Radeon - no DRI -24 depth error
by Jim Cornette
Whenever I try to use mozilla mail, I experience the two lines
repeatedly. I also get this error on other programs, but this is less
prevalent.
The symptoms on-screen seem to be the loss of fonts for the text
messages seem to disappear. After the lost text, the system slows down
unbelievably. sometimes the system locks up and a hard reset is needed.
The first sign was noted after the installation of xorg-x11-6.8.0-4
This happened with the FC2 version of moz and my current version
mozilla-1.7.2-0.3.0
This is without DRI and 24 depth at 1024 x 768 resolution.
(EE) RADEON(0): Idle timed out, resetting engine...
(EE) RADEON(0): FIFO timed out, resetting engine..
Anyway, this seems to be a close cousin to the problem that I had w/ the
i810 driver. The difference being that this setting is the maximum for
the laptop and the i810 seems to work well at 24 depth and 1280 x 1024
resolution.
I am going to drop the depth to 16 for the radeon, but don't think that
this sort of behavior is intended for the radeon or 810 drivers.
Jim
--
Kaufman's First Law of Party Physics:
Population density is inversely proportional
to the square of the distance from the keg.
19 years, 8 months
can't save in ooCalc (openoffice.org)
by yonas abraham
hi,
I am having a problem saving in oocalc, the spreedsheet of openoffice.org. The save butten is grayed (deactivated) and the only I can do is 'save as". even if I did that, the oocalc crashes and bugbudy comes up.
I don't know when it starts. all the other components (writer, impress draw) work fine with no problem.
I try to remove all my personal setting in $HOME and didn't help. I uninstall it and installed it, I even created a new user and test it and all failed.
I am using FC3 test 1 fully up2dated via yum.
[yonasb@FC3t1 ~]$ rpm -qa |grep -i openoffice
openoffice.org-libs-1.1.2-3
openoffice.org-1.1.2-3
any idea?
--yonasb
________________________________________________________________
Get your name as your email address.
Includes spam protection, 1GB storage, no ads and more
Only $1.99/ month - visit http://www.mysite.com/name today!
19 years, 8 months
FC3-re0908.0-i386-disc1-ftp.iso - slow install
by Russell Coker
I booted up with the FC3T2 pre-release disk FC3-re0908.0-i386-disc1-ftp.iso
and the install takes ages. My machine is a HP Vectra machine, P3-800, 256M
of RAM, and USB keyboard.
At the boot: prompt I press ENTER and it gives a boot screen which ends in the
following:
VFS: Mounted root (ext2 filesystem).
Greetings.
anaconda installer init version 10.0.2 starting
mounting /proc filesystem... done
mounting /dev/pts (unix98 pty) filesystem... done
mounting /sys filesystem... done
trying to remount root filesystem read write... done
mounting /tmp as ramfs... done
running install...
running /sbin/loader
It stays for about two minutes with the above before getting to the "CD Found"
screen.
--
http://www.coker.com.au/selinux/ My NSA Security Enhanced Linux packages
http://www.coker.com.au/bonnie++/ Bonnie++ hard drive benchmark
http://www.coker.com.au/postal/ Postal SMTP/POP benchmark
http://www.coker.com.au/~russell/ My home page
19 years, 8 months
Re: udev and the case of the missing /dev directory..
by Mickey Stein
>
>
>hanks for the notes Mickey ... Hopefully this will help Dwaine.
>Over the couse of FC3T1 I've tripped on udev a time or two and the
>"been there, done that" commentary is quite a interesting!
>
>I didn't see a bugzilla entry with your name, which one are you
>referring to?
>
>Regards, Mike Klinke
>
Sorry Mike, I forgot to paste it in, and its not my bug orininally, but
I might be the only person interested in it at the moment ;)
URL:
http://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=116485
---------
This isn't quite the same thing, but its a problem where "udev vc" takes on a life of it's own, eating up cpu and process slots, etc. I've emailed Greg KH from the kernel list about it and it appears to be something happening more and more. Not really related to the problem at heart in not having device entries, but one you *might* have with a little more bad luck after this one is fixed. The good news is that I've a workaround in case you get the problem in the bug.
Mick
19 years, 8 months
Hi
by JERRY WHITMIRE
Can someone help me i have tryed 6 times to download Fedora core 3 test 1 or 2 and gotten bad downloads everytime!!!
It was the dvd version donot want to try again. I am useing a hi speed dsl at 100.5+ mega bit a sec. downloading it takes about 7 hours . I have used fedora core 2 test 1 and had problems useing the internet it would hang up and i would have to do a unclean reboot then things would realy get bad had to uninstall it.
I may not have the same problems with Fedora Core 3 test 2 or 3 REALY LIKE THE LOOKS OF FEDORA !!!! Help Help!!!
I use Whitebox witch is so so and the dirty word Windows Xp.
Hope someone can help
Jerry W. Whitmire
208 NW 8 TH AVE APT 18
Kelso Washington 98626
Jerryw4386(a)msn.com
19 years, 8 months
OpenOffice 1.1.2: calc crashes saving any file under FC2
by Sean Carlos
Hello,
I have attempted to use the developement Open Office 1.1.2 under FC2. I
should note that I installed it using --nodeps to avoid having to
install the evolution data components - perhaps my problem. Writer
works fine; I also used calc for a day without incident. Since the
second day (thus a reboot...), I have not been able to save a file
without Calc crashing. The crash is independent of the source file:
even a new file crashes , saving in OO format. The crash log is attached.
Anyone have a similar experience?
Best regards,
Sean Carlos
--------------------------- log
---------------------------------------------
Distribution: Fedora Core release 2 (Tettnang)
Package: OpenOffice.org
Priority: Normal
Version: GNOME2.6. unspecified
Gnome-Distributor: Red Hat, Inc
Synopsis: Calc crashes when attemping to save a document.
Bugzilla-Product: OpenOffice.org
Bugzilla-Component: Calc / Spreadsheet
Bugzilla-Version: unspecified
Description:
Description of the crash:
Calc crashes when saving a document. Is repeatable. Orignal document
format does not matter. Can repeat with a new document or existing
document.
Steps to reproduce the crash:
1. Save any open document.
2.
3.
Expected Results:
How often does this happen?
Everytime.
Additional Information:
Installed as rpm -Uhv --nodeps over existing openoffice.org 1.1.1 FC2
install. Did NOT install evolution data server components. Calc worked
successfully for at least one day.
Debugging Information:
Backtrace was generated from '/usr/lib/ooo-1.1/program/soffice.bin'
(no debugging symbols found)...Using host libthread_db library
"/lib/tls/libthread_db.so.1".
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...[Thread debugging using
libthread_db enabled]
[New Thread -151152512 (LWP 2578)]
[New Thread -199693392 (LWP 2600)]
[Thread debugging using libthread_db enabled]
[New Thread -151152512 (LWP 2578)]
[New Thread -199693392 (LWP 2600)]
[Thread debugging using libthread_db enabled]
[New Thread -151152512 (LWP 2578)]
[New Thread -199693392 (LWP 2600)]
[New Thread -170452048 (LWP 2596)]
[New Thread -159962192 (LWP 2595)]
(no debugging symbols found)...(no debugging symbols found)...(no
debugging symbols found)...(no debugging symbols found)...(no debugging
symbols found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...(no debugging symbols
found)...(no debugging symbols found)...0x001bb7a2 in _dl_sysinfo_int80
() from /lib/ld-linux.so.2
#0 0x001bb7a2 in _dl_sysinfo_int80 () from /lib/ld-linux.so.2
#1 0x01c30eab in __waitpid_nocancel () from /lib/tls/libc.so.6
#2 0x01bde7b2 in do_system () from /lib/tls/libc.so.6
#3 0x01bde62c in system () from /lib/tls/libc.so.6
#4 0x0089023f in system () from /lib/tls/libpthread.so.0
#5 0x003f5bd4 in osl_releaseVolumeDeviceHandle ()
from /usr/lib/ooo-1.1/program/libsal.so.3
#6 0xfeefe848 in ?? ()
#7 0x00000200 in ?? ()
#8 0x00413c48 in ?? () from /usr/lib/ooo-1.1/program/libsal.so.3
#9 0x00000a12 in ?? ()
#10 0x028434d0 in ?? ()
#11 0x2d677562 in ?? ()
#12 0x64647562 in ?? ()
#13 0x2d2d2079 in ?? ()
#14 0x6e707061 in ?? ()
#15 0x3d656d61 in ?? ()
#16 0x66666f73 in ?? ()
#17 0x2e656369 in ?? ()
#18 0x206e6962 in ?? ()
#19 0x69702d2d in ?? ()
#20 0x35323d64 in ?? ()
#21 0x2d203837 in ?? ()
#22 0x6361702d in ?? ()
#23 0x6567616b in ?? ()
#24 0x65704f3d in ?? ()
#25 0x66664f6e in ?? ()
#26 0x2e656369 in ?? ()
#27 0x0067726f in operator>> ()
from /usr/lib/ooo-1.1/program/widgets/default/libvcl645li.so
19 years, 8 months
Re: no USB jump/flash drive support yet
by Fulko.Hew@sita.aero
Phil Schaffner <Philip.R.Schaffner(a)NASA.gov>@redhat.com on 09/17/2004
03:40:39 PM replied:
> On Fri, 2004-09-17 at 14:47 -0400, Fulko.Hew(a)sita.aero wrote:
> >
> > "Noah Silva [Mailing list]" <nsilva-list(a)aoi.atari-source.com>
@redhat.com
> > on 09/17/2004 02:18:00 PM said:
> >
> >
> > > The DRIVE should show up as /dev/sda, the data partition should
usually
> > be
> > > /dev/sda1. Unfortunately my [sony] memory stick seems not to work
under
> > > FC2 at least, but it doesn't cause hanging problems, it just doesn't
work
> > > at all.
> >
> > It may be due to the fact that FC2 added ACPI support and your machine
> > has a buggy ACPI BIOS (like mine did). All my USB stuff stopped
working
> > when I switched to FC2.
> >
> > Go back throught the archives and look for USB and ACPI for _my_
problem
> > and solution.
>
> Memorex thumb drive worked for me ("giant floppy mode" /dev/sda or /dev/
> sdb - depending...) as well as external an USB hard drive (/dev/sda1
> or /dev/sdb1) on FC1, FC2, and FC3T1 (until an attempted update killed
> the machine - another story), but only booting with noacpi.
I suppose I could have tried 'noacpi',
but I got everything to work (eventually) with ACPI still on.
As I said... go back and look at my messages... it may help you.
19 years, 8 months
Re: Does udev make system unbootable?
by Mark Taylor
Am Freitag, den 17.09.2004, 22:19 -0700 schrieb Chris Ha:
> I think I got udev package onto my fc3 t1 box by
> updating all the packages from yesterday(09/17/04)'s
> development tree. After that, it manages my system
> unbootable as below.
>
> At boot message :
> warning : unable to open an initial console
> (just 2 more lines about SElinux - I don't recall)
>
> after these messages, booting process hangs there.
>
> If someone knows about how to fix, could you please
> help me out?
>
> I have checked /dev directory using Knoppix, and seems
> like many of device files are not there. I'd like to
> know how to fix, specially with Knoppix if possible,
> of course other ways of fixing are welcomed.
>
> Thanks,
> atie
>
I had the exact same problem with 2.6.8-1.541: ran uptodate on 9/18/04, and my
system would no longer boot, with a "unable to open an initial console"
error message.
I was able to recover by booting knoppix, chroot to my FC3 instalation,
and then running Mike Klinke's suggestion:
mkinitrd /boot/initrd-2.6.8-1.541.img 2.6.8-1.541
I had to use knoppix, because if I try to boot from the FC3-test1 disk
in rescue mode, it detects an error after asking about the keyboard and
then shutsdown before I can get a prompt.
Mark
19 years, 8 months