epel-package-announce September 2011

epel-package-announce@lists.fedoraproject.org

1 participants
272 discussions

Fedora EPEL 5 Update: opendkim-2.4.2-3.el5
by updates＠fedoraproject.org 09 Sep '11

09 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4237 2011-08-24 23:13:03 -------------------------------------------------------------------------------- Name : opendkim Product : Fedora EPEL 5 Version : 2.4.2 Release : 3.el5 URL : http://opendkim.org/ Summary : DomainKeys Identified Mail (DKIM) Signature milter and library Description : OpenDKIM provides an open source library that implements the DKIM service, plus a milter-based filter application that can plug in to any milter-aware MTA, including sendmail, Postfix, or any other MTA that supports the milter protocol. The DKIM sender authentication system was originally created by the E-mail Signing Technology Group (ESTG) and is now a proposed standard of the IETF (RFC4871). DKIM is an amalgamation of the DomainKeys (DK) proposal by Yahoo!, Inc. and the Internet Identified Mail (IIM) proposal by Cisco. -------------------------------------------------------------------------------- Update Information: OpenDKIM is a DomainKeys Identified Mail (DKIM) Signature milter and library that implements the DKIM service for Sendmail, Postfix, or any other MTA that supports the milter protocol. -------------------------------------------------------------------------------- References: [ 1 ] Bug #731898 - Review Request: opendkim - DKIM library and milter https://bugzilla.redhat.com/show_bug.cgi?id=731898 -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update opendkim' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: 389-ds-1.2.2-1.el6
by updates＠fedoraproject.org 09 Sep '11

09 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-3606 2011-06-23 21:17:52 -------------------------------------------------------------------------------- Name : 389-ds Product : Fedora EPEL 6 Version : 1.2.2 Release : 1.el6 URL : http://port389.org/ Summary : 389 Directory, Administration, and Console Suite Description : The 389 Directory Server, Administration Server, and Console Suite provide the LDAPv3 server, the httpd daemon used to administer the server, and the console GUI application used for server and user/group administration. -------------------------------------------------------------------------------- Update Information: Get rid of old fedora-ds cruft -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update 389-ds' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: dbmail-3.0.0-0.6.rc3.el6
by updates＠fedoraproject.org 09 Sep '11

09 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4140 2011-08-16 20:21:55 -------------------------------------------------------------------------------- Name : dbmail Product : Fedora EPEL 6 Version : 3.0.0 Release : 0.6.rc3.el6 URL : http://www.dbmail.org Summary : A database backed mail storage system Description : Dbmail is the name of a group of programs that enable the possiblilty of storing and retrieving mail messages from a database. Currently dbmail supports the following database backends via libzdb: MySQL PostgreSQL SQLite Please see /usr/share/doc/dbmail-*/README.fedora for specific information on installation and configuration in Fedora. -------------------------------------------------------------------------------- Update Information: Changes since RC2 were mostly bug-fixes and documentation updates. Also the native (none-sieve) autoreply and autonotify capability was re-instated after being removed during the 2.3 series. Changes since RC1: Oracle support Patches donated by Sergey Pavlov adds Oracle support to both libzdb and DBMail. bugfix for continuation (#874) RC1 contained a bug in the line-continuation code, used mainly by LMTP and IMAP-APPEND. -------------------------------------------------------------------------------- References: [ 1 ] Bug #730383 - DBMail update to rc2 did not update patch for RHEL6 (EPEL) https://bugzilla.redhat.com/show_bug.cgi?id=730383 [ 2 ] Bug #730381 - New upstream version 3.0.0-rc2 https://bugzilla.redhat.com/show_bug.cgi?id=730381 -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update dbmail' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: clamav-unofficial-sigs-3.7.1-6.el6
by updates＠fedoraproject.org 09 Sep '11

09 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4226 2011-08-23 19:00:05 -------------------------------------------------------------------------------- Name : clamav-unofficial-sigs Product : Fedora EPEL 6 Version : 3.7.1 Release : 6.el6 URL : http://www.inetmsg.com/pub/ Summary : Scripts to download unoffical clamav signatures Description : This package contains scripts and configuration files that provide the capability to download, test, and update the 3rd-party signature databases provide by Sanesecurity, SecuriteInfo, MalwarePatrol, OITC, INetMsg and ScamNailer. -------------------------------------------------------------------------------- Update Information: Fix deployment into clamav fixes regressions caused by removal of shell from clam user -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update clamav-unofficial-sigs' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: perl-EV-4.03-6.el6
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4100 2011-08-12 21:25:52 -------------------------------------------------------------------------------- Name : perl-EV Product : Fedora EPEL 6 Version : 4.03 Release : 6.el6 URL : http://search.cpan.org/dist/EV/ Summary : Wrapper for the libev high-performance event loop library Description : This module provides an interface to libev (<http://software.schmorp.de/pkg/libev.html>). While the included documentation is comprehensive, one might also consult the documentation of libev itself (<http://cvs.schmorp.de/libev/ev.html>) for more subtle details on watcher semantics or some discussion on the available backends, or how to force a specific backend with "LIBEV_FLAGS", or just about in any case because it has much more detailed information. -------------------------------------------------------------------------------- Update Information: This update brings in a **new package** for EPEL6: `perl-EV`. Additionnally, this allows building `perl-Coro` with the **`Coro::EV` support enabled**, which wasn't available before. Finally, the `perl-Coro` package gets its own **update** to a later upstream release which shouldn't bring any incompatibility or regression. -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update perl-EV' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: perl-Coro-5.372-3.el6
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4100 2011-08-12 21:25:52 -------------------------------------------------------------------------------- Name : perl-Coro Product : Fedora EPEL 6 Version : 5.372 Release : 3.el6 URL : http://search.cpan.org/dist/Coro/ Summary : The only real threads in perl Description : This module collection manages continuations in general, most often in the form of cooperative threads (also called coros, or simply "coro" in the documentation). They are similar to kernel threads but don't (in general) run in parallel at the same time even on SMP machines. The specific flavor of thread offered by this module also guarantees you that it will not switch between threads unless necessary, at easily-identified points in your program, so locking and parallel access are rarely an issue, making thread programming much safer and easier than using other thread models. -------------------------------------------------------------------------------- Update Information: This update brings in a **new package** for EPEL6: `perl-EV`. Additionnally, this allows building `perl-Coro` with the **`Coro::EV` support enabled**, which wasn't available before. Finally, the `perl-Coro` package gets its own **update** to a later upstream release which shouldn't bring any incompatibility or regression. -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update perl-Coro' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: root-5.28.00f-1.el6
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4193 2011-08-19 19:54:14 -------------------------------------------------------------------------------- Name : root Product : Fedora EPEL 6 Version : 5.28.00f Release : 1.el6 URL : http://root.cern.ch/ Summary : Numerical data analysis framework Description : The ROOT system provides a set of object oriented frameworks with all the functionality needed to handle and analyze large amounts of data in a very efficient way. Having the data defined as a set of objects, specialized storage methods are used to get direct access to the separate attributes of the selected objects, without having to touch the bulk of the data. Included are histogramming methods in 1, 2 and 3 dimensions, curve fitting, function evaluation, minimization, graphics and visualization classes to allow the easy setup of an analysis system that can query and process the data interactively or in batch mode. Thanks to the built in CINT C++ interpreter the command language, the scripting, or macro, language and the programming language are all C++. The interpreter allows for fast prototyping of the macros since it removes the time consuming compile/link cycle. It also provides a good environment to learn C++. If more performance is needed the interactively developed macros can be compiled using a C++ compiler. The system has been designed in such a way that it can query its databases in parallel on MPP machines or on clusters of workstations or high-end PCs. ROOT is an open system that can be dynamically extended by linking external libraries. This makes ROOT a premier platform on which to build data acquisition, simulation and data analysis systems. -------------------------------------------------------------------------------- Update Information: Update of root to version 5.28.00f. For a list of new features and fixed bugs see: http://root.cern.ch/drupal/content/root-version-v5-28-00-patch-release-notes -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update root' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: php-pear-Net-SMTP-1.6.1-1.el6
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4146 2011-08-16 20:22:08 -------------------------------------------------------------------------------- Name : php-pear-Net-SMTP Product : Fedora EPEL 6 Version : 1.6.1 Release : 1.el6 URL : http://pear.php.net/package/Net_SMTP Summary : Provides an implementation of the SMTP protocol Description : Provides an implementation of the SMTP protocol using PEAR's Net_Socket class. php-pear-Net-SMTP can optionally use package "php-pear-Auth-SASL". -------------------------------------------------------------------------------- Update Information: Upstream Changelog: * Fixing the detection of SASL-based AUTH methods. (Bug #18594) -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update php-pear-Net-SMTP' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 6 Update: cmake-fedora-0.7.994-1.el6
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4122 2011-08-16 20:21:09 -------------------------------------------------------------------------------- Name : cmake-fedora Product : Fedora EPEL 6 Version : 0.7.994 Release : 1.el6 URL : https://fedorahosted.org/cmake-fedora/ Summary : CMake helper modules for fedora developers Description : cmake-fedora consist a set of cmake modules that provides helper macros and targets for fedora developers. -------------------------------------------------------------------------------- Update Information: - Fixed Bug 725615 - cmake-fedora: Use UTC for changelog - Fixed Bug 725617 - cmake-fedora: target 'tag' should stop when tag file exists. - Module CompileEnv.cmake is obsoleted by ManageEnvironment.cmake because it is what the variable actually store. - Revised ManageTranslation, now zanata.xml.in can be put to either CMAKE_SOURCE_DIR or CMAKE_CURRENT_SOURCE_DIR. - ManageReleaseOnFedora: + New Constants: FEDORA_NEXT_RELEASE_TAGS, FEDORA_SUPPORTED_RELEASE_TAGS. + Remove NORAWHIDE, as user can use TAGS to achieve the same. + Actually mkdir and clone project if the FedPkg directory is missing. - ManageTranslation: + Fixed zanata.xml path problem + Fixed zanata related targets. - New Variable: CMAKE_FEDORA_TMP_DIR for holding cmake-fedora files. + ChangeLog temporary files have moved to this directory. -------------------------------------------------------------------------------- References: [ 1 ] Bug #725615 - cmake-fedora: Use UTC for changelog https://bugzilla.redhat.com/show_bug.cgi?id=725615 [ 2 ] Bug #725617 - cmake-fedora: target 'tag' should stop when tag file exists. https://bugzilla.redhat.com/show_bug.cgi?id=725617 -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update cmake-fedora' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

Fedora EPEL 5 Update: python-shove-0.2.5-1.el5
by updates＠fedoraproject.org 06 Sep '11

06 Sep '11

-------------------------------------------------------------------------------- Fedora EPEL Update Notification FEDORA-EPEL-2011-4192 2011-08-19 19:54:11 -------------------------------------------------------------------------------- Name : python-shove Product : Fedora EPEL 5 Version : 0.2.5 Release : 1.el5 URL : http://pypi.python.org/pypi/shove/ Summary : Common object storage frontend Description : Common object storage frontend that supports dictionary-style access, object serialization and compression, and multiple storage and caching backends. Currently supported storage backends are: * Amazon S3 Web Service * Berkeley Source Database * Filesystem * Firebird * FTP * DBM * Durus * Memory * Microsoft SQL Server * MySQL * Oracle * PostgreSQL * SQLite * Subversion * Zope Object Database (ZODB) Currently supported caching backends are: * Filesystem * Firebird * memcached * Memory * Microsoft SQL Server * MySQL * Oracle * PostgreSQL * SQLite -------------------------------------------------------------------------------- Update Information: Latest upstream bugfix release -------------------------------------------------------------------------------- References: [ 1 ] Bug #681829 - python-shove-0.2.5 is available https://bugzilla.redhat.com/show_bug.cgi?id=681829 -------------------------------------------------------------------------------- This update can be installed with the "yum" update programs. Use su -c 'yum update python-shove' at the command line. For more information, refer to "Managing Software with yum", available at http://docs.fedoraproject.org/yum/. All packages are signed with the Fedora EPEL GPG key. More details on the GPG keys used by the Fedora Project can be found at https://fedoraproject.org/keys --------------------------------------------------------------------------------

1 0

← Newer
1
...
20
21
22
23
24
25
26
27
28
Older →

Jump to page:

2024

2023

2022

2021

2020

2019

2018

2017

2016

2015

2014

2013

2012

2011

2010

2009

epel-package-announce September 2011