I tried the following command on fedora-19 with latest updates (iraf did compile and is installed):
makerpm $ rpmbuilld --rebuild x11iraf-2.0-1test.src.rpm
it seems to compile (with a certain amount of warnings about int being converted to pointers and similar things) and things like
----- In file included from xpmP.h:47:0, from scan.c:11: xpm.h:58:22: warning: incompatible implicit declaration of built-in function 'free' [enabled by default] #define XpmFree(ptr) free(ptr) ----- ^ however it doesn't end well for now with
----- make[2]: Entering directory `/home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients' warning: library `libpkg.a' not found Warning, mkpkg line 13: dependency file `<config.h>' not found Warning, mkpkg line 13: dependency file `<mach.h>' not found Warning, mkpkg line 13: dependency file `<xwhen.h>' not found xc -c -w -/g -/m64 idxstr.x ism.x wcsgfterm.x idxstr.x: cannot open iraf.h ism.x: cannot open iraf.h wcsgfterm.x: cannot open iraf.h ar r /home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients/libpkg.a idxstr.o ism.o wcsgfterm.o ar: creating /home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients/libpkg.a ar: idxstr.o: No such file or directory Warning, mkpkg line 10: dependency file `<ctype.h>' not found Warning, mkpkg line 10: dependency file `<time.h>' not found Warning, mkpkg line 12: dependency file `hlib$libc/ctype.h' not found Warning, mkpkg line 12: dependency file `<imhdr.h>' not found Warning, mkpkg line 12: dependency file `<imio.h>' not found Warning, mkpkg line 12: dependency file `<math.h>' not found Warning, mkpkg line 12: dependency file `hlib$libc/time.h' not found Warning, mkpkg line 12: dependency file `<mwset.h>' not found Warning, mkpkg line 12: dependency file `<pkg/skywcs.h>' not found Warning, mkpkg line 15: dependency file `hlib$libc/ctype.h' not found xc -c -w -/g -/m64 t_wcspix.x wcimage.x wcmef.x wcmspec.x wcunknown.x t_wcspix.x: cannot open iraf.h wcimage.x: cannot open iraf.h wcmef.x: cannot open iraf.h wcmspec.x: cannot open iraf.h wcunknown.x: cannot open iraf.h ar r /home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients/libpkg.a t_wcspix.o wcimage.o wcmef.o wcmspec.o wcunknown.o ar: creating /home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients/libpkg.a ar: t_wcspix.o: No such file or directory ranlib libpkg.a ranlib: 'libpkg.a': No such file Updated 8 files in libpkg.a Warning, mkpkg line 13: module `libpkg.a' not found or returned error xc -c -w -/g -/m64 x_ism.x x_ism.x: cannot open iraf.h xc -Nz -/g -/m64 -z x_ism.o libpkg.a -o ism_wcspix.e -lds -lxtools -liminterp -lslalib Warning: file `x_ism.o' not found Warning: file `libpkg.a' not found gcc: error: libmain.o: No such file or directory gcc: error: libex.a: No such file or directory gcc: error: libsys.a: No such file or directory gcc: error: libvops.a: No such file or directory gcc: error: libos.a: No such file or directory gcc: error: libVO.a: No such file or directory make[2]: *** [ism_wcspix.e] Error 1 make[2]: Leaving directory `/home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool/clients' make[1]: *** [ism_clients] Error 1 make[1]: Leaving directory `/home/makerpm/rpmbuild/BUILD/x11-iraf/ximtool' make: *** [all] Error 2 error: Bad exit status from /var/tmp/rpm-tmp.Z1gvtN (%build)
-----
Hi Raphaël,
Sorry, I can't help you with your problem; I just have a question regarding the IRAF install:
Raphaël Jacquot sxpert@sxpert.org writes:
[...] (iraf did compile and is installed):
If it is a 64 bit version: does it work correctly? Specifically, can you do the following in iraf-cl?
imarith dev$pix / 1 image.real pixtype=r
In case you are wondering: I am working to get the Debian package up, and this is the point where it fails. I am trying to check where Fedora and Debian ports differ.
Best regards
Ole
On Sep 3, 2013, at 6:35 PM, debian-devel@liska.ath.cx (Olе Streicher) wrote:
Hi Raphaël,
Sorry, I can't help you with your problem; I just have a question regarding the IRAF install:
Raphaël Jacquot sxpert@sxpert.org writes:
[...] (iraf did compile and is installed):
If it is a 64 bit version: does it work correctly?
$ cat /etc/issue Fedora release 19 (Schrödinger’s Cat) Kernel \r on an \m (\l)
[sxpert@gag9228 ~]$ uname -a Linux gag9228.obs.ujf-grenoble.fr 3.10.10-200.fc19.x86_64 #1 SMP Thu Aug 29 19:05:45 UTC 2013 x86_64 x86_64 x86_64 GNU/Linux
[sxpert@gag9228 ~]$ cl task `cl' has no param file Fatal startup error. CL dies.
I suppose I'm missing something ;-)
Specifically, can you do the following in iraf-cl?
imarith dev$pix / 1 image.real pixtype=r
In case you are wondering: I am working to get the Debian package up, and this is the point where it fails. I am trying to check where Fedora and Debian ports differ.
I am aware (I read the list before posting)
I will be interested as we have some debian fans around here too.
By the way, I am working for IPAG; and IRAM are just next door, so I was planning on at least doing the GILDAS stuff ;-)
Best regards
Ole
Best Regards
Raphael
On 09/03/2013 01:35 PM, Olе Streicher wrote:
Hi Raphaël,
Sorry, I can't help you with your problem; I just have a question regarding the IRAF install:
Raphaël Jacquot sxpert@sxpert.org writes:
[...] (iraf did compile and is installed):
If it is a 64 bit version: does it work correctly? Specifically, can you do the following in iraf-cl?
imarith dev$pix / 1 image.real pixtype=r
Hi Ole,
I wanted to help you testing the Iraf package, so I compiled iraf-2.16-5test.src.rpm in Fedora 19 64-bits with the command 'rpmbuild --rebuild' (it lasted ~7-8 minutes) and then I installed the resulting rpm package... but:
$ cl task `cl' has no param file Fatal startup error. CL dies.
Do you have any ideas why that happens?
All the best, Germán.
In case you are wondering: I am working to get the Debian package up, and this is the point where it fails. I am trying to check where Fedora and Debian ports differ.
Best regards
Ole _______________________________________________ Fedora astronomy mailing list astronomy@lists.fedoraproject.org http://fedoraproject.org/wiki/SIGs/Astronomy https://admin.fedoraproject.org/mailman/listinfo/astronomy
astronomy@lists.fedoraproject.org