rawhide report: 20060326 changes
by Build System
Updated Packages:
gnome-screensaver-2.14.0-2
--------------------------
* Sat Mar 25 2006 Ray Strode <rstrode(a)redhat.com> 2.14.0-2
- Add missing "c" to the word "Screensaver" in summary
(bug 186711).
net-snmp-5.3-6
--------------
* Sat Mar 25 2006 Radek Vokal <rvokal(a)redhat.com> 5.3-6
- use net.ipv6.neigh.lo.retrans_time_ms (#186546)
openoffice.org-1:2.0.2-5.5.3
----------------------------
* Fri Mar 24 2006 Caolan McNamara <caolanm(a)redhat.com> - 1:2.0.2-5.5
- rh#186515# Keep draw and math launchers for mimetypes
- rh#186215#/ooo#63583# accessibility crasher in impress
Broken deps for i386
----------------------------------------------------------
GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5
GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires kernel = 0:2.6.15-1.2054_FC5
GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
GFS-kernel-xen0 - 2.6.15.1-5.FC5.17.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.i686 requires kernel = 0:2.6.15-1.2054_FC5
cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
cman-kernel-xen0 - 2.6.15.1-0.FC5.16.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires kernel = 0:2.6.15-1.2054_FC5
dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
dlm-kernel-xen0 - 2.6.15.1-0.FC5.14.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.i686 requires kernel = 0:2.6.15-1.2054_FC5
gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
gnbd-kernel-xen0 - 2.6.15-5.FC5.23.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
Broken deps for ia64
----------------------------------------------------------
rgmanager - 1.9.31-3.ia64 requires ccs
Broken deps for ppc64
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
emacs - 21.4-5.ppc64 requires fonts-xorg-75dpi
geronimo-specs - 1.0-0.M2.2jpp_7fc.ppc64 requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.ppc64 requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
struts - 1.2.8-2jpp_9fc.ppc64 requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.ppc64 requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.ppc64 requires servletapi5
Broken deps for s390
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
geronimo-specs - 1.0-0.M2.2jpp_7fc.s390 requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.s390 requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
rhythmbox - 0.8.8-2.s390 requires libgstgconf-0.8.so.0
rhythmbox - 0.8.8-2.s390 requires libgstreamer-0.8.so.1
rhythmbox - 0.8.8-2.s390 requires libgstcontrol-0.8.so.1
struts - 1.2.8-2jpp_9fc.s390 requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390 requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.s390 requires servletapi5
xmlrpc - 2.0.1-1jpp_6fc.s390 requires servletapi5
Broken deps for s390x
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
geronimo-specs - 1.0-0.M2.2jpp_7fc.s390x requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.s390x requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
rhythmbox - 0.8.8-2.s390x requires libgstcontrol-0.8.so.1()(64bit)
rhythmbox - 0.8.8-2.s390x requires libgstgconf-0.8.so.0()(64bit)
rhythmbox - 0.8.8-2.s390x requires libgstreamer-0.8.so.1()(64bit)
struts - 1.2.8-2jpp_9fc.s390x requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390x requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.s390x requires servletapi5
Broken deps for x86_64
----------------------------------------------------------
GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
18 years, 1 month
My FC5 install experience
by nathan bullock
Here are just some comments about how my installation experience went.
On a second computer on the local network I:
Downloaded the 5 i386 CDs using bittorrent. The experience was much
nicer that how I normally have downloaded the iso cds in the past.
Burnt the first cd as my boot CD, then I mounted all 5 cds using:
mount -o loop -t iso9660 <isofilename> <mountpoint>
Pointed apache at these five isos so that all the contents of the 5
CDs were available at http://192.168.1.1/iso/disc[1-5]/...
On the computer that I was installing FC5.
Booted from disc1. At the prompt typed "linux askmethod", then chose
http and pointed it at http://192.168.1.1/iso
?? Two slight oddities at this point:
- At this point it said something like "Local installation media
found", this was a little disconcerting since I thought it was still
going to boot from the CD. This message could probably be a little
clearer.
- It also asks if you want to test your CDs. Why? You aren't
installing from CD?
After I picked all the appropriate settings it starts the install by
formatting my hard drive then promptly crashing. A dialog came up and
I was able to find out that it couldn't find
http://192.168.1.1/iso/disc1/Fedora/RPMS/gjdoc-0.27-3.1.i386.rpm. That
was because this file is actually on Disc2.
I was able to fix this with apache by doing:
RedirectMatch 301 /iso/disc1/Fedora/RPMS/gjdoc-0.7.7-3.1.i386.rpm
/iso/disc2/Fedora/RPMS/gjdoc-0.7.7-3.1.i386.rpm
On trying the install again it died again, this time on a different
file. This happened on a sequence of about four files then I decided
to copy all the rpms into one directory on my other machine and did:
RedirectMatch 301 /iso/disc1/Fedora/RPMS/(.*) /iso/RPMS/$1
RedirectMatch 301 /iso/disc2/Fedora/RPMS/(.*) /iso/RPMS/$1
RedirectMatch 301 /iso/disc3/Fedora/RPMS/(.*) /iso/RPMS/$1
RedirectMatch 301 /iso/disc4/Fedora/RPMS/(.*) /iso/RPMS/$1
RedirectMatch 301 /iso/disc5/Fedora/RPMS/(.*) /iso/RPMS/$1
After that the installation went smoothly.
And one question to finish off this email:
I want to do the http install but instead of burning the first disc to
a cd I would like to copy just a subset of that first CD to a USB key.
Can I do this? Which files would I need to put onto the USB key?
I also want to say thank you to everyone who helps with Fedora Core.
So far FC5 is looking pretty nice.
Nathan Bullock
18 years, 1 month
Re: FC5 with bcm43xx support (HOWTO)
by David Woodhouse
Cross-posting since I was planning to send something like this anyway. I
was going to wait till the kernel and bcm43xx-fwcutter were actually in
the repositories and thus skip the first couple of paragraphs, but since
I've been asked....
On Sat, 2006-03-25 at 03:13 +0100, Robert Allerstorfer wrote:
> are there any step-by-step instructions on how to enable bcm43xx
> support on Fedora Core 5 ppc? I think the default 2.6.15-1.2054_FC5
> kernel should be good.
If you haven't already done so, update to the 2.6.16-1.2071_FC5 or later
kernel, from http://people.redhat.com/davej/kernels/Fedora/FC5/ if it
isn't in the official repos yet. The bcm43xx driver _does_ work in the
2054 release kernel, and I've been using it like that for months, but
it's far less picky about its initialisation in 2071, and doesn't lose
the network every time NetworkManager scans -- so for the sake of the
HOWTO it's just easier if you upgrade. The improvements to the driver
_will_ be in the official kernel update when it eventually comes out.
Install the bcm43xx-fwcutter package from Extras. It's in extras-devel,
but not yet in extras-fc5 yet because my request to create the branch
hasn't been honoured yet. There's a copy of it at
http://david.woodhou.se/bcm43xx-fwcutter-003-2.ppc.rpm (there's also
i386 and src rpms there).
(By next week, hopefully the above will be reduced to
'yum update kernel ; yum install bcm43xx-fwcutter')
Then proceed as described
in /usr/share/doc/bcm43xx-fwcutter-003/README.Fedora:
As root, extract the firmware from your Windows or MacOS driver by
running the command
bcm43xx-fwcutter -w /lib/firmware <DRIVERFILE>
The README file in the same directory (not README.Fedora but just
README) contains a bunch of links to drivers if you don't have one.
Apparently, any of them should be OK; it doesn't matter which you use.
Load the driver by 'modprobe bcm43xx'. NetworkManager should work with
it, as should system-config-network and the standard initscripts.
WEP works, and according to my limited testing WPA works too, as long as
your AP is broadcasting its ESSID (that latter restriction seems to
apply to _many_ cards, in fact. There's a hack to work around it at
http://david.woodhou.se/wpa_supplicant-hack.patch)
We disabled the automatic loading of the bcm43xx driver in FC5 because
it's quite new and experimental, and partly because of the bugs which
have now been fixed in the 2071 kernel. To make sure the driver gets
loaded automatically, either add '/sbin/modprobe bcm43xx' to
your /etc/rc.local script, or copy the alias list
from /usr/share/doc/bcm43xx-fwcutter-003/modprobe.bcm43xx into
the /etc/modprobe.d directory, which tells the module loaded which PCI
IDs to associate with the bcm43xx driver.
Finally, give us feedback in bugzilla so we can know if/when we should
enable the driver by default again:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=186329
Please leave feedback even if it's working -- if the only people we hear
from are those who can't get it to work, then we're _never_ going to
enable it by default. :)
If you can't get it to work, try bringing it up by hand using 'ifconfig'
and 'iwconfig' commands, and show/attach the kernel output ('dmesg')
from when you do so. Also try adjusting the rate (iwconfig eth1 rate 2M)
and setting the SSID again. We already default to 11M, but that might
not be slow enough in some situations -- we don't automatically fall
back when the link is poor, so you have to set the speed manually.
--
dwmw2
18 years, 1 month
Argh! FC5 installation: Cannot install FC5 disk #4!
by Dan Thurman
Folks,
I am trying to install "everything" from the new FC5 release
and apparently, when you install "everything", i.e. everything
except Language, I had to insert disk 1 (of course) through to
all the CD's needed to complete the install...
Unfortunately, when FC5 asks for disk #4, it says:
"Please insert Fedora Core disc 4 to continue"
I put the FC5 #4 into the CD and pressed "OK"
This results in an error message:
"That's not the correct Fedora Core CDROM"
Ok... thinking that I burned CD #4 wrong (I checked
earlier that CD1-5 was valid) I burned another CD #4,
checked it, then put in into the CD drive and hit "OK"
Same error message was reported....
Sigh... now what... what can I do to complete
my installation?
Dan
18 years, 1 month
errata kernel
by Marcin Grabda
Hi.
I've got short question. When will be errata kernel for FC5 released?
Marcin.
18 years, 1 month
rawhide report: 20060325 changes
by Build System
Updated Packages:
audiofile-1:0.2.6-3
-------------------
* Fri Mar 24 2006 Matthias Clasen <mclasen(a)redhat.com> - 1:0.2.6-3
- Reduce memory consumption by making data tables const
coreutils-5.94-2
----------------
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 5.94-2
- 5.94.
cups-1:1.2-0.1.b2.6
-------------------
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 1:1.2-0.1.b2.6
- Add KDE compatibility symbols _ipp_add_attr/_ipp_free_attr to ipp.h, with
a comment saying why they shouldn't be used.
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 1:1.2-0.1.b2.5
- Fix KDE compatibility symbols _ipp_add_attr/_ipp_free_attr.
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 1:1.2-0.1.b2.4
- Update to svn snapshot.
db4-4.3.29-4
------------
* Fri Mar 24 2006 Jindrich Novy <jnovy(a)redhat.com> 4.3.29-4
- drop useless java, lfs patches
epiphany-2.14.0-1
-----------------
* Sun Mar 12 2006 Ray Strode <rstrode(a)redhat.com> - 2.14.0-1
- Update to 2.14.0
foomatic-3.0.2-34
-----------------
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 3.0.2-34
- Always use /usr/lib/cups/{backend,filter}.
gedit-1:2.14.1-1
----------------
* Thu Mar 16 2006 Matthias Clasen <mclasen(a)redhat.com> 2.14.1-1
- Update to 2.14.1
gthumb-2.7.5.1-2
----------------
* Fri Mar 24 2006 Matthias Clasen <mclasen(a)redhat.com> - 2.7.5.1-2
- Update to 2.7.5.1
hplip-0.9.9-7
-------------
* Fri Mar 24 2006 Tim Waugh <twaugh(a)redhat.com> 0.9.9-7
- Include hpfax.
- Build requires libusb-devel.
kernel-2.6.16-1.2088_FC6
------------------------
* Fri Mar 24 2006 David Woodhouse <dwmw2(a)redhat.com>
- Fix lockup when someone takes the bcm43xx device down while it's
scanning (#180953)
* Thu Mar 23 2006 Juan Quintela <quintela(a)redhat.com>
- disable sky2 (as it is broken upstream)
* Thu Mar 23 2006 Juan Quintela <quintela(a)redhat.com>
- fix xen to compile with 2.6.16-git6.
libsepol-1.12.2-1
-----------------
* Fri Mar 24 2006 Dan Walsh <dwalsh(a)redhat.com> 1.12.2-1
- Upgrade to latest from NSA
* Fixed avrule_block_write num_decls endian bug.
* Fri Mar 17 2006 Dan Walsh <dwalsh(a)redhat.com> 1.12.1-1
- Upgrade to latest from NSA
* Fixed sepol_module_package_write buffer overflow bug.
* Fri Mar 10 2006 Dan Walsh <dwalsh(a)redhat.com> 1.12-2
- Upgrade to latest from NSA
* Updated version for release.
* Merged cond_evaluate_expr fix from Serge Hallyn (IBM).
* Fixed bug in copy_avrule_list reported by Ivan Gyurdiev.
* Merged sepol_policydb_mls_enabled interface and error handling
changes from Ivan Gyurdiev.
mtr-2:0.71-1
------------
* Fri Mar 24 2006 Miroslav Lichvar <mlichvar(a)redhat.com> - 2:0.71-1
- update to mtr-0.71
selinux-policy-2.2.26-1
-----------------------
* Wed Mar 22 2006 Dan Walsh <dwalsh(a)redhat.com> 2.2.25-3
- Fix policyhelp
smartmontools-1:5.33-7
----------------------
* Fri Mar 24 2006 Tomas Mraz <tmraz(a)redhat.com> - 1:5.33-7
- add missing quotes to /etc/sysconfig/smartmontools
squirrelmail-1.4.6-4.fc6
------------------------
* Fri Mar 24 2006 Warren Togami <wtogami(a)redhat.com> 1.4.6-4
- Fix outgoing Japanese mail to iso-2022-jp for now (#185767)
xinetd-2:2.3.14-2
-----------------
* Fri Mar 24 2006 Jay Fenlason <fenlason(a)redhat.com> 2:2.3.14-2
- Upgrade to new upstream version. This obsoletes the -libwrap,
-rpc, -banner, -bug140084 and -gcc4 patches.
Broken deps for i386
----------------------------------------------------------
GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5
GFS-kernel - 2.6.15.1-5.FC5.17.i686 requires kernel = 0:2.6.15-1.2054_FC5
GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
GFS-kernel-smp - 2.6.15.1-5.FC5.17.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
GFS-kernel-xen0 - 2.6.15.1-5.FC5.17.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
GFS-kernel-xenU - 2.6.15.1-5.FC5.17.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.i686 requires kernel = 0:2.6.15-1.2054_FC5
cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
cman-kernel-smp - 2.6.15.1-0.FC5.16.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
cman-kernel-xen0 - 2.6.15.1-0.FC5.16.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
cman-kernel-xenU - 2.6.15.1-0.FC5.16.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.i686 requires kernel = 0:2.6.15-1.2054_FC5
dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
dlm-kernel-smp - 2.6.15.1-0.FC5.14.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
dlm-kernel-xen0 - 2.6.15.1-0.FC5.14.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
dlm-kernel-xenU - 2.6.15.1-0.FC5.14.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.i686 requires kernel = 0:2.6.15-1.2054_FC5
gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5smp
gnbd-kernel-smp - 2.6.15-5.FC5.23.i686 requires kernel-smp = 0:2.6.15-1.2054_FC5
gnbd-kernel-xen0 - 2.6.15-5.FC5.23.i686 requires kernel-xen0 = 0:2.6.15-1.2054_FC5
gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires /lib/modules/2.6.15-1.2054_FC5xenU
gnbd-kernel-xenU - 2.6.15-5.FC5.23.i686 requires kernel-xenU = 0:2.6.15-1.2054_FC5
Broken deps for ia64
----------------------------------------------------------
rgmanager - 1.9.31-3.ia64 requires ccs
Broken deps for ppc64
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
emacs - 21.4-5.ppc64 requires fonts-xorg-75dpi
geronimo-specs - 1.0-0.M2.2jpp_7fc.ppc64 requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.ppc64 requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
struts - 1.2.8-2jpp_9fc.ppc64 requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.ppc64 requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.ppc64 requires servletapi5
Broken deps for s390
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
geronimo-specs - 1.0-0.M2.2jpp_7fc.s390 requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.s390 requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
rhythmbox - 0.8.8-2.s390 requires libgstgconf-0.8.so.0
rhythmbox - 0.8.8-2.s390 requires libgstreamer-0.8.so.1
rhythmbox - 0.8.8-2.s390 requires libgstcontrol-0.8.so.1
struts - 1.2.8-2jpp_9fc.s390 requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390 requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.s390 requires servletapi5
xmlrpc - 2.0.1-1jpp_6fc.s390 requires servletapi5
Broken deps for s390x
----------------------------------------------------------
avalon-logkit - 1.2-3jpp_3fc.noarch requires servletapi5
castor-demo - 0.9.5-1jpp_2fc.noarch requires servletapi5
geronimo-specs - 1.0-0.M2.2jpp_7fc.s390x requires servletapi5
hsqldb - 1.80.1-1jpp_8fc.s390x requires servletapi5
jakarta-commons-fileupload - 1:1.0-3jpp_5fc.noarch requires servletapi5
jakarta-taglibs-standard - 1.1.1-4jpp_3fc.noarch requires servletapi5 >= 0:5.0.16
rhythmbox - 0.8.8-2.s390x requires libgstcontrol-0.8.so.1()(64bit)
rhythmbox - 0.8.8-2.s390x requires libgstgconf-0.8.so.0()(64bit)
rhythmbox - 0.8.8-2.s390x requires libgstreamer-0.8.so.1()(64bit)
struts - 1.2.8-2jpp_9fc.s390x requires servletapi5
struts-webapps-tomcat5 - 1.2.8-2jpp_9fc.s390x requires tomcat5
velocity - 1.4-3jpp_4fc.noarch requires servletapi5
xalan-j2-demo - 2.6.0-3jpp_9fc.s390x requires servletapi5
Broken deps for x86_64
----------------------------------------------------------
GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
GFS-kernel - 2.6.15.1-5.FC5.17.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
cman-kernel - 2.6.15.1-0.FC5.16.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
dlm-kernel - 2.6.15.1-0.FC5.14.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires /lib/modules/2.6.15-1.2054_FC5
gnbd-kernel - 2.6.15-5.FC5.23.x86_64 requires kernel = 0:2.6.15-1.2054_FC5
18 years, 1 month
FC5 isn't working on laptop
by Andrew Mackey
Hi All!
I have tried installing FC5 x64 on my Turion 64 laptop. FC5 successfully
installs without any problems. It then goes for the first initial startup
and everything works fine. It then asks for you to finish setting up the
laptop by entering a user in, testing the sound, etc. Well, after you
finish that, the laptop goes to a black screen and is non-responsive. I was
unable to do anything. I tried seeing if it was just the video by pressing
CTRL-ALT-BACKSPACE and even tried going to another terminal by pressing
CTRL-ALT-F1 thru F7. Nothing. Is there something more that I need to be
doing?
Thanks!
Andrew Mackey
amackey [at] netidex.com
18 years, 1 month