system-config-mouse
by Michal Jaegermann
Fairly recently system-config-mouse vanished from development
packages. Was this a deliberate decision and if yes then what I am
supposed to use now to configure mouse properties? It does not
look that there something which takes over these functions. Did I
miss it?
Michal
18 years, 7 months
gcc-4.0.1-14 problem ?
by Ernest L. Williams Jr.
Hi,
The following code fragment is now causing problems under gcc 4.0.1
Basically, I have "gcc version 4.0.1 20050919 (Red Hat 4.0.1-14)" from
rawhide.
Everything is perfect under "gcc version 3.4.3"
Any recommended work-arounds?
================= code fragment======================================
#ifndef __LOC_PV_FACTORY_H__
#define __LOC_PV_FACTORY_H__
line 10 --> #include "pv_factory.h"
line 11 -->
line 12 --> class LOC_PV_Factory : public PV_Factory
line 13 --> {
line 14 --> public:
line 15 --> LOC_PV_Factory();
line 16 --> ~LOC_PV_Factory();
line 17 --> ProcessVariable *create(const char *PV_name);
line 18 --> private:
line 19 --> friend class LOC_ProcessVariable;
line 20 --> static void forget(LOC_ProcessVariable *pv);
line 21 --> };
=====================================================================
Here is the error and it only happens under gcc 4.0.1:
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
-I/usr/X11R6/include/X11 ../loc_pv_factory.cc
../loc_pv_factory.h:20: error: ‘LOC_ProcessVariable’ has not been
declared
../loc_pv_factory.cc:118: error: prototype for ‘void
LOC_PV_Factory::forget(LOC_ProcessVariable*)’ does not match any in
class ‘LOC_PV_Factory’
../loc_pv_factory.h:20: error: candidate is: static void
LOC_PV_Factory::forget(int*)
../loc_pv_factory.cc: In destructor ‘virtual
LOC_ProcessVariable::~LOC_ProcessVariable()’:
../loc_pv_factory.cc:257: error: cannot call member function ‘void
LOC_PV_Factory::forget(LOC_ProcessVariable*)’ without object
make[1]: *** [loc_pv_factory.o] Error 1
make[1]: Leaving directory
`/ade/epics/supTop/extensions/src/edm/lib/O.linux-x86'
make: *** [install.linux-x86] Error 2
[williams@matrix lib]$
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Thanks,
Ernesto
18 years, 7 months
anacron daily - prelink line 47 error
by Jim Cornette
Has anyone seen this entry in system mail? I have prelink-0.3.6-1 and
anacron-2.3-34 installed.
Subject: Anacron job 'cron.daily'
/etc/cron.daily/prelink:
/etc/cron.daily/prelink: line 47: 28738 Aborted
+/usr/sbin/prelink -av $PRELINK_OPTS >>/var/log/prelink.log 2>&1
Jim
--
QOTD:
If it's too loud, you're too old.
18 years, 7 months
rpmnew & rpmsave
by Justin Conover
How do you implement this in a spec file?
If file is here and there are changes, either replace it and create
filename.save, or keep the old and create filename.rpmnew
Thank you,
18 years, 7 months
Fedora Core 4 Test Update: xmltex-20020625-5.1
by Tim Waugh
---------------------------------------------------------------------
Fedora Test Update Notification
FEDORA-2005-899
2005-09-20
---------------------------------------------------------------------
Product : Fedora Core 4
Name : xmltex
Version : 20020625
Release : 5.1
Summary : Namespace-aware XML parser written in TeX.
Description :
Namespace-aware XML parser written in TeX.
---------------------------------------------------------------------
Update Information:
A problem with building the TeX format file has been corrected.
---------------------------------------------------------------------
* Tue Sep 20 2005 Tim Waugh <twaugh(a)redhat.com> 20020625-5.1
- Build fmt file using &latex not &hugelatex (bug #168728).
---------------------------------------------------------------------
This update can be downloaded from:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/
54443d3c78e1608c796e7ccf013331a8 SRPMS/xmltex-20020625-5.1.src.rpm
a6b8c827b7c41f5572afe79bed23b213 x86_64/xmltex-20020625-5.1.noarch.rpm
a6b8c827b7c41f5572afe79bed23b213 i386/xmltex-20020625-5.1.noarch.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command. You may
need to edit your up2date channels configuration. Within
/etc/sysconfig/rhn/sources enable the following line:
yum updates-testing http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4...
---------------------------------------------------------------------
18 years, 7 months
Fedora Core 4 Test Update: hplip-0.9.5-1.1
by Tim Waugh
---------------------------------------------------------------------
Fedora Test Update Notification
FEDORA-2005-635
2005-09-20
---------------------------------------------------------------------
Product : Fedora Core 4
Name : hplip
Version : 0.9.5
Release : 1.1
Summary : HP Linux Imaging and Printing Project
Description :
The Hewlett-Packard Linux Imaging and Printing Project provides
drivers for HP printers and multi-function peripherals.
---------------------------------------------------------------------
Update Information:
Test package of the Hewlett-Packard Linux Imaging Project.
---------------------------------------------------------------------
* Mon Sep 19 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.5-1.1
- Build for Fedora Core 4.
- Fix compile errors.
- 0.9.5.
- No longer need condrestart patch.
* Tue Jul 26 2005 Tim Waugh <twaugh(a)redhat.com>
- Fix condrestart in the initscript.
* Mon Jul 25 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.4-1.1
- Build for Fedora Core 4.
- Use 'condrestart' not 'restart' in %post scriptlet.
* Fri Jul 22 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.4-1
- forward-decl patch not needed.
- 0.9.4.
* Fri Jul 1 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-8
- Removed Obsoletes: hpoj tags (bug #162222).
* Thu Jun 30 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-7
- Rebuild to get Python modules precompiled.
* Wed Jun 22 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-6
- For libsane-hpaio ExcludeArch: s390 s390x, because it requires
sane-backends.
* Wed Jun 15 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-5
- Use static IP ports (for SELinux policy).
* Tue Jun 14 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-4
- Conflicts: hpijs from before this package provided it.
- Conflicts: system-config-printer < 0.6.132 (i.e. before HPLIP support
was added)
* Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-3
- Added Obsoletes: for xojpanel and hpoj-devel (but we don't actually package
devel files yet).
* Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-2
- Add 'hpaio' to SANE config file, not 'hpoj' (bug #159954).
* Thu Jun 9 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-1
- Use /usr/share/applications for putting desktop files in (bug #159932).
- Requires PyQt (bug #159932).
* Tue Jun 7 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.3-0.1
- Initial package, based on Mandriva spec file.
---------------------------------------------------------------------
This update can be downloaded from:
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4/
c2362084e12eeae33a551f7fbd041707 SRPMS/hplip-0.9.5-1.1.src.rpm
f6286a3cbe31785181c25319415e2004 ppc/hplip-0.9.5-1.1.ppc.rpm
89d489c85267ac1a6feec1502874c7a4 ppc/hpijs-0.9.5-1.1.ppc.rpm
44134e5d4664687b7f6f17a4fda946be ppc/libsane-hpaio-0.9.5-1.1.ppc.rpm
37129d21ef8e201b15baa19f08fedd90 ppc/debug/hplip-debuginfo-0.9.5-1.1.ppc.rpm
b285beb4af83ce2ed3bd3240c4d82697 x86_64/hplip-0.9.5-1.1.x86_64.rpm
5a27edc985a7a386d5b5d480ced8daa9 x86_64/hpijs-0.9.5-1.1.x86_64.rpm
33073aa6839eeb7e111519864e311b10 x86_64/libsane-hpaio-0.9.5-1.1.x86_64.rpm
a900f39b59679b50b9b560134b66648d x86_64/debug/hplip-debuginfo-0.9.5-1.1.x86_64.rpm
ccebf0c939f0dcf3c0ee7d05c8a8d0b0 i386/hplip-0.9.5-1.1.i386.rpm
43f8d417760216aa7989a0b60242f6f5 i386/hpijs-0.9.5-1.1.i386.rpm
4a6c3ca2e320ef46b300cfb760eddbb4 i386/libsane-hpaio-0.9.5-1.1.i386.rpm
82160aeeadfabb98ea9e4dab3b934023 i386/debug/hplip-debuginfo-0.9.5-1.1.i386.rpm
This update can also be installed with the Update Agent; you can
launch the Update Agent with the 'up2date' command. You may
need to edit your up2date channels configuration. Within
/etc/sysconfig/rhn/sources enable the following line:
yum updates-testing
http://download.fedora.redhat.com/pub/fedora/linux/core/updates/testing/4...
---------------------------------------------------------------------
18 years, 7 months
usb hard drive: messages when pluggin in
by Tom London
Running today's rawhide:
When I plug in a USB hardrive, I get the following messages. The drive
has 3 partitions: first is NTFS, second is EXT3, third is LVM (ext3
inside).
ext3 partition seems properly mounted on /media/usbdisk1.
tom
Sep 20 08:34:07 localhost kernel: usb 1-1: new high speed USB device
using ehci_hcd and address 7
Sep 20 08:34:07 localhost kernel: SCSI subsystem initialized
Sep 20 08:34:07 localhost kernel: Initializing USB Mass Storage driver...
Sep 20 08:34:07 localhost kernel: scsi0 : SCSI emulation for USB Mass
Storage devices
Sep 20 08:34:07 localhost kernel: usbcore: registered new driver usb-storage
Sep 20 08:34:07 localhost kernel: USB Mass Storage support registered.
Sep 20 08:34:12 localhost kernel: Vendor: TOSHIBA Model: MK8026GAX
Rev: 0811
Sep 20 08:34:12 localhost kernel: Type: Direct-Access
ANSI SCSI revision: 00
Sep 20 08:34:12 localhost kernel: SCSI device sda: 156301488 512-byte
hdwr sectors (80026 MB)
Sep 20 08:34:12 localhost kernel: sda: assuming drive cache: write through
Sep 20 08:34:12 localhost kernel: SCSI device sda: 156301488 512-byte
hdwr sectors (80026 MB)
Sep 20 08:34:12 localhost kernel: sda: assuming drive cache: write through
Sep 20 08:34:12 localhost kernel: sda: sda1 sda2 sda3
Sep 20 08:34:12 localhost kernel: Attached scsi disk sda at scsi0,
channel 0, id 0, lun 0
Sep 20 08:34:12 localhost udev[3771]: import_file_into_env: can't open
'/sbin/path_id /block/sda'
Sep 20 08:34:13 localhost udev[3783]: import_file_into_env: can't open
'/sbin/vol_id --export /dev/.tmp-8-1'
Sep 20 08:34:13 localhost udev[3784]: import_file_into_env: can't open
'/sbin/vol_id --export /dev/.tmp-8-2'
Sep 20 08:34:13 localhost udev[3785]: import_file_into_env: can't open
'/sbin/vol_id --export /dev/.tmp-8-3'
Sep 20 08:34:13 localhost fstab-sync[3806]: added mount point
/media/usbdisk for /dev/sda1
Sep 20 08:34:13 localhost fstab-sync[3813]: added mount point
/media/usbdisk1 for /dev/sda2
Sep 20 08:34:13 localhost kernel: kjournald starting. Commit interval
5 secondsSep 20 08:34:13 localhost kernel: EXT3 FS on sda2, internal
journal
Sep 20 08:34:13 localhost kernel: EXT3-fs: mounted filesystem with
ordered data mode.
Sep 20 08:34:13 localhost udevd[692]: get_netlink_msg: no ACTION in
payload found, skip event 'mount'
Sep 20 08:34:13 localhost kernel: SELinux: initialized (dev sda2, type
ext3), uses xattr
--
Tom London
18 years, 7 months
rawhide report: 20050920 changes
by Build System
New package libiec61883
Streaming library for IEEE1394
Updated Packages:
anaconda-10.3.0.23-1
--------------------
* Mon Sep 19 2005 Jeremy Katz <katzj(a)redhat.com> - 10.3.0.23-1
- fix a silly typo that would cause tracebacks
- Look for help in /tmp/updates too (#168155)
- Add skge driver (#168590)
- Some fixes to hopefully get x86_64 trees working
bogl-0:0.1.18-10
----------------
* Tue Sep 20 2005 Miloslav Trmac <mitr(a)redhat.com> - 0:0.1.18-10
- Simplify overzealous bogl-0.1.18-1.1.sigchld.patch
* Tue Sep 20 2005 Miloslav Trmac <mitr(a)redhat.com> - 0:0.1.18-9
- Update to bogl-0.1.18-1.1
- Don't ship unused ucs fonts in the SRPM
- Remove obsolete URL: (#168673)
doxygen-1:1.4.4-2
-----------------
* Mon Sep 19 2005 Than Ngo <than(a)redhat.com> 1:1.4.4-2
- move doxywizard man page to subpackge doxywizard
file-4.15-3
-----------
* Mon Sep 19 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-3
- small fix in previously added patch, now it works for multiple params
* Mon Sep 19 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-2
- print xxx-style only once (#168617)
* Tue Aug 09 2005 Radek Vokal <rvokal(a)redhat.com> - 4.15-1
- upgrade to upstream
gcc-4.0.1-14
------------
* Mon Sep 19 2005 Jakub Jelinek <jakub(a)redhat.com> 4.0.1-14
- update from CVS
- PRs c++/16171, c++/21135, c++/21514, c++/23139, c++/23624, c++/23691,
c++/23789, c++/23839, c++/23841, c++/23842, c++/23896, c++/23914,
c++/9782, debug/20998, debug/23190, debug/23806, fortran/16511,
fortran/17917, fortran/18870, fortran/18878, fortran/19358,
fortran/20848, fortran/22304, fortran/22502, fortran/23270,
fortran/23765, libfortran/19872, libfortran/23262, libfortran/23419,
libfortran/23784, libgcj/22211, libgcj/23549, libgcj/23662,
libgcj/23739, libstdc++/23358, libstdc++/23417, target/23747,
target/23774, tree-optimization/22348
- fix libstdc++ ostream oct and hex formatting logic
(Paolo Carlini, Janis Johnson, #168205, PR libstdc++/23871)
- fix fortran ENTRY handling when ENTRY symbol is passed
to a function (PR fortran/23663)
- make sure dominance info is computed in stdarg pass
(PR tree-optimization/23818)
- workaround for stack smashing in Java's fdlibm
(Tom Tromey, #166657, PR classpath/23863)
hplip-0.9.5-2
-------------
* Mon Sep 19 2005 Tim Waugh <twaugh(a)redhat.com> 0.9.5-2
- 0.9.5.
- No longer need condrestart patch.
- Fix compile errors.
kernel-2.6.13-1.1561_FC5
------------------------
kudzu-1.2.7-1
-------------
* Mon Sep 19 2005 Bill Nottingham <notting(a)redhat.com> 1.2.7-1
- fix fbProbe to work with X drivers, not card entries
- fix crash in matchNetDevices (#168689)
libidn-0.5.19-1
---------------
* Mon Sep 19 2005 Joe Orton <jorton(a)redhat.com> 0.5.19-1
- update to 0.5.19
libsetrans-0.1.6-1
------------------
* Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 0.1.6-1
- Fix memory problem
logwatch-6.1.2-4
----------------
* Mon Sep 19 2005 Ivana Varekova <varekova(a)redhat.com> 6.1.2-4
- fixed secure script (part of bug 141116, added a few
unknown logs)
- bug 168469 - fixed up2date script
lsof-4.76-1
-----------
* Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 4.76-1
- new upstream version
neon-0.24.7-7
-------------
* Mon Sep 19 2005 Joe Orton <jorton(a)redhat.com> 0.24.7-7
- drop static libs, doc/html from devel docdir
selinux-policy-strict-1.27.1-3
------------------------------
* Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 1.27.1-3
- Add yppasswdd policy
- Change ftpd_anon_t to public_content_t
selinux-policy-targeted-1.27.1-3
--------------------------------
* Mon Sep 19 2005 Dan Walsh <dwalsh(a)redhat.com> 1.27.1-3
- Add yppasswdd policy
- Change ftpd_anon_t to public_content_t
sendmail-8.13.5-1
-----------------
* Mon Sep 19 2005 Thomas Woerner <twoerner(a)redhat.com> 8.13.5-1
- new version 8.13.5
- fixed email address in changelog
* Fri May 06 2005 Thomas Woerner <twoerner(a)redhat.com> 8.13.4-2
- using new certificates directory /etc/pki/tls/certs
* Wed Apr 27 2005 Thomas Woerner <twoerrner(a)redhat.com> 8.13.4-1.1
- added configuration example for Cyrus-IMAPd to sendmail.mc (#142001)
Thanks to Alexander Dalloz
sudo-1.6.8p9-4
--------------
* Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 1.6.8p9-4
- fix debuginfo
* Mon Sep 19 2005 Karel Zak <kzak(a)redhat.com> 1.6.8p9-3
- fix #162623 - sesh hangs when child suspends
* Mon Aug 01 2005 Dan Walsh <dwalsh(a)redhat.com> 1.6.8p9-2
- Add back in interfaces call, SELinux has been fixed to work around
xchat-1:2.4.5-1
---------------
* Mon Sep 19 2005 Christopher Aillon <caillon(a)redhat.com> 1:2.4.5-1
- X-Chat 2.4.5
Broken deps for ia64
----------------------------------------------------------
libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.1.3)
libsetrans - 0.1.6-1.ia64 requires libc.so.6
libsetrans - 0.1.6-1.ia64 requires libselinux.so.1
libsetrans - 0.1.6-1.ia64 requires libdl.so.2
libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.3)
libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.1)
libsetrans - 0.1.6-1.ia64 requires libc.so.6(GLIBC_2.0)
Broken deps for ppc64
----------------------------------------------------------
libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.1.3)
libsetrans - 0.1.6-1.ppc64 requires libc.so.6
libsetrans - 0.1.6-1.ppc64 requires libselinux.so.1
libsetrans - 0.1.6-1.ppc64 requires libdl.so.2
libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.3)
libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.1)
libsetrans - 0.1.6-1.ppc64 requires libc.so.6(GLIBC_2.0)
18 years, 7 months
grub can't access system
by korgull
Hi,
I'm having one hell of a problem with my system after I tired to upgrade.
Finally I reinstalled the system and moved my root partition to another
partition in order to save the data on the old partition (I didn't reformat
this partition during the reinstall, all other partions I reformated).
Now grub boots with only a lot of "GRUB" on my screen and I can't access the
installed FC4 system.
My main harddisk is at /dev/sda and the current boot partition is /dev/sda5
(which is in an extended partition). My old boot partition was /dev/sda2
which for some reason is still found by the rescue disk as a valid boot
partition, although I have cleared all directories except my data from it
(how can I clear this ?)
I also have an IDE drive installed as /dev/hda. I use this only for data and
don't want to boot from it. I hope that's fine with grub.....
I tried to reinstall grub by using grub-install, but it won't work.
Is there any way to fix this issue ?
Regards,
Marcel
18 years, 7 months
Re: yum/kudzu/kernel problem
by Rick Marshall
i'd like to stick with the new kernel - when i have a network cable i do
that, but the problem comes back to the madwifi drivers :(
at this stage i only have .12 modules.
hmmm...... back to source code? i know this is a perma thread, but will
downloading from kernel.org be good enough?
thanks
rick
18 years, 7 months