What's Volume Like...
by Alex White
on this particular list? I just signed up and haven't seen but
maybe three or four messages pass by. Maybe this is just a
quiet part of the day (for me anyhow). I'm currently preparing
to download FC3-test1, since I want to help out with problems
and the like.
It could be of course I was expecting volume like on the
"fedora-list" mailing list. I've got 50 waiting already lol
Sincerely,
Alex White
19 years, 10 months
Evolution 1.5.9.1
by Steve Fink
I have been running Evolution 1.5.9.1 for a while now and I've been
unable to test the Groupwise connector, our Groupwise server exists on a
non-standard Groupwise port ( 1679 ) is there any way to change this in
the configuration?
Thanks in advance,
Steve
PS Everything else seems to work great, thanks again.
19 years, 10 months
Re: fedora-test-list Digest, Vol 5, Issue 24
by Steve Gonzales
Answer for this instance:
IPTABLES was not letting NFS through.
HIH anyone who has the same problem.
Steve
> 5. FC3T1 Installation Problem (Steve Gonzales)
> ------------------------------
> Message: 5
> Date: Thu, 15 Jul 2004 16:08:05 -0500
> From: Steve Gonzales <gonzo(a)eng.lsu.edu>
> Subject: FC3T1 Installation Problem
> To: Fedora Test List <fedora-test-list(a)redhat.com>
> Message-ID: <1089925685.32417.11.camel(a)engw0001.eng.lsu.edu>
> Content-Type: text/plain
>
> Hi, folks.
>
> When I attempt an NFS installation of FC3T1, I get the following:
> "install exited abnormally -- received signal 11"
>
> just when anaconda is supposed to start.
>
> I looked it up in bugzilla (there are currently 6 closed and one new
> ticket - none have a solution).
>
> I have tried the nousb hint from bug#122070 to no avail.
>
> Any ideas?
>
> Thanks.
> Steve
19 years, 10 months
Anaconda doesn't install kernel-sourcecode
by G.Wolfe Woodbury
I selected "Kernel Development" during a custom install and made sure
all boxes were checked in details, but kernel-sourcecode is not
installed. Have to specifically install it with yum or up2date.
SHould I bugzilla this for FC3T1?
--
G.Wolfe Woodbury `- -'
U
The Line Eater is a boojum!
19 years, 10 months
RE: HP External DVD burner with Fedora3-Test1 (kernel-2.6.7-1.488)
by Ernest L. Williams Jr.
-----Original Message-----
From: fedora-test-list-bounces(a)redhat.com on behalf of Williams Jr, Ernest L.
Sent: Thu 7/15/2004 7:56 PM
To: fedora-test-list(a)redhat.com
Subject: HP External DVD burner with Fedora3-Test1 (kernel-2.6.7-1.488)
Hi
I would like to burn the FC3T1 DVD but my /dev/cdrom1 no longer shows up.
I am using an External (USB) HP dvd300e
Here is the error I get:
================================================================================
[root@python DVD]# growisofs -Z /dev/cdrom1=FC3-test1-DVD.iso
:-( "/dev/cdrom1=FC3-test1-DVD.iso": unexpected errno:No such file or directory
[root@python DVD]#
=================================================================================
By the way in earlier kernels things used to work, hmmm?
What should I add? Since my external DVD writer no longer even shows up as you can see below:
Only my internal CDROM writer shows up.
==============================================================================================
[root@python DVD]# cdrecord -scanbus
Cdrecord-Clone 2.01a33-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus1:
1,0,0 100) 'SAMSUNG ' 'CDRW/DVD SN-324F' 'U203' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
[root@python DVD]#
============================================================================================================
Ah Ha, looks like it is missing in the "2.6.7-1.488" kernel:
'
'
'
/lib/modules/2.6.7-1.448/kernel/drivers/usb/host/uhci-hcd.ko
/lib/modules/2.6.7-1.459/kernel/drivers/usb/host/uhci-hcd.ko
/lib/modules/2.6.7-1.471/kernel/drivers/usb/host/uhci-hcd.ko
/lib/modules/2.6.7-1.476/kernel/drivers/usb/host/uhci-hcd.ko
/lib/modules/2.6.7-1.478/kernel/drivers/usb/host/uhci-hcd.ko
/lib/modules/2.6.7-1.481/kernel/drivers/usb/host/uhci-hcd.ko
Is there another way to get usb support?
--
fedora-test-list mailing list
fedora-test-list(a)redhat.com
To unsubscribe:
http://www.redhat.com/mailman/listinfo/fedora-test-list
19 years, 10 months
HP External DVD burner with Fedora3-Test1 (kernel-2.6.7-1.488)
by Ernest L. Williams Jr.
Hi
I would like to burn the FC3T1 DVD but my /dev/cdrom1 no longer shows up.
I am using an External (USB) HP dvd300e
Here is the error I get:
================================================================================
[root@python DVD]# growisofs -Z /dev/cdrom1=FC3-test1-DVD.iso
:-( "/dev/cdrom1=FC3-test1-DVD.iso": unexpected errno:No such file or directory
[root@python DVD]#
=================================================================================
By the way in earlier kernels things used to work, hmmm?
What should I add? Since my external DVD writer no longer even shows up as you can see below:
Only my internal CDROM writer shows up.
==============================================================================================
[root@python DVD]# cdrecord -scanbus
Cdrecord-Clone 2.01a33-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 Jörg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to http://bugzilla.redhat.com/bugzilla
Note: The author of cdrecord should not be bothered with problems in this version.
scsidev: 'ATA'
devname: 'ATA'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (schily - Red Hat-scsi-linux-sg.c-1.83-RH '@(#)scsi-linux-sg.c 1.83 04/05/20 Copyright 1997 J. Schilling').
scsibus1:
1,0,0 100) 'SAMSUNG ' 'CDRW/DVD SN-324F' 'U203' Removable CD-ROM
1,1,0 101) *
1,2,0 102) *
1,3,0 103) *
1,4,0 104) *
1,5,0 105) *
1,6,0 106) *
1,7,0 107) *
[root@python DVD]#
============================================================================================================
19 years, 10 months
VMware version 4.5.2 and FC2 to FC3T1 upgrade, after-effects - kernel panic
by Jim Cornette
I just upgraded an installation of FC2 to FC3T1 and the installation
process took about 2 hours to complete. This was not really a problem,
just something noticed.
The problem is that the kernel that I was running on FC2 seemed to be
working alright. After the upgrade and rebooting the machine, a kernel
panic was encountered.
After the panic, I tried the rescue CD for FC2 and it worked and I could
chroot /mnt/sysimage and things seemed to be working in the CLI
properly. I did not try to fire up the GUI in rescue mode.
I then booted up in "linux rescue" mode with the FC3T1 disk and recieved
this error screen.
Here is a screenshot rom the bug report submitted.
https://bugzilla.redhat.com/bugzilla/attachment.cgi?id=101917&action=view
---
I am thinking that this is a kernel that was trimmed a wee bit too much
from the kernel on the FC2 rescue CD to FC3T1. I'm not sure to as how
far back this dieting kernel flopped out at.
Is anyone noticing any panics within a vmware installation. I tried
changing the LABEL= references to /dev/sdx# references and the kernel
still panicked. I tried booting without an intird image and also tried
to create an image. The creation of an initird image gave me some error
where I would get an error pointing to my modules directory and
appending to the end what was meant to be my /boot/intird.img.
Something like /lib/modules/2.6.7-1.478/boot/intird.img
--
You have the capacity to learn from mistakes. You'll learn a lot today.
19 years, 10 months
FC3T1 Installation Problem
by Steve Gonzales
Hi, folks.
When I attempt an NFS installation of FC3T1, I get the following:
"install exited abnormally -- received signal 11"
just when anaconda is supposed to start.
I looked it up in bugzilla (there are currently 6 closed and one new
ticket - none have a solution).
I have tried the nousb hint from bug#122070 to no avail.
Any ideas?
Thanks.
Steve
19 years, 10 months
Evolution is back
by Paul F. Johnson
Hi,
Seems something was annoying Evolution in /usr/local somewhere. I've
given /usr/local a clean out (boy, there was some rubbish in there) and
suddenly, things work again!
TTFN
Paul
--
"Look. If you had one shot, one opportunity, to seize everything you
ever wanted. One moment to capture or would you just let it slip?" -
Marshall Mathers III (Lose Yourself)
19 years, 10 months
Undefined symbol in the current Evolution
by Paul F. Johnson
Hi,
I can't currently use the version of Evolution as it is giving an error which occurs when I click to open one of my mail folders
evolution: symbol lookup error: /usr/lib/evolution/1.5/components/libevolution-mail.so: undefined symbol: e_tree_selection_model_select_paths
Anyone else seeing this?
TTFN
Paul
19 years, 10 months