Fedora 28 Update: scap-security-guide-0.1.42-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-1ce27066fa
2019-01-03 02:26:12.618667
--------------------------------------------------------------------------------
Name : scap-security-guide
Product : Fedora 28
Version : 0.1.42
Release : 1.fc28
URL : https://github.com/OpenSCAP/scap-security-guide/
Summary : Security guidance and baselines in SCAP formats
Description :
The scap-security-guide project provides a guide for configuration of the
system from the final system's security point of view. The guidance is specified
in the Security Content Automation Protocol (SCAP) format and constitutes
a catalog of practical hardening advice, linked to government requirements
where applicable. The project bridges the gap between generalized policy
requirements and specific implementation guidelines. The Fedora system
administrator can use the oscap CLI tool from openscap-scanner package, or the
scap-workbench GUI tool from scap-workbench package to verify that the system
conforms to provided guideline. Refer to scap-security-guide(8) manual page for
further information.
--------------------------------------------------------------------------------
Update Information:
Update to latest upstream SCAP-Security-Guide-0.1.42 release:
--------------------------------------------------------------------------------
ChangeLog:
* Wed Dec 12 2018 Watson Yuuma Sato <wsato(a)redhat.com> - 0.1.42-1
- Update to latest upstream SCAP-Security-Guide-0.1.42 release:
https://github.com/ComplianceAsCode/content/releases/tag/v0.1.42
- Fix man page build dependency on derivative content
* Mon Oct 1 2018 Watson Yuuma Sato <wsato(a)redhat.com> - 0.1.41-1
- Update to latest upstream SCAP-Security-Guide-0.1.41 release:
https://github.com/ComplianceAsCode/content/releases/tag/v0.1.41
- Fix Licence of this package
* Wed Jul 25 2018 Mat��j T���� <matyc(a)redhat.com> - 0.1.40-1
- Update to latest upstream SCAP-Security-Guide-0.1.40 release:
https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.40
- Update to use Python3 for build.
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 0.1.39-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Fri May 4 2018 Watson Yuuma Sato <wsato(a)redhat.com> - 0.1.39-2
- Add python version to python2-jinja2 package
* Fri May 4 2018 Watson Yuuma Sato <wsato(a)redhat.com> - 0.1.39-1
- Update to latest upstream SCAP-Security-Guide-0.1.39 release:
https://github.com/OpenSCAP/scap-security-guide/releases/tag/v0.1.39
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-1ce27066fa' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: dav1d-0.1.0-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-88df17ee57
2019-01-03 02:26:12.618653
--------------------------------------------------------------------------------
Name : dav1d
Product : Fedora 28
Version : 0.1.0
Release : 1.fc28
URL : https://code.videolan.org/videolan/dav1d
Summary : AV1 cross-platform Decoder
Description :
dav1d is a new AV1 cross-platform Decoder, open-source, and focused on speed
and correctness.
--------------------------------------------------------------------------------
Update Information:
Initial build
--------------------------------------------------------------------------------
References:
[ 1 ] Bug #1652305 - Review Request: dav1d - AV1 cross-platform Decoder
https://bugzilla.redhat.com/show_bug.cgi?id=1652305
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-88df17ee57' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: pungi-4.1.31-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-fdc6d449e5
2019-01-03 02:26:12.618629
--------------------------------------------------------------------------------
Name : pungi
Product : Fedora 28
Version : 4.1.31
Release : 1.fc28
URL : https://pagure.io/pungi
Summary : Distribution compose tool
Description :
A tool to create anaconda based installation trees/isos of a set of rpms.
--------------------------------------------------------------------------------
Update Information:
The main change for Fedora in this release is that phase ordering is tweaked to
run ostree sooner in the process. This should make composes a little faster.
This was actually tested before, but did not work due to bugs in the entire
stack. Those should now be fixed. The files created in Koji runroot environment
are now changed to be owned by the user running process. This should simplify
cleanup of old composes in Bodhi. Handling configuration files is refactored.
* Pungi can now read a JSON config file. * There is a script that can dump
configuration from a compose or merged multiple files. * Copies of config in the
logs/ directory are no longer renamed. * Dump of config in JSON format now has a
predictable name without a timestamp.
--------------------------------------------------------------------------------
ChangeLog:
* Mon Nov 26 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.31-1
- Remove patches keeping old ostree phase ordering
- Add script to merge and dump multiple configuration files (lsedlar)
- Move resolving git reference to config validation (lsedlar)
- util: Add a cache for resolved git urls (lsedlar)
- Copy config files into logs/global/config-copy/ directory (mboddu)
- Remove timestamp from config dump (lsedlar)
- extra_iso: Support extra files in directory (lsedlar)
- extra_iso: Include extra_files.json metadata (lsedlar)
- Allow reading configuration from JSON (lsedlar)
- Cleanup parsing treefile (lsedlar)
- Fix convert rpm_ostree config to YAML (mboddu)
- koji_wrapper: Change owner of runroot output (lsedlar)
- util: Preserve symlinks when copying (lsedlar)
- Move from yaml.load to yaml.safe_load (patrick)
- extra_iso: Stop including variant extra files (lsedlar)
- gather: Expand wildcards in package names for nodeps (lsedlar)
- Configure image name per variant (lsedlar)
- init: Keep parent groups in addon comps environments (lsedlar)
- Support more specific config for devel modules (lsedlar)
- Load supported milestones from productmd (lsedlar)
- hybrid: Remove dead code (lsedlar)
- Remove dead code (lsedlar)
* Wed Oct 31 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.30-1
- gather: Expand wildcards in Pungi (lsedlar)
- repoclosure: Extract logs from hybrid solver (lsedlar)
- gather: Track multilib that doesn't exist (lsedlar)
- Get the NSVC from Koji module CG build metadata (jkaluza)
- extra_iso: Include media.repo and .discinfo (lsedlar)
- hybrid: Don't add debuginfo as langpacks (lsedlar)
- fus: Write solvables to file (lsedlar)
- hybrid: Honor filter_packages (lsedlar)
- Include all test fixtures in source tarball (lsedlar)
- extra-iso: Use correct efiboot.img file (lsedlar)
- extra-iso: Fix treeinfo (lsedlar)
- createiso: Move code for tweaking treeinfo into a function (lsedlar)
- extra-iso: Generate jigdo by default (lsedlar)
* Mon Oct 15 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.29-3
- Save memory less agressively
* Wed Oct 10 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.29-2
- Add dependency on xorriso to pungi-legacy
- Bump dependency on python-productmd
* Wed Oct 10 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.29-1
- hybrid: Only include modules that are not in lookaside (lsedlar)
- Try to be more conservative about memory usage (lsedlar)
- hybrid: Remove modules not listed by fus (lsedlar)
- gather: Make devel modules configurable (lsedlar)
- pkgset: Stop prefilling RPM artifacts (lsedlar)
- gather: Create devel module for each normal module (lsedlar)
- pkgset: Save package set for each module (lsedlar)
- fus: List lookaside repos first (lsedlar)
- gather: Work with repos without location_base (lsedlar)
- Remove extra dependencies (lsedlar)
- Set repodata mtime to SOURCE_DATE_EPOCH (marmarek)
- Make sure .treeinfo file is sorted (marmarek)
- Use constant MBR ID for isohybrid (marmarek)
- Use xorriso instead of genisoimage (marmarek)
- Use $SOURCE_DATE_EPOCH (if set) in discinfo file (marmarek)
- unified_isos: Add extra variants to metadata (lsedlar)
- extra_iso: Add list of variants to metadata (lsedlar)
- linker: Simplify creating pool (lsedlar)
- gather: Hide pid of fus process (lsedlar)
- fus: Strip protocol from repo path (lsedlar)
- Add 'pkgset_koji_builds' option to include extra builds in a compose
(jkaluza)
- ostree: Reduce duplication in tests (lsedlar)
- ostree: Use --touch-if-changed (lsedlar)
- ostree: Fix handler crash without commit ID (lsedlar)
- gather: Filter arches similarly to pkgset (lsedlar)
- Stop shipping and remove RELEASE-NOTES (pbrobinson)
* Thu Sep 6 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.28-1
- gather: Fix multilib query for hybrid solver (lsedlar)
- gather: Expand multilib lists for hybrid method (lsedlar)
- Index arch modulemd by full NSVC (lsedlar)
- pkgset: Apply whitelist to modules in the tag (lsedlar)
- ostree: Wait for updated ref as well as signature (lsedlar)
- extra_iso: Set unified flag in metadata (lsedlar)
- pkgset: Respect koji event when searching for modules (lsedlar)
- Use dogpile.cache to cache the listTaggedRPMS calls if possible (jkaluza)
- gather: Keep original rpms.json in debug mode (lsedlar)
- Reduce duplication in tests (lsedlar)
- docs: Add better description for package globs (lsedlar)
- Create non-bootable ISO for variant without buildinstall (lsedlar)
- Clean up after yum tests (lsedlar)
- gather: Honor module whitelist (lsedlar)
- Clarify error about non-existing module (lsedlar)
- gather: Print full unresolved dependency (lsedlar)
- Fix tests on Python 2.6 (lsedlar)
- Include all test data in tarball (lsedlar)
* Fri Aug 17 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.27-1
- extra-iso: Rename test data file (lsedlar)
- createiso: Use correct python version (lsedlar)
- ostree: Update tests for working with YAML file (lsedlar)
- pungi/ostree: Convert rpm-ostree YAML to JSON (walters)
- createrepo: Allow passing arbitrary arguments (lsedlar)
- gather: Get modular packages from fus (lsedlar)
- util: Remove escaping spaces from volume ID (lsedlar)
- Allow removing non-alnum chars from volid (lsedlar)
- extra-isos: Include treeinfo pointing to all variants (lsedlar)
- createiso: Use unique paths for breaking hardlinks (lsedlar)
- gather: Detect hybrid variant with additional packages (lsedlar)
- Include exact version of pungi in the logs (mboddu)
- gather: Allow empty result for gather (lsedlar)
- gather: Add langpacks in hybrid solver (lsedlar)
- comps: Add get_langpacks function (lsedlar)
- pungi-legacy: Add --joliet-long option (lsedlar)
- gather: Early exit for non-comps sources (lsedlar)
- tests: Use unittest2 when available (lsedlar)
- buildinstall: Make output world readable (lsedlar)
- buildinstall: Copy file without preserving owner (lsedlar)
- Report failed failable deliverables as errors (lsedlar)
- Stop importing PDCClient (lsedlar)
- spec: build require python-multilib (lsedlar)
* Fri Jul 20 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.26-2
- Backport patch for DNF 3 compatibility
- Fix querying Koji about modules with dash in stream
* Mon Jul 16 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.26-1
- gather: Add a hybrid depsolver backend (lsedlar)
- Always use lookasides for repoclosure (lsedlar)
- doc: closing parentheses for require_all_comps_packages (kdreyer)
- osbs: Generate unique repo names (lsedlar)
- Expand version field during image_build using version_generator (sinny)
- createrepo: Stop including modulemd in debug repos (lsedlar)
- Simplify iterating over module defaults (lsedlar)
- pkgset: Apply module filters on pkgset level (lsedlar)
- init: Validate whitespace in comps groups (lsedlar)
- createrepo: Include empty modules (lsedlar)
- createiso: Break hardlinks by copying files (lsedlar)
- pkgset: Query Koji instead of PDC (mcurlej)
- config: Report variants validity issues (lsedlar)
- variants: Reject values with whitespace (lsedlar)
- osbs: Fresh koji session for getting metadata (lsedlar)
- gather: Ignore comps in lookaside repo (lsedlar)
- init: Test that init phase correctly clones defaults (lsedlar)
- init: Add tests for cloning module defaults (lsedlar)
- init: Add validation for module defaults (lsedlar)
- ostree-installer: Skip comps repo if there are no comps (lsedlar)
- Add test for getting licenses from a repo (lsedlar)
- Add content_licenses to module metadata (sgallagh)
- Update virtualenv instructions (lsedlar)
- Allow extracting koji event from another compose (lsedlar)
- Copy modules instead of reparsing them (sgallagh)
- Silence config warnings in quiet mode (lsedlar)
- osbs: Add nvr to metadata (lsedlar)
- Always get old compose with release type suffix (patrick)
- Make ostree_installer check if buildinstall is skipped correctly (puiterwijk)
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 4.1.25-7
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed Jul 4 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.25-6
- Add dependency on python2-productmd to legacy subpackage
* Mon Jun 18 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 4.1.25-5
- Rebuilt for Python 3.7
* Mon Jun 4 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.25-4
- Call chmod recursively
* Thu May 31 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.25-3
- Don't mark all runroots as successful by chmod
* Wed May 30 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.25-2
- Make results of runroot tasks world readable
* Tue May 22 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.25-1
- comps-wrapper: Make tests pass on EL6 (lsedlar)
- pkgset: Add option to ignore noarch in ExclusiveArch (lsedlar)
- Handling multiple modules with the same NSV - PDC (onosek)
- createrepo: Allow disabling SQLite database (lsedlar)
- init: Drop database from comps repo (lsedlar)
- createrepo: Add module arch to metadata (lsedlar)
- arch: Drop mapping ppc64 -> ppc64p7 (lsedlar)
- arch: Make i386 map to i686 instead of athlon (lsedlar)
- Add a phase for creating extra ISOs (lsedlar)
- Stop using .message attribute on exceptions (lsedlar)
- Validation of parameter skip_phases (onosek)
- Capture sigterm and mark the compose as DOOMED (puiterwijk)
- createiso: Remove useless method (lsedlar)
- createiso: Refactor code into smaller functions (lsedlar)
- arch: Remove mocks in tests (lsedlar)
- ostree-installer: Allow overwriting buildinstall (lsedlar)
- ostree-installer: Work with skipped buildinstall (lsedlar)
- createrepo: Use less verbose logs (lsedlar)
- pkgset: Create global repo in parallel to merging pkgsets (lsedlar)
- createiso: Skip if buildinstall fails (lsedlar)
- Update tests for libmodulemd 1.4.0 (lsedlar)
* Wed May 16 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.24-4
- Use python function to copy ostree installer output
* Thu May 10 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.24-3
- Make wait-for-signed-ostree repeat the fedmsg in case the signer crashed
- Stop filtering comps environments all the time
* Fri May 4 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.24-2
- Copy ostree-installer without preserving owner
* Wed May 2 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.24-1
- koji-wrapper: Log failed subtasks (lsedlar)
- Update compose status when config validation fails (lsedlar)
- pkgset: Allow different inheritance for modules (lsedlar)
- ostree: Recognize force_new_commit option in old config (lsedlar)
- modules: Correctly report error for unexpected modules (lsedlar)
- modules: Allow context in variants XML (lsedlar)
- gather: Print profiling information to stderr (lsedlar)
- pkgset: Stop creating database for repodata (jkaluza)
- gather: Use another variant as lookaside (lsedlar)
- buildinstall: Use metadata if skipped (lsedlar)
- Allow reusing pkgset FileCache from old composes. (jkaluza)
- validation: Populate dict of all variants (lsedlar)
- gather: Stop pulling debuginfo and source for lookaside packages (lsedlar)
- Only use comps repo if we really have comps (lsedlar)
- pkgset: Use modules PDC API (lsedlar)
- Access ci_base date via compose (puiterwijk)
- Allow filtering comps for different variants (lsedlar)
- comps: Make filtering by attribute more generic (lsedlar)
- pkgset: Dump downloaded modulemd to logs (lsedlar)
- Fix PEP8 warning about if not x in y (lsedlar)
- Variant as a lookaside - configuration (onosek)
- Remove comps from arch repo (lsedlar)
- init: Stop creating module defaults dir twice (lsedlar)
- gather: Reduce logs from DNF gathering (lsedlar)
- Clone module defaults into work/ directory (lsedlar)
- Update the configuration JSON schema for module_defaults_dir (contyk)
- Update configuration docs with module_defaults_dir (contyk)
- Handle relative paths in module_defaults_dir (contyk)
- Include module defaults in the repodata (contyk)
- Add *.in fixtures to tarball (lsedlar)
- init: Always filter comps file (lsedlar)
- docs: Describe comps processing (lsedlar)
- gather: Use comps for given variant (lsedlar)
- docs: Fix typo (lsedlar)
- Add all packages to whitelist for hybrid variant (lsedlar)
- comps: Add tests for CompsFilter (lsedlar)
- comps: Move filtering into wrapper module (lsedlar)
- Tests fail if unittest2 library is missing (onosek)
- Add unittest2 and rpmdevools to contributing doc (rmarshall)
- pkgset: Construct UID for PDC modules (lsedlar)
- gather: Simplify creating temporary directory (lsedlar)
- buildinstall: Add extra repos (lsedlar)
- tests: Use dummy modulesdir for DNF (lsedlar)
- Update tests for Python 2.6 (onosek)
* Tue Apr 24 2018 Kevin Fenzi <kevin(a)scrye.com> - 4.1.23-5
- Backport fix for Accessing ci_base date via compose
- https://pagure.io/pungi/pull-request/910
* Thu Apr 12 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.23-4
- Stop creating module defaults dir twice
* Thu Apr 12 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.23-3
- Add support for module defaults
* Wed Apr 11 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.23-2
- Revert reordering of ostree phases
* Wed Apr 4 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.23-1
- Update documentation section 'contributing' (onosek)
- Write module metadata (onosek)
- Support multilib in GatherSourceModule (jkaluza)
- ostree: Always substitute basearch (lsedlar)
- If sigkeys is specified, require at least one (puiterwijk)
- Allow setting <kojitag/> in <modules/> in variants.xml to get the modules
from this Koji tag. (jkaluza)
- Move Modulemd import to pungi/__init__.py to remove duplicated code.
(jkaluza)
- Use Modulemd.Module for 'variant.arch_mmds' instead of yaml dump (jkaluza)
- Fix modular content in non-modular variant (lsedlar)
- Remove the filtered RPMs from module metadata even in case all RPMs are
filtered out. (jkaluza)
- pkgset: Allow empty list of modules (lsedlar)
- buildinstall: Add option to disable it (lsedlar)
- Use libmodulemd instead of modulemd Python module (jkaluza)
- gather: Fix package set whitelist (lsedlar)
- pkgset: Merge initial package set without checks (lsedlar)
- pkgset: Remove check for unique name (lsedlar)
- gather: Honor package whitelist (lsedlar)
- Write package whitelist for each variant (lsedlar)
- image-build: Accept tar.xz extension for docker images (lsedlar)
- pkgset: Correctly detect single tag for variant (lsedlar)
- Remove comps groups from purely modular variants (lsedlar)
- gather: Allow filtering debuginfo packages (lsedlar)
- Move ostree phase and pipelines for running phases (onosek)
- Other repo for OstreeInstaller (onosek)
- Add modulemd metadata to repo even without components (jkaluza)
- Correct fix for volume ID substition sorting by length (awilliam)
- Ordering processing for volume ID substitutions (onosek)
- Disable multilib for modules (jkaluza)
- scm: Stop decoding output of post-clone command (lsedlar)
- Remove useless shebang (lsedlar)
- source_koji.py: Properly handle unset pkgset_koji_tag (otaylor)
- pkgset: Only use package whitelist if enabled (lsedlar)
- Fail early if input packages are unsigned (jkaluza)
- Allow composing from tag with unsigned packages (jkaluza)
- Ostree can use pkgset repos (onosek)
- Support multiple sources in one variant (lsedlar)
- gather: Set lookaside flag focorrectly (lsedlar)
- gather: Try getting srpm from the same repo as rpm (lsedlar)
- Minor correction for python backward compatibility (onosek)
* Fri Mar 23 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-10.1
- Always substitute basearch in ostree
* Fri Mar 16 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-10
- Fix package whitelist for non-modular variants
* Wed Mar 14 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-9
- Allow empty modular variants
- Add option to disable multilib
* Fri Mar 9 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-8
- Fix package set whitelist
* Thu Mar 8 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-7
- image-build: Accept tar.xz extension for docker images
- Allow multiple versions of the same package in package set
* Tue Mar 6 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 4.1.22-6
- Speed up compose with modules
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-fdc6d449e5' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: python-productmd-1.18-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-63e2c74a11
2019-01-03 02:26:12.618615
--------------------------------------------------------------------------------
Name : python-productmd
Product : Fedora 28
Version : 1.18
Release : 1.fc28
URL : https://github.com/release-engineering/productmd
Summary : Library providing parsers for metadata related to OS installation
Description :
Python library providing parsers for metadata related to composes
and installation media.
--------------------------------------------------------------------------------
Update Information:
- Add SecurityFix label - Fix `get_major_version` on inputs with more than two
components
--------------------------------------------------------------------------------
ChangeLog:
* Fri Nov 23 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.18-1
- Add SecurityFix label
- Fix get_major_version on inputs with more than two components
* Fri Oct 5 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.17-1
- Do not use custom repr for objects with no compose
- Add additional_variants attribute to unified images
* Tue Aug 14 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.16-1
- Allow module metadata with empty modules
* Fri Jul 20 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.15-4
- Use python2_sitelib instead of python_sitelib
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1.15-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Fri Jun 22 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.15-2
- Rebuilt for Python 3.7
* Wed Jun 20 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.15-1
- Add missing _modules attribute to Compose
- composeinfo: add docs for Compose class
- rpms: add doc example for using the Rpms class
- common: document parse_nvra() return value elements
- common: explain filename handling for parse_nvra()
* Mon Jun 18 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1.14-2
- Rebuilt for Python 3.7
* Fri May 11 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.14-1
- Add rhevm-ova as valid type
* Thu May 10 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.13-1
- Add vsphere-ova as valid image type
* Mon May 7 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.12-1
- Add vpc/vhd as known image type/format
* Wed Apr 4 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> - 1.11-2
- Stop using Tito from upstream
* Thu Mar 29 2018 Lubom��r Sedl���� <lsedlar(a)redhat.com> 1.11-1
- New class for processing modules (onosek(a)redhat.com)
- packaging: fixes (ignatenko(a)redhat.com)
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-63e2c74a11' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: python-uranium-lulzbot-3.2.32-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-f4bbd60ba0
2019-01-03 02:26:12.618396
--------------------------------------------------------------------------------
Name : python-uranium-lulzbot
Product : Fedora 28
Version : 3.2.32
Release : 1.fc28
URL : https://code.alephobjects.com/diffusion/U/repository/master/
Summary : A Python framework for building desktop applications (Lulzbot fork)
Description :
Uranium is a Python framework for building 3D printing related applications.
--------------------------------------------------------------------------------
Update Information:
Update to Cura-LE 3.2.32. Adds support for new toolheads for the Lulzbot printer
family.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Nov 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.32-1
- update to 3.2.32
* Mon Jul 30 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.23-1
- update to 3.2.23
* Sat Jul 14 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 3.2.21-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 3.2.21-2
- Rebuilt for Python 3.7
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.21-1
- update to 3.2.21
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.20-1
- update to 3.2.20
* Wed May 9 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.19-1
- update to 3.2.19
* Mon Apr 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.18-1
- update to 3.2.18
* Mon Apr 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 3.2.17-1
- update to 3.2.17
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-f4bbd60ba0' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: lulzbot-marlin-firmware-1.1.9.28-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-f4bbd60ba0
2019-01-03 02:26:12.618396
--------------------------------------------------------------------------------
Name : lulzbot-marlin-firmware
Product : Fedora 28
Version : 1.1.9.28
Release : 1.fc28
URL : https://code.alephobjects.com/diffusion/MARLIN/
Summary : Marlin firmware files for the Lulzbot family of 3D printers
Description :
Marlin firmware files for the Lulzbot family of 3D printers.
--------------------------------------------------------------------------------
Update Information:
Update to Cura-LE 3.2.32. Adds support for new toolheads for the Lulzbot printer
family.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Nov 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.9.28-1
- update to 1.1.9.28
* Mon Jul 30 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.8.62-1
- update to 1.1.8.62
* Fri Jul 13 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1:1.1.8.59-3
- Security fix for CVE-2018-1000537
* Fri Jul 13 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:1.1.8.59-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.8.59-1
- update to 1.1.8.59
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.8.51-1
- update to 1.1.8.51
* Tue May 22 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.8.42-1
- update to 1.1.8.42
* Mon Apr 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:1.1.8.29-1
- update to 1.1.8.29
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-f4bbd60ba0' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: CuraEngine-lulzbot-3.2.32-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-f4bbd60ba0
2019-01-03 02:26:12.618396
--------------------------------------------------------------------------------
Name : CuraEngine-lulzbot
Product : Fedora 28
Version : 3.2.32
Release : 1.fc28
URL : https://code.alephobjects.com/diffusion/CTE/
Summary : Engine for processing 3D models into G-code instructions for 3D printers
Description :
CuraEngine-lulzbot is a C++ console application for 3D printing G-code generation. It
has been made as a better and faster alternative to the old Skeinforge engine.
This is just a console application for G-code generation. For a full graphical
application look at cura-lulzbot which is the graphical frontend for CuraEngine-lulzbot.
--------------------------------------------------------------------------------
Update Information:
Update to Cura-LE 3.2.32. Adds support for new toolheads for the Lulzbot printer
family.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Nov 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.32-1
- update to 3.2.32
* Mon Jul 30 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.23-2
- do not copy the resources directory to itself (no-op)
* Mon Jul 30 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.23-1
- update to 3.2.23
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:3.2.21-2
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.21-1
- update to 3.2.21
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.20-1
- update to 3.2.20
* Wed May 9 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.19-1
- update to 3.2.19
* Mon Apr 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.18-1
- update to 3.2.18
* Mon Apr 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.17-1
- update to 3.2.17
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-f4bbd60ba0' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 28 Update: cura-lulzbot-3.2.32-1.fc28
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-f4bbd60ba0
2019-01-03 02:26:12.618396
--------------------------------------------------------------------------------
Name : cura-lulzbot
Product : Fedora 28
Version : 3.2.32
Release : 1.fc28
URL : https://code.alephobjects.com/project/profile/10/
Summary : 3D printer control software
Description :
Cura is a project which aims to be an single software solution for 3D printing.
While it is developed to be used with the Ultimaker 3D printer, it can be used
with other RepRap based designs.
Cura prepares your model for 3D printing. For novices, it makes it easy to get
great results. For experts, there are over 200 settings to adjust to your
needs. As it's open source, our community helps enrich it even more.
This is the Lulzbot fork of Cura2.
--------------------------------------------------------------------------------
Update Information:
Update to Cura-LE 3.2.32. Adds support for new toolheads for the Lulzbot printer
family.
--------------------------------------------------------------------------------
ChangeLog:
* Fri Nov 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.32-1
- update to 3.2.32
* Mon Jul 30 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.23-1
- update to 3.2.23
* Thu Jul 12 2018 Fedora Release Engineering <releng(a)fedoraproject.org> - 1:3.2.21-3
- Rebuilt for https://fedoraproject.org/wiki/Fedora_29_Mass_Rebuild
* Tue Jun 19 2018 Miro Hron��ok <mhroncok(a)redhat.com> - 1:3.2.21-2
- Rebuilt for Python 3.7
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.21-1
- update to 3.2.21
* Wed May 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.20-1
- update to 3.2.20
* Wed May 9 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.19-1
- update to 3.2.19
* Mon Apr 23 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.18-1
- update to 3.2.18
* Mon Apr 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:3.2.17-1
- update to 3.2.17
* Mon Apr 16 2018 Tom Callaway <spot(a)fedoraproject.org> - 1:2.6.69-2
- add PostProcessingPlugin
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-f4bbd60ba0' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 29 Update: gobject-introspection-1.58.3-1.fc29
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-a68a64c45f
2019-01-02 04:10:52.986184
--------------------------------------------------------------------------------
Name : gobject-introspection
Product : Fedora 29
Version : 1.58.3
Release : 1.fc29
URL : https://wiki.gnome.org/Projects/GObjectIntrospection
Summary : Introspection system for GObject-based libraries
Description :
GObject Introspection can scan C header and source files in order to
generate introspection "typelib" files. It also provides an API to examine
typelib files, useful for creating language bindings among other
things.
--------------------------------------------------------------------------------
Update Information:
gobject-introspection 1.58.3 release. * docwriter: Support python-markdown 3.x.
* scanner: Define grefcount and gatomicrefcount as aliases to gint. * scanner:
make using bool without stdbool include work again. * gir: Update glib
annotations for glib 2.58.2
--------------------------------------------------------------------------------
ChangeLog:
* Sun Dec 30 2018 Kalev Lember <klember(a)redhat.com> - 1.58.3-1
- Update to 1.58.3
* Mon Dec 10 2018 Kalev Lember <klember(a)redhat.com> - 1.58.2-1
- Update to 1.58.2
* Sat Nov 17 2018 Kalev Lember <klember(a)redhat.com> - 1.58.1-1
- Update to 1.58.1
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-a68a64c45f' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months
Fedora 29 Update: librsvg2-2.44.11-1.fc29
by updates@fedoraproject.org
--------------------------------------------------------------------------------
Fedora Update Notification
FEDORA-2018-6cb0431cce
2019-01-02 04:10:52.986173
--------------------------------------------------------------------------------
Name : librsvg2
Product : Fedora 29
Version : 2.44.11
Release : 1.fc29
URL : https://wiki.gnome.org/Projects/LibRsvg
Summary : An SVG library based on cairo
Description :
An SVG library based on cairo.
--------------------------------------------------------------------------------
Update Information:
librsvg 2.44.11 release. - Fix crash when a linear RGB filter is followed by
an SRGB filter (Ivan Molodetskikh). - Fix #393 - Stack overflow when freeing
thousands of sibling elements. - Fix #395 - feMorphology was crashing with a
negative scaling transformation. - Fix positioning of adjacent <tspan>
elements.
--------------------------------------------------------------------------------
ChangeLog:
* Sat Dec 29 2018 Kalev Lember <klember(a)redhat.com> - 2.44.11-1
- Update to 2.44.11
* Tue Dec 18 2018 Kalev Lember <klember(a)redhat.com> - 2.44.10-1
- Update to 2.44.10
* Wed Nov 14 2018 Kalev Lember <klember(a)redhat.com> - 2.44.9-1
- Update to 2.44.9
* Fri Oct 26 2018 Kalev Lember <klember(a)redhat.com> - 2.44.8-1
- Update to 2.44.8
* Tue Oct 9 2018 Kalev Lember <klember(a)redhat.com> - 2.44.7-1
- Update to 2.44.7
--------------------------------------------------------------------------------
This update can be installed with the "dnf" update program. Use
su -c 'dnf upgrade --advisory FEDORA-2018-6cb0431cce' at the command
line. For more information, refer to the dnf documentation available at
http://dnf.readthedocs.io/en/latest/command_ref.html#upgrade-command-label
All packages are signed with the Fedora Project GPG key. More details on the
GPG keys used by the Fedora Project can be found at
https://fedoraproject.org/keys
--------------------------------------------------------------------------------
5 years, 4 months