Hi,
For me no issues to recive the logs.anyway, i have performed the
following steps again,
1.Stop the "dirsrv" on both sides.
2.Enabled "nsslapd-errorlog-level: 8192" on both servers in
"dse.ldif"
file.
3.Started the "dirsrv" on both servers.
4.Export the datas in .ldif and imported to "sam" system
4.From "varad.xxx.xxx.com <
http://varad.xxx.xxx.com>,Remove the
agreement again (./mmr.pl <
http://mmr.pl> --host1
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> --host2
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> --host1_id 1 --host2_id 2 --bindpw <password>
--repmanpw <password> --remove)
5.From "varad.xxx.xxx.com <
http://varad.xxx.xxx.com>,Created agreement
again (./mmr.pl <
http://mmr.pl> --host1
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> --host2
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> --host1_id 1 --host2_id 2 --bindpw <password>
--repmanpw <password> --create)
6.Then created one user under "ou=people" , as a uid=TT in supplier
side (
varad.xxx.xxx.com <
http://varad.xxx.xxx.com>)
7.but not replicated in other system...
Supplier system (/var/log/dirsrv/slapd-varad/errors):
(
varad.xxx.xxx.com <
http://varad.xxx.xxx.com>):
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): Disconnected from the
consumer
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State: start ->
ready_to_acquire_replica
[16/Jun/2011:18:36:48 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State:
ready_to_acquire_replica -> wait_for_changes
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State: wait_for_changes
-> wait_for_changes
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State: wait_for_changes
-> start
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): No linger to cancel on
the connection
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): Disconnected from the
consumer
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State: start ->
ready_to_acquire_replica
[16/Jun/2011:18:41:49 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
varad.xxx.xxx.com
<
http://varad.xxx.xxx.com> port 389 to
sam.xxx.xxx.com
<
http://sam.xxx.xxx.com> port 389"" (sam:389): State:
ready_to_acquire_replica -> wait_for_changes
Consumer system: (sam.xxx.xxx.xom):
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): Disconnected from the consumer
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:46:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: ready_to_acquire_replica -> wait_for_changes
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: wait_for_changes -> wait_for_changes
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: wait_for_changes -> start
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): No linger to cancel on the connection
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): Disconnected from the consumer
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: start -> ready_to_acquire_replica
[16/Jun/2011:18:51:15 +051800] NSMMReplicationPlugin -
agmt="cn="Replication from
sam.xxx.xxx.com <
http://sam.xxx.xxx.com>
port 389 to
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389""
(varad:389): State: ready_to_acquire_replica -> wait_for_changes
So,please let me know what is the problem ? and how to resolve ?
on the supplier
ldapsearch -x -D "cn=directory manager" -W -b cn=config
'(objectclass=nsds5replicationagreement)'
Regards,
Varad
On Wed, Jun 15, 2011 at 7:41 PM, Rich Megginson <rmeggins(a)redhat.com
<mailto:rmeggins@redhat.com>> wrote:
On 06/14/2011 11:59 PM, s.varadha rajan wrote:
> Hi,
>
> Thanks for the reply.that's ok.but if i create one new user in
> supplier side,it's not replicating to consumer side.i think
> ubuntu 10.04 LTS supports fedora-ds 1.1.x and dont have updated
> ppa links. for this case, shall i upgrade the latest version,
> will give the solution? After upgrade, how can i migrate my
> existing data.
First check your errors log on your supplier side to see if there
are any errors during the incremental update phase (the messages
below are from the init phase), then check the access log on the
consumer side to see if the supplier is connecting and attempting
to send the new user.
If that shows nothing, then try enabling the replication log level
-
http://directory.fedoraproject.org/wiki/FAQ#Troubleshooting
>
> or give me a solution for this.
>
> Regards,
> Varad
>
>
> On Tue, Jun 14, 2011 at 8:26 PM, Rich Megginson
> <rmeggins(a)redhat.com <mailto:rmeggins@redhat.com>> wrote:
>
> On 06/14/2011 08:23 AM, s.varadha rajan wrote:
>> Hi,
>>
>> I followed the procedure to configure
>> "multi-master replication" as per
>>
http://directory.fedoraproject.org/wiki/Howto:MultiMasterReplication.
>> but i got an error as
>>
>> _From consumer side:_
>>
>> 14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin -
>> multimaster_be_state_change: replica o=netscaperoot is
>> coming online; enabling replication
>> [14/Jun/2011:19:25:41 +051800] NSMMReplicationPlugin -
>> replica_reload_ruv: Warning: new data for replica
>> o=netscaperoot does not match the data in the changelog.
>> Recreating the changelog file. This could affect
>> replication with replica's consumers in which case the
>> consumers should be reinitialized.
> This is not an error. It just means the consumer has been
> initialized with data from the master, and it had old data
> (probably from setup) which was wiped out.
>
>>
>> _From Supplier side:_
>>
>> [14/Jun/2011:19:26:12 +051800] NSMMReplicationPlugin -
>> Beginning total update of replica "agmt="cn="Replication
>> from
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389
>> to
sam.xxx.xxx.com <
http://sam.xxx.xxx.com> port 389""
>> (sam:389)".
>> [14/Jun/2011:19:26:15 +051800] NSMMReplicationPlugin -
>> Finished total update of replica "agmt="cn="Replication
from
>>
varad.xxx.xxx.com <
http://varad.xxx.xxx.com> port 389 to
>>
sam.xxx.xxx.com <
http://sam.xxx.xxx.com> port 389""
>> (sam:389)". Sent 120 entries.
>>
>>
>> We are using the OS-Ubuntu 10.04. I searched in google and
>> got the some result in
>> "https://bugzilla.redhat.com/show_bug.cgi?id=388021". but i
>> dont know how to fix this.Please help on this.
>>
>> Regards,
>> Varad
>>
>>
>>
>>
>>
>>
>>
>>
>> On Mon, May 30, 2011 at 12:27 PM, s.varadha rajan
>> <rajanvaradhu(a)gmail.com <mailto:rajanvaradhu@gmail.com>>
wrote:
>> >
>> > Hi,
>> >
>> > Thanks for the reply.I will try and update you further.
>> >
>> > Regards,
>> > Varad
>> >
>> >
>> >
>> > On Fri, May 27, 2011 at 8:30 PM, Rich Megginson
>> <rmeggins(a)redhat.com <mailto:rmeggins@redhat.com>> wrote:
>> >>
>> >> On 05/27/2011 12:11 AM, s.varadha rajan wrote:
>> >>
>> >> Hi,
>> >>
>> >> Can i get any update on my below query ?
>> >>
>> >> Regards,
>> >> Varad
>> >>
>> >> On Tue, May 24, 2011 at 6:17 PM, s.varadha rajan
>> <rajanvaradhu(a)gmail.com <mailto:rajanvaradhu@gmail.com>>
wrote:
>> >>>
>> >>> Hi,
>> >>> We are using Ubuntu 10.04 server OS and all the web
>> applications are running on that.We have already implemented
>> fedora-ds for ldap auth.now we are planning to go
>> some up-gradation.kindly let me know the following,
>> >>> 1.How to migrate running fedora-ds server to another
>> server ?
>> >>> 2.i have taken all the user/group+etc in ldif format.is
>> <
http://format.is> it enough for migration or any other db
>> (/var/lib/dirsrv/slapd-<instance>) also need to bacup ?
>> >>
>> >> LDIF should be fine.
>> >>>
>> >>> if any procedure please share with me ? how to
>> import/export .ldif file
>> >>
>> >> /usr/lib[64]/dirsrv/slapd-INSTNAME/db2ldif - export
>> database to ldif
>> >> /usr/lib[64]/dirsrv/slapd-INSTNAME/ldif2db - import
>> database from ldif
>> >>>
>> >>> 3.in <
http://3.in> our setup,one server is in public
>> network.so i am planning to do replication through "ldaps",
>> i.e local server to public server replication through highly
>> secure how to ?
>> >>
>> >> Not exactly, but there is plenty of documentation - see
>>
http://docs.redhat.com/docs/en-US/Red_Hat_Directory_Server/8.2/html-singl...
>> >>>
>> >>> Please help me on the above topics.
>> >>> Regards,
>> >>> Varad
>> >>
>> >> --
>> >> 389 users mailing list
>> >> 389-users(a)lists.fedoraproject.org
>> <mailto:389-users@lists.fedoraproject.org>
>> >>
https://admin.fedoraproject.org/mailman/listinfo/389-users
>> >
>>
>
>