fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
直接硬盘挂其他机器上不行么 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
这个方法好,我咋就没没有想到呢? 我试试先
在 2013年2月22日下午4:05,net_robber net_robber@timectrl.net写道:
直接硬盘挂其他机器上不行么 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
选择不格式化分区不就好了么?直接挂载到某一个分区上。 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
无法启动的系统的fstab文件内容如下: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=2c335009-9968-4c6e-8020-46687d8414d4 / ext4 errors=remount-ro 0 1 # /back_up was on /dev/sda1 during installation UUID=aa7de679-ba1b-4b79-a1c0-7bcaac2692e9 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=3c946913-7f72-4c3c-8ea9-66133f069f62 none swap sw 0 0
原来的磁盘分了3个区, 1. 分区sda1,共42GB,挂载点/ 2. 分区sda5,共452GB,挂载点/home 3. swap分区 我的想法是: 将新的系统安装重新安装在42GB的分区中,并且不格式化sda5分区,这样弄可以么?
在 2013年2月22日下午4:08,杜宏羽 dongfengweixiao@gmail.com写道:
选择不格式化分区不就好了么?直接挂载到某一个分区上。 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
一点问题都没有!完全可以。设置挂载点,但是不格式化就okey 。 在 2013-2-22 下午4:48,"ajax he" ajaxhe@gmail.com写道:
无法启动的系统的fstab文件内容如下: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=2c335009-9968-4c6e-8020-46687d8414d4 / ext4 errors=remount-ro 0 1 # /back_up was on /dev/sda1 during installation UUID=aa7de679-ba1b-4b79-a1c0-7bcaac2692e9 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=3c946913-7f72-4c3c-8ea9-66133f069f62 none swap sw 0 0
原来的磁盘分了3个区,
- 分区sda1,共42GB,挂载点/
- 分区sda5,共452GB,挂载点/home
- swap分区
我的想法是: 将新的系统安装重新安装在42GB的分区中,并且不格式化sda5分区,这样弄可以么?
在 2013年2月22日下午4:08,杜宏羽 dongfengweixiao@gmail.com写道:
选择不格式化分区不就好了么?直接挂载到某一个分区上。 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
具体改如何很配呢? 1. 分区sda1,共42GB,挂载点/ (格式化) 2. 分区sda5,共452GB,挂载点/home (不格式化) 3. swap分区 这样可否?
在 2013年2月22日下午4:49,杜宏羽 dongfengweixiao@gmail.com写道:
一点问题都没有!完全可以。设置挂载点,但是不格式化就okey 。 在 2013-2-22 下午4:48,"ajax he" ajaxhe@gmail.com写道:
无法启动的系统的fstab文件内容如下: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique identifier # for a device; this may be used with UUID= as a more robust way to name # devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=2c335009-9968-4c6e-8020-46687d8414d4 / ext4 errors=remount-ro 0 1 # /back_up was on /dev/sda1 during installation UUID=aa7de679-ba1b-4b79-a1c0-7bcaac2692e9 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=3c946913-7f72-4c3c-8ea9-66133f069f62 none swap sw 0 0
原来的磁盘分了3个区,
- 分区sda1,共42GB,挂载点/
- 分区sda5,共452GB,挂载点/home
- swap分区
我的想法是: 将新的系统安装重新安装在42GB的分区中,并且不格式化sda5分区,这样弄可以么?
在 2013年2月22日下午4:08,杜宏羽 dongfengweixiao@gmail.com写道:
选择不格式化分区不就好了么?直接挂载到某一个分区上。 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文�件列表:
https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
可以,最好把swap 格式化下,有的安装器不格式化它不挂载。我习惯性使用swapfile。 在 2013-2-22 下午4:53,"ajax he" ajaxhe@gmail.com写道:
具体改如何很配呢?
- 分区sda1,共42GB,挂载点/ (格式化)
- 分区sda5,共452GB,挂载点/home (不格式化)
- swap分区
这样可否?
在 2013年2月22日下午4:49,杜宏羽 dongfengweixiao@gmail.com写道:
一点问题都没有!完全可以。设置挂载点,但是不格式化就okey 。 在 2013-2-22 下午4:48,"ajax he" ajaxhe@gmail.com写道:
无法启动的系统的fstab文件内容如下: # /etc/fstab: static file system information. # # Use 'blkid -o value -s UUID' to print the universally unique
identifier
# for a device; this may be used with UUID= as a more robust way to
name
# devices that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda5 during installation UUID=2c335009-9968-4c6e-8020-46687d8414d4 / ext4 errors=remount-ro 0 1 # /back_up was on /dev/sda1 during installation UUID=aa7de679-ba1b-4b79-a1c0-7bcaac2692e9 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=3c946913-7f72-4c3c-8ea9-66133f069f62 none swap sw 0 0
原来的磁盘分了3个区,
- 分区sda1,共42GB,挂载点/
- 分区sda5,共452GB,挂载点/home
- swap分区
我的想法是: 将新的系统安装重新安装在42GB的分区中,并且不格式化sda5分区,这样弄可以么?
在 2013年2月22日下午4:08,杜宏羽 dongfengweixiao@gmail.com写道:
选择不格式化分区不就好了么?直接挂载到某一个分区上。 在 2013-2-22 下午4:01,"ajax he" ajaxhe@gmail.com写道:
fedora14的boot分区出现问题,导致系统不能正常启动,但其他分区的数据还在。 现在我准备重新安装fedora,需要将原来系统(无法启动)中svn和git管理的项目迁移到新的系统中。 对于我这种原系统不能启动(也就是说无法执行svnadmin dump到指定文件)的情况,有没有可行的迁移方案?
谢谢!
Fedora中文郵件列表:
https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:
https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
我觉得这时候你直接用光盘或者是有映像的u盘安装就好了! 在 2013-2-22 下午5:41,"Tristan Huang" tristan.j.huang@gmail.com写道:
我觉得这时候需要puppylinux出马了~
-- Fedora中文郵件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
嗯,手头上有live cd
在 2013年2月22日下午6:02,杜宏羽 dongfengweixiao@gmail.com写道:
我觉得这时候你直接用光盘或者是有映像的u盘安装就好了! 在 2013-2-22 下午5:41,"Tristan Huang" tristan.j.huang@gmail.com写道:
我觉得这时候需要puppylinux出马了~
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
用u盘做个livecd,先上去把东西拷出来比较简单
在 2013年2月22日下午6:02,杜宏羽 dongfengweixiao@gmail.com写道:
我觉得这时候你直接用光盘或者是有映像的u盘安装就好了! 在 2013-2-22 下午5:41,"Tristan Huang" tristan.j.huang@gmail.com写道:
我觉得这时候需要puppylinux出马了~
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
-- Fedora中文�件列表:https://admin.fedoraproject.org/mailman/listinfo/chinese
chinese@lists.fedoraproject.org