RE: ASUS P4P series Motherboards
by Kehl.DR@forces.gc.ca
Updated Bios, turned off IDE Raid and SATA, and the install well after that
except it didn't write the bootloader to the drive.
Cheers
-----Original Message-----
From: Tarjei Knapstad [mailto:tarjei.knapstad@predichem.com]
Sent: Tuesday, 5, April, 2005 01:41 AM
To: For testers of Fedora Core development releases
Subject: RE: ASUS P4P series Motherboards
On Mon, 2005-04-04 at 20:52, Kehl.DR(a)forces.gc.ca wrote:
> I attempted to install it on both my P4P800 Deluxe and P4P800E Deluxe and
it
> fails continuously on both. It reports it is disabling IRQ 5 and then that
> nobody cares and continues to disable it time and time again before
failing.
>
Hi Don,
It's been a while, but I seem to remember having the exact same problem
when installing FC3 on my P4P800 Deluxe.
IIRC everything went fine after turning off "enhanced IDE mode" or
something like that in the BIOS.
Let me know if you manage to figure it out from here - if not I'll try
to get you more specific details.
Regards,
--
Tarjei
--
fedora-test-list mailing list
fedora-test-list(a)redhat.com
To unsubscribe:
http://www.redhat.com/mailman/listinfo/fedora-test-list
19 years, 1 month
gnome keyring password - optional?
by Msquared
Is it possible to set an empty password on my gnome keyring?
I know it's a security risk, but here's my rationale:
I have some Windows machines on my network, and for some obscure reason
they ask me for a username and password in nautilus when I access them.
Another Windows machine accessing them doesn't have to supply a password
(or perhaps the password is hardcoded in Windows). To access the Windows
share I just use the username Guest and the password Guest.
The point is that the username and password are not really secrets,
they're just another annoying thing to type to get access to an
effectively public resource in my network.
I want to be able to access the shares without typing in anything, even to
gnone, and even once per session. I'm slack. :-)
Regards, Msquared...
19 years, 1 month
Updates fails with errors using yum.
by Richard Ramson
I'm trying to update FC4T1 on a server at work, with a firewall and
proxy in place, and I'm running into problems. When I run yum update
or yum update somepackagename, I get the following error:
yum update acl
Setting up Update Process
Setting up Repos
Traceback (most recent call last):
File "/usr/bin/yum", line 15, in ?
yummain.main(sys.argv[1:])
File "/usr/share/yum-cli/yummain.py", line 72, in main
result, resultmsgs = do()
File "/usr/share/yum-cli/cli.py", line 462, in doCommands
return self.updatePkgs()
File "/usr/share/yum-cli/cli.py", line 956, in updatePkgs
self.doRepoSetup()
File "/usr/share/yum-cli/cli.py", line 79, in doRepoSetup
repo.baseurlSetup()
File "repos.py", line 466, in baseurlSetup
File "repos.py", line 718, in getMirrorList
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
444, in urlopen
return default_grabber.urlopen(url, **kwargs)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
575, in urlopen
return self._retry(opts, retryfunc, url)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
547, in _retry
return apply(func, (opts,) + args, {})
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
574, in retryfunc
return URLGrabberFileObject(url, filename=None, opts=opts)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
727, in __init__
self._do_open()
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
794, in _do_open
fo, hdr = self._make_request(req, opener)
File "/usr/lib/python2.4/site-packages/urlgrabber/grabber.py", line
885, in _make_request
fo = opener.open(req)
File "/usr/lib/python2.4/urllib2.py", line 358, in open
response = self._open(req, data)
File "/usr/lib/python2.4/urllib2.py", line 376, in _open
'_open', req)
File "/usr/lib/python2.4/urllib2.py", line 337, in _call_chain
result = func(*args)
File "/usr/lib/python2.4/urllib2.py", line 573, in <lambda>
lambda r, proxy=url, type=type, meth=self.proxy_open: \
File "/usr/lib/python2.4/urllib2.py", line 580, in proxy_open
if '@' in host:
TypeError: iterable argument required
I ran the export ftp_proxy=proxy.company.com:80
http_proxy=proxy.company.com:80 and https_proxy=proxy.company.com:80.
I also setup the Redhat Network Configuration with Enable HTTP Proxy:
proxy.company.com:80. Should I be using port 80 or is there some
other reason this is failling?
19 years, 1 month
Control-Alt-Fn Problem - REPOST
by Dr J Austin
Hi All
I have just installed FC4T1 x86-64 on Ext USB disk
Only problem being installing a boot loader, don't trust it! The options
don't seem correct.
I selected Do not install boot loader!!!
I then did a mkinitrd and grub setup by hand to USB disk
after install complete.
Clean boot from USB without touching MBR of main disk.
Usual gdm problem but as I use kdm ...
Need to edit /etc/X11/xdm/kdmrc to permit root login !!!!
2nd occurrence of AllowRootLogin for anybody interested.
However Cont-Alt-Fn to switch to a dumb virtual terminal
causes the graphics to fail.
The screen/keyboard is active and you can log in blind,
mingetty running OK, but not very useful with nothing to see.
Suspect that the graphics resolution/scan rates not supported by LCD
monitor but not certain. Seems odd as...
The main disk of the machine runs FC3 x86-64 with no such problems
Graphics card is very standard Matrox G550
Monitor Iiyama AS4314UT
Has anyone seen this problem or know where the default settings
are for the virtual terminals?
Thanks
John
##############################################################
Additional Info
I still cannot get the display to work on virtual terms 1 to 6.
I have tried
yum install xorg-x11*
to the latest development version, not to be recommended as
the screen became unreadable at run level 5 and still fails
with Cont-Aft-Fn !!!!
Managed to get it back to the DVD release - just.
Is it time to submit a Bugzilla.
Advice welcome !!!!
John
19 years, 1 month
FC4t1 - gnome-volume-manager uses 100% CPU if automounting an SD/MMC/CF card in USB card reader
by Msquared
I have an Apacer MegaSteno USB 2.0 7-in-1 card reader. One of the neat
things about this is that it claims to support Linux. It tells you what
minimum kernel version you need, and how to modify the kernel config to
allow the kernel to see all three slots on it.
The device worked well under FC1.
While testing FC4t1, I have also discovered the joy of autodetection of
USB drives, USB card readers, and cards plugged into USB card readers,
plus the automounting of all of the above. Awesome!
I have discovered one problem, though. Although automounting of USB
drives works well, inserting a MMC, SD, or CF card into the abovementioned
card reader automounts the first time, but not on subsequent insertions.
I also discovered that after this occurs, nothing else will automount,
either.
When I insert an MMC, SD, or CF card into the reader, gnome-volume-manager
starts using up 100% CPU, so I have to kill it. If I re-run it from the
commandline, automounting starts working again (for other devices) until I
insert an MMC, SD, or CF card again.
If I remove the card reader, insert the card into the card reader, then
plug it back into the USB port, the behaviour is the same.
Regards, Msquared...
19 years, 1 month
RE: ASUS P4P series Motherboards
by Kehl.DR@forces.gc.ca
I attempted to install it on both my P4P800 Deluxe and P4P800E Deluxe and it
fails continuously on both. It reports it is disabling IRQ 5 and then that
nobody cares and continues to disable it time and time again before failing.
Cheers
Don
-----Original Message-----
From: Jesse Keating [mailto:jkeating@j2solutions.net]
Sent: Monday, 4, April, 2005 11:36 AM
To: fedora-test-list(a)redhat.com
Subject: Re: ASUS P4P series Motherboards
On Mon, 2005-04-04 at 12:19 -0400, Kehl.DR(a)forces.gc.ca wrote:
> I have noticed many people complaining about the inability to install
> Fedora
> on the ASUS P4P series of motherboards.
> Unfortunately I have built all my machines around the P4P series and
> was
> looking at migrating to Fedora. Has anyone had any success with Core 4
> test
> 1?
There was a problem around the Fedora Core 2 phase, a kernel regression
that effected the installer, but not the installed system. This problem
was long ago fixed.
--
Jesse Keating RHCE (geek.j2solutions.net)
Fedora Legacy Team (www.fedoralegacy.org)
GPG Public Key (geek.j2solutions.net/jkeating.j2solutions.pub)
Was I helpful? Let others know:
http://svcs.affero.net/rm.php?r=jkeating
--
fedora-test-list mailing list
fedora-test-list(a)redhat.com
To unsubscribe:
http://www.redhat.com/mailman/listinfo/fedora-test-list
19 years, 1 month
Semi-successful text-mode (sorry) install of FC4test1 on Athlon64
by Telsa Gwynne
Hello, test-list,
One install attempt report.
Text install of Fedora Core 4 test 1 onto an Athlon64 (so x86_64)
with a Radeon 9000 and no whacky hardware. Only reason for the text
install was the lack of a mouse when I started. The install appeared
to go really smoothly, quickly and successfully, but, in retrospect,
I should have found a mouse earlier.
Two big issues for me:
* firstboot did not run on completion of the install (solution is
to install gnome-python2-gnomevfs, incidentally)
* for some reason the text install did not ask me what language I
wanted the machine to run in, although it did ask what language I
wanted the installer to run in. On first login. it declared my
locale to be POSIX. Urrr.. :)
So, bugs:
Found someone had already bugzilla'd:
151349 up2date "select all" only selects the first package
151867 After installation firstboot errors with numerous python errors stating GtkDeprecationWarning
Added more to the already bugzilla'd:
146862 yelp - "Could not load section" alerts for obviously existing stuff
153214 kernel - media check failure all disks
New bugs:
153269 RH website - Site unreadable with narrow browser window: text continues off-screen somewhere
153272 yelp - Welsh translation missing in yelp, despite presence of .mo file
153285 anaconda - text install did not offer language selections for post-install
153289 anaconda - text install did not ask me to create non-root users
(moved to firstboot, about to be duped, I expect)
153292 xorg-x11 - DDC probe failed on ATI Radeon 9000
153293 xorg-x11 - "mess" on root window after using scrollbar in a terminal (but only at certain resolutions)
153317 gnome-panel - notification applet crashed when I changed the default theme in Gnome
153320 yelp - yelp complains "could not load section" when invoked via right-click on an applet and choosing "help"
There are a range of other issues, but I am currently waiting for
up2date to sort its dependencies out before filing them. (This is
of course a text-mode up2date in order to avoid #151349 :))
No idea what's going on with the language thing at all. It's making
my head hurt, as /etc/sysconfig/i18n had one locale, and root was
resolutely sitting in POSIX despite this.
Telsa
19 years, 1 month
Stripped Symbols
by Sean Bruno
I looked through the archives and couldn't see any threads that were
relevant so here I go...Should some debugging symbols be left in the
applications while they are in "test?" I just ran into a case wherein I
would have to recompile quite a few things to get any kind of debugging
output.
Was this done due to space constraints or something? Or are is this a
Q/A requirement that we test packages as they will be delivered to the
distribution? Could seperate versions with symbols be available in
rawhide for this purpose?
Sean
19 years, 1 month
Missing library into package <xorg-x11-libs>
by Stephane Gaucher
I want to install mplayer's rpm
rpm -Ui mplayer-1.0-40_pre6a.rhfc3.at.i386.rpm
warning: mplayer-1.0-40_pre6a.rhfc3.at.i386.rpm: V3 DSA signature:
NOKEY, key ID 66534c2b
error: Failed dependencies:
libviaXvMC.so.1 is needed by mplayer-1.0-40_pre6a.rhfc3.at.i386
I have check at www.pbone.net for this library and i fond this library
was into this package: xorg-x11-libs-6.8.1-12.FC3.21_1.rhfc3.at.i386.rpm
so lets install this packages
rpm -Ui xorg-x11-libs-6.8.1-12.FC3.21_1.rhfc3.at.i386.rpm
warning: xorg-x11-libs-6.8.1-12.FC3.21_1.rhfc3.at.i386.rpm: V3 DSA
signature: NOKEY, key ID 66534c2b
error: Failed dependencies:
xorg-x11-libs = 6.8.2-1.FC3.13 is needed by (installed)
xorg-11-fs-6.8.2-1.FC3.13.i386
xorg-x11-libs = 6.8.2-1.FC3.13 is needed by (installed)
xorg-11-6.8.2-1.FC3.13.i386
xorg-x11-libs = 6.8.2-1.FC3.13 is needed by (installed)
xorg-x11-devel-6.8.2-1.FC3.13.i386
no libviaXvMC.so.1 into the /usr/X11R6/lib folder
Can you help me !?!
19 years, 1 month
xorg 6.8.2
by Joshua Andrews
There was an xorg-x11-6.8.2 update released today for FC3. It still does
not include the ATI/GATOS multimedia modules even though GATOS has been
merged into xorg for a long time now.
Will or does the FC4 xorg contain the ATI multimedia modules?
Thanks
19 years, 1 month