上不了无线 可以搜到信号,每次都显示连接中,然后弹出来“无线网络需要认证” 我输的密码是对的,我在win7下一直连的好好的 新安装的fedora15 ,64位的系统 网卡是Atheros的,ath5k的驱动,wep加密 我试了fedora 15的live cd也连不上,用fedora 12可以上 [lzw@localhost ~]$ lspci | grep net 03:00.0 Ethernet controller: Atheros Communications Inc. AR5001 Wireless Network Adapter (rev 01) 0c:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 02) [lzw@localhost ~]$ nm-tool
NetworkManager Tool
State: disconnected
- Device: wlan0 ---------------------------------------------------------------- Type: 802.11 WiFi Driver: ath5k State: disconnected Default: no HW Address: 00:26:5E:E8:69:13
Capabilities:
Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes
Wireless Access Points qq: Ad-Hoc, 02:1C:BF:00:9E:66, Freq 2462 MHz, Rate 54 Mb/s, Strength 70 WEP huang: Ad-Hoc, F6:1D:C5:34:98:E1, Freq 2457 MHz, Rate 54 Mb/s, Strength 64 WEP ChinaNet: Infra, 00:1A:1E:4E:1A:F0, Freq 2462 MHz, Rate 54 Mb/s, Strength 0 ChinaNet: Infra, 00:24:6C:E9:A3:F0, Freq 2462 MHz, Rate 54 Mb/s, Strength 15 ChinaNet: Infra, 00:24:6C:E9:9F:E0, Freq 2412 MHz, Rate 54 Mb/s, Strength 39 ChinaNet: Infra, 00:1A:1E:4E:2A:A0, Freq 2412 MHz, Rate 54 Mb/s, Strength 39 ChinaNet: Infra, 00:1A:1E:4E:86:A0, Freq 2412 MHz, Rate 54 Mb/s, Strength 45 ChinaNet: Infra, 00:1A:1E:4D:C5:80, Freq 2437 MHz, Rate 54 Mb/s, Strength 80 TP-LINK_22E7DC: Infra, E0:05:C5:22:E7:DC, Freq 2437 MHz, Rate 54 Mb/s, Strength 5 WEP dlink: Infra, 00:1C:F0:42:27:9E, Freq 2437 MHz, Rate 54 Mb/s, Strength 17 WEP
- Device: em2 ------------------------------------------------------------------ Type: Wired Driver: r8169 State: unavailable Default: no HW Address: 90:E6:BA:0B:52:09
Capabilities: Carrier Detect: yes Speed: 10 Mb/s
Wired Properties Carrier: off
[lzw@localhost ~]$ [lzw@localhost ~]$ rfkill list bash: rfkill: command not found... [lzw@localhost ~]$ lsmod | grep rfkill rfkill 16552 3 asus_laptop,cfg80211 [lzw@localhost ~]$ lsmod | grep acer [lzw@localhost ~]$ sudo service NetworkManager restart Restarting NetworkManager (via systemctl): [ OK ] [lzw@localhost ~]$ nmcli -p nm =============================================================================================== 网络管理器状态 =============================================================================================== 运行中 状态 WIFI 硬件 WIFI WWAN 硬件 WWAN ----------------------------------------------------------------------------------------------- 运行中 连接中 已启用 已启用 已启用 已禁用 [lzw@localhost ~]$
dmesg的结果: [ 0.698076] ip_tables: (C) 2000-2006 Netfilter Core Team [ 0.698094] TCP cubic registered [ 0.698096] Initializing XFRM netlink socket [ 0.698107] NET: Registered protocol family 17 [ 0.698126] Registering the dns_resolver key type [ 0.698258] PM: Hibernation image not present or could not be loaded. [ 0.698273] registered taskstats version 1 [ 0.698457] IMA: No TPM chip found, activating TPM-bypass! [ 0.698924] Magic number: 7:644:750 [ 0.698944] ata_link link1: hash matches [ 0.698946] link1: hash matches [ 0.698962] tty ttyS1: hash matches [ 0.699074] rtc_cmos 00:03: setting system clock to 2011-08-11 20:44:20 UTC (1313095460) [ 0.699103] Initalizing network drop monitor service [ 0.739476] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 0.948072] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 0.949376] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.949458] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 0.949462] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.991595] ata1.00: ATA-8: WDC WD2500BEVS-08VAT2, 14.01A14, max UDMA/133 [ 0.991598] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 0.993538] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out [ 0.993661] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 0.993665] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out [ 0.995537] ata1.00: configured for UDMA/133 [ 1.027022] usb 2-5: new high speed USB device using ehci_hcd and address 3 [ 1.185363] usb 2-5: New USB device found, idVendor=17ef, idProduct=4808 [ 1.185367] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3 [ 1.185370] usb 2-5: Product: CNF7237&CNF7238 [ 1.185372] usb 2-5: Manufacturer: Chicony Electronics Co., Ltd. [ 1.185375] usb 2-5: SerialNumber: SN0001 [ 1.365351] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared [ 1.365359] ACPI: Battery Slot [BAT0] (battery present) [ 1.365546] scsi 0:0:0:0: Direct-Access ATA WDC WD2500BEVS-0 14.0 PQ: 0 ANSI: 5 [ 1.365705] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB) [ 1.365737] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 1.365769] sd 0:0:0:0: [sda] Write Protect is off [ 1.365773] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 1.365800] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 1.393040] usb 6-1: new low speed USB device using uhci_hcd and address 2 [ 1.446375] sda: sda1 sda2 sda3 < sda5 sda6 > sda4 [ 1.446827] sd 0:0:0:0: [sda] Attached SCSI disk [ 1.546784] usb 6-1: New USB device found, idVendor=1b1a, idProduct=0000 [ 1.546790] usb 6-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 1.546794] usb 6-1: Product: USB Mouse [ 1.562061] input: USB Mouse as /devices/pci0000:00/0000:00:1d.0/usb6/6-1/6-1:1.0/input/input4 [ 1.562187] generic-usb 0003:1B1A:0000.0001: input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.0-1/input0 [ 1.670044] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 1.671899] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1.673333] ata2.00: ATAPI: MATSHITADVD-RAM UJ880A, SB21, max UDMA/33 [ 1.675408] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded [ 1.676792] ata2.00: configured for UDMA/33 [ 1.679553] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ880A SB21 PQ: 0 ANSI: 5 [ 1.681133] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray [ 1.681137] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 1.681261] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 1.681334] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 1.782975] Synaptics Touchpad, model: 1, fw: 7.0, id: 0x1c0b1, caps: 0xd04791/0xb00000/0x20000 [ 1.782983] serio: Synaptics pass-through port at isa0060/serio4/input0 [ 1.826771] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio4/input/input5 [ 1.986130] ata5: SATA link down (SStatus 0 SControl 300) [ 2.291131] ata6: SATA link down (SStatus 0 SControl 300) [ 2.293975] Freeing unused kernel memory: 948k freed [ 2.294321] Write protecting the kernel read-only data: 10240k [ 2.302277] Freeing unused kernel memory: 1528k freed [ 2.311659] Freeing unused kernel memory: 1728k freed [ 2.353417] dracut: dracut-009-10.fc15 [ 2.362810] dracut: rd.luks=0: removing cryptoluks activation [ 2.365664] dracut: rd.lvm=0: removing LVM activation [ 2.372026] udev[118]: starting version 167 [ 2.412818] ACPI Warning: _BQC returned an invalid level (20110112/video-473) [ 2.418916] acpi device:21: registered as cooling_device2 [ 2.419578] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:1e/LNXVIDEO:01/input/input6 [ 2.419690] ACPI: Video Device [VGA1] (multi-head: yes rom: no post: no) [ 2.452145] [drm] Initialized drm 1.1.0 20060810 [ 2.485337] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 2.485345] nouveau 0000:01:00.0: setting latency timer to 64 [ 2.488820] [drm] nouveau 0000:01:00.0: Detected an NV50 generation card (0x298600a2) [ 2.492260] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN [ 2.586256] [drm] nouveau 0000:01:00.0: ... appears to be valid [ 2.586261] [drm] nouveau 0000:01:00.0: BIT BIOS found [ 2.586264] [drm] nouveau 0000:01:00.0: Bios version 62.98.67.00 [ 2.586268] [drm] nouveau 0000:01:00.0: TMDS table version 2.0 [ 2.586272] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0 [ 2.586276] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 01000323 00010034 [ 2.586279] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 02011300 00000028 [ 2.586282] [drm] nouveau 0000:01:00.0: Raw DCB entry 2: 02032312 00020010 [ 2.586284] [drm] nouveau 0000:01:00.0: Raw DCB entry 3: 0000000e 00000000 [ 2.586288] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4 [ 2.586291] [drm] nouveau 0000:01:00.0: 0: 0x00000040: type 0x40 idx 0 tag 0xff [ 2.586295] [drm] nouveau 0000:01:00.0: 1: 0x00000100: type 0x00 idx 1 tag 0xff [ 2.586298] [drm] nouveau 0000:01:00.0: 2: 0x00001261: type 0x61 idx 2 tag 0x07 [ 2.586303] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xDCAB [ 2.611665] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xE0B0 [ 2.618524] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xE882 [ 2.618534] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xE950 [ 2.619627] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEBF9 [ 2.619629] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEC5E [ 2.639637] [drm] nouveau 0000:01:00.0: 0xEC5E: Condition still not met after 20ms, skipping following opcodes [ 2.658687] [drm] nouveau 0000:01:00.0: 4 available performance level(s) [ 2.658693] [drm] nouveau 0000:01:00.0: 0: memory 100MHz core 169MHz shader 338MHz voltage 900mV fanspeed 100% [ 2.658698] [drm] nouveau 0000:01:00.0: 1: memory 301MHz core 275MHz shader 550MHz voltage 900mV fanspeed 100% [ 2.658703] [drm] nouveau 0000:01:00.0: 2: memory 450MHz core 500MHz shader 1000MHz voltage 1090mV fanspeed 100% [ 2.658708] [drm] nouveau 0000:01:00.0: 3: memory 702MHz core 640MHz shader 1600MHz voltage 1200mV fanspeed 100% [ 2.658728] [drm] nouveau 0000:01:00.0: c: memory 300MHz core 275MHz shader 1100MHz voltage 900mV [ 2.658849] [TTM] Zone kernel: Available graphics memory: 1545768 kiB. [ 2.658852] [TTM] Initializing pool allocator. [ 2.658875] [drm] nouveau 0000:01:00.0: Detected 256MiB VRAM [ 2.662637] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture) [ 2.699784] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010). [ 2.699787] [drm] No driver support for vblank timestamp query. [ 2.707397] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own [ 2.886737] [drm] nouveau 0000:01:00.0: allocated 1280x800 fb: 0x40000000, bo ffff8800377a2000 [ 2.886815] fbcon: nouveaufb (fb0) is primary device [ 4.214396] Console: switching to colour frame buffer device 160x50 [ 4.216734] fb0: nouveaufb frame buffer device [ 4.216736] drm: registered panic notifier [ 4.216763] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 4.225830] dracut: Starting plymouth daemon [ 4.535253] dracut: rd.dm=0: removing DM RAID activation [ 4.538372] dracut: rd.md=0: removing MD RAID activation [ 4.697867] firewire_ohci 0000:0d:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 4.719711] sdhci: Secure Digital Host Controller Interface driver [ 4.719715] sdhci: Copyright(c) Pierre Ossman [ 4.760713] firewire_ohci: Added fw-ohci device 0000:0d:00.0, OHCI v1.0, 4 IR + 4 IT contexts, quirks 0x1 [ 4.760932] sdhci-pci 0000:0d:00.1: SDHCI controller found [1180:0822] (rev 22) [ 4.760949] sdhci-pci 0000:0d:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 4.761988] sdhci-pci 0000:0d:00.1: Will use DMA mode even though HW doesn't fully claim to support it. [ 4.764245] Registered led device: mmc0:: [ 4.764307] mmc0: SDHCI controller on PCI [0000:0d:00.1] using DMA [ 5.261166] firewire_core: created device fw0: GUID 001e8c0000a4a960, S400 [ 5.664095] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 5.769693] dracut: Checking filesystems [ 5.769720] dracut: fsck -T -t noopts=_netdev -A -a [ 5.816828] dracut: _Fedora-15-x86_6: Superblock last mount time is in the future. (by less than a day, probably due to the hardware clock being incorrectly set) FIXED. _Fedora-15-x86_6: clean, 82869/2097152 files, 740451/8368384 blocks [ 5.816985] dracut: Remounting /dev/disk/by-uuid/0bc943c7-46c3-4904-844c-fae44577db36 with -o ro, [ 5.832121] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null) [ 5.846361] dracut: Mounted root filesystem /dev/sda4 [ 5.984198] dracut: Switching root [ 6.520820] type=1404 audit(1313095466.320:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 6.747609] SELinux: 2048 avtab hash slots, 220448 rules. [ 6.838435] SELinux: 2048 avtab hash slots, 220448 rules. [ 7.294062] SELinux: 9 users, 13 roles, 3606 types, 191 bools, 1 sens, 1024 cats [ 7.294067] SELinux: 81 classes, 220448 rules [ 7.303349] SELinux: Completing initialization. [ 7.303352] SELinux: Setting up existing superblocks. [ 7.303362] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.303370] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 7.303390] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 7.303397] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 7.303407] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.303452] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs [ 7.304159] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 7.304167] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 7.305991] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 7.306011] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 7.306017] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 7.306036] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 7.306059] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 7.306090] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 7.306117] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 7.306131] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts [ 7.306138] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 7.307067] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.307084] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.307577] SELinux: initialized (dev sda4, type ext4), uses xattr [ 7.310717] type=1403 audit(1313095467.110:3): policy loaded auid=4294967295 ses=4294967295 [ 7.484494] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 7.485221] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.835506] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.839588] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.841160] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.843207] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.843607] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.847189] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.847542] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.850144] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.853206] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts [ 7.915500] systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; fedora) [ 8.147756] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 8.183833] NET: Registered protocol family 10 [ 8.212652] systemd[1]: Set hostname to <localhost.localdomain>. [ 8.384278] input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio4/serio5/input/input7 [ 9.255879] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.259950] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.260841] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.261282] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.262150] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ 9.815157] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 9.827929] EXT4-fs (sda4): re-mounted. Opts: (null) [ 10.727925] udev[455]: starting version 167 [ 11.013418] cfg80211: Calling CRDA to update world regulatory domain [ 11.358892] iTCO_vendor_support: vendor-support=0 [ 11.360717] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06 [ 11.360829] iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS [ 11.446854] microcode: CPU0 sig=0x6fd, pf=0x80, revision=0xa3 [ 11.446866] microcode: CPU1 sig=0x6fd, pf=0x80, revision=0xa3 [ 11.446930] microcode: Microcode Update Driver: v2.00 tigran@aivazian.fsnet.co.uk, Peter Oruba [ 11.464847] Linux video capture interface: v2.00 [ 11.666708] r852 0000:0d:00.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17 [ 11.666798] r852: driver loaded succesfully [ 11.686484] uvcvideo: Found UVC 1.00 device CNF7237&CNF7238 (17ef:4808) [ 11.703853] input: CNF7237&CNF7238 as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input8 [ 11.704344] usbcore: registered new interface driver uvcvideo [ 11.704347] USB Video Class driver (v1.0.0) [ 11.720910] ath5k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 11.720923] ath5k 0000:03:00.0: setting latency timer to 64 [ 11.720982] ath5k 0000:03:00.0: registered as 'phy0' [ 12.219289] ath: EEPROM regdomain: 0x67 [ 12.219292] ath: EEPROM indicates we should expect a direct regpair map [ 12.219296] ath: Country alpha2 being used: 00 [ 12.219298] ath: Regpair used: 0x67 [ 12.288159] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 12.288453] ath5k phy0: Atheros AR2425 chip found (MAC: 0xe2, PHY: 0x70) [ 12.356322] microcode: CPU0 updated to revision 0xa4, date = 2010-10-02 [ 12.356744] microcode: CPU1 updated to revision 0xa4, date = 2010-10-02 [ 12.401436] mtp-probe[597]: checking bus 6, device 2: "/sys/devices/pci0000:00/0000:00:1d.0/usb6/6-1" [ 12.485024] asus_laptop: Asus Laptop Support version 0.42 [ 12.485431] asus_laptop: BSTS called, 0xff7f returned [ 12.485449] asus_laptop: BOXSTER model detected [ 12.485662] asus_laptop: Backlight controlled by ACPI video driver [ 12.485782] input: Asus Laptop extra buttons as /devices/platform/asus_laptop/input/input9 [ 12.583174] mtp-probe[597]: bus: 6, device: 2 was not an MTP device [ 12.755802] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded [ 12.755832] r8169 0000:0c:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19 [ 12.755885] r8169 0000:0c:00.0: setting latency timer to 64 [ 12.755956] r8169 0000:0c:00.0: irq 46 for MSI/MSI-X [ 12.756221] r8169 0000:0c:00.0: eth0: RTL8168c/8111c at 0xffffc9001500e000, 90:e6:ba:0b:52:09, XID 1c4000c0 IRQ 46 [ 12.840253] cfg80211: World regulatory domain updated: [ 12.840257] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 12.840261] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.840265] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.840268] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 12.840271] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 12.840274] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.218237] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 13.218307] HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X [ 13.218341] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 13.353414] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 13.353645] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11 [ 13.353805] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12 [ 13.353963] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13 [ 13.474495] cfg80211: Calling CRDA for country: US [ 13.483667] cfg80211: Regulatory domain changed to country: US [ 13.483671] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 13.483675] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2700 mBm) [ 13.483678] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 1700 mBm) [ 13.483681] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.483684] cfg80211: (5490000 KHz - 5600000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.483688] cfg80211: (5650000 KHz - 5710000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 13.483691] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 3000 mBm) [ 13.639120] udev[467]: renamed network interface eth0 to em2 [ 14.579018] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs [ 17.211249] ip6_tables: (C) 2000-2006 Netfilter Core Team [ 19.315661] auditd (891): /proc/891/oom_adj is deprecated, please use /proc/891/oom_score_adj instead. [ 21.635186] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 21.644882] r8169 0000:0c:00.0: em2: link down [ 21.645481] ADDRCONF(NETDEV_UP): em2: link is not ready [ 21.839500] 802.1Q VLAN Support v1.8 Ben Greear greearb@candelatech.com [ 21.839504] All bugs added by David S. Miller davem@redhat.com [ 32.773882] [drm:drm_debugfs_create_files] *ERROR* Cannot create /sys/kernel/debug/dri/I�|�/4 [ 34.916028] wlan0: no IPv6 routers present [ 39.587495] fuse init (API version 7.16) [ 39.627351] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts [ 39.670476] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts [lzw@localhost ~]$