04350af>] run_workqueue+0x89/0x145
[<c0435abc>] worker_thread+0xf8/0x124
[<c043829f>] kthread+0xb3/0xdc
[<c0405cd7>] kernel_thread_helper+0x7/0x10
=======================
SoftMAC: Associate: Scanning for networks first.
SoftMAC: Associate: failed to initiate scan. Is device up?
bcm43xx: set security called, .level = 0, .enabled = 0, .encrypt = 0
SoftMAC: Scanning finished: scanned 14 channels starting with channel 1
SoftMAC: Queueing Authentication Request to 00:13:10:8a:ef:5f
SoftMAC: Cannot associate without being authenticated, requested authentication
SoftMAC: Sent Authentication Request to 00:13:10:8a:ef:5f.
17 years, 3 months
rawhide report: 20070318 changes
by Build System
Updated Packages:
gcc-4.1.2-5
-----------
* Sat Mar 17 2007 Jakub Jelinek <jakub(a)redhat.com> 4.1.2-5
- update from gcc-4_1-branch (-r122833:123011)
- PRs debug/29906, middle-end/30364, middle-end/30433, target/31123
- rebuilt against newer rpm to fix libgcj debuginfo (#232222)
Broken deps for s390
----------------------------------------------------------
systemtap - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
systemtap-runtime - 0.5.10-1.fc7.s390 requires kernel >= 0:2.6.9-11
17 years, 3 months
Network Manager does not regard network settings.
by Pasha R
When I installed FC7 test2, I specified a static IP address on my
Ethernet NIC. After installation, I also configured a PPPOE connection
to my ISP. But it looks like NetworkManager doesn't look at network
configuration and is trying to acquire an address from DHCP. When it
fails (as I don't have any DHCP servers at home), it configures my NIC
with some zero-conf IP address and deletes nameservers received from
my provider from /etc/resolf.conf? It there a way to make it to behave
more sanely, other than disabling it?
17 years, 3 months
missing repodata in mirrors?
by G.Wolfe Woodbury
With the recent change of position for the RPMs in the development repositories,
I've noticed that several mirrors do not have (any) valid repodata directories.
Has the main mirror ben updated to regen the repodata correctly for the new locations?
G.Wolfe Woodbury
17 years, 3 months
Massive ACPI Errors then hang
by Dwaine Garden
I'm getting ACPI warning in the message log. Anyone else see this? I'm also getting a lot of hanging where a reset power is the only option.
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a2ac [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a2e0 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a210 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a244 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a278 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a2ac [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a2e0 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a210 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a244 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a278 [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A0) in object f7c3a2ac [20070126]
Mar 13 18:01:10 www kernel: ACPI Warning (utdelete-0400): Large Reference Count (10A1) in object f7c3a2e0 [20070126]
Mar 14 01:42:19 www kernel: ACPI Exception (exoparg2-0442): AE_AML_PACKAGE_LIMIT, Index (0FFFFFFFF) is beyond end of object [20070126]
Mar 14 01:42:19 www kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PATA.GTF_] (Node c2b144e4), AE_AML_PACKAGE_LIMIT
Mar 14 01:42:19 www kernel: ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0.PATA.CHN0.DRV0._GTF] (Node c2b142e4), AE_AML_PACKAGE_LIMIT
17 years, 3 months
F7Test2: "Cannot mount volume" after my last update
by Guido Ledermann
Hi,
if I connect my USB disk I get an error message (graphically) saying
"Cannot mount volume"
Error org.freedektop.Hal.PermissionDenied
Details: Permission denied: Not in active session
Any hints? Anyone can cormirm this behaviour?
Guido
17 years, 3 months