[vdsm] Future of Vdsm network configuration - Thread mid-summary

Shu Ming shuming at linux.vnet.ibm.com
Tue Nov 27 01:24:32 UTC 2012


Adam Litke:
> On Mon, Nov 26, 2012 at 02:57:19PM +0200, Livnat Peer wrote:
>> On 26/11/12 03:15, Shu Ming wrote:
>>> Livnat,
>>>
>>> Thanks for your summary.  I got comments below.
>>>
>>> 2012-11-25 18:53, Livnat Peer:
>>>> Hi All,
>>>> We have been discussing $subject for a while and I'd like to summarized
>>>> what we agreed and disagreed on thus far.
>>>>
>>>> The way I see it there are two related discussions:
>>>>
>>>>
>>>> 1. Getting VDSM networking stack to be distribution agnostic.
>>>> - We are all in agreement that VDSM API should be generic enough to
>>>> incorporate multiple implementation. (discussed on this thread: Alon's
>>>> suggestion, Mark's patch for adding support for netcf etc.)
>>>>
>>>> - We would like to maintain at least one implementation as the
>>>> working/up-to-date implementation for our users, this implementation
>>>> should be distribution agnostic (as we all acknowledge this is an
>>>> important goal for VDSM).
>>>> I also think that with the agreement of this community we can choose to
>>>> change our focus, from time to time, from one implementation to another
>>>> as we see fit (today it can be OVS+netcf and in a few months we'll use
>>>> the quantum based implementation if we agree it is better)
>>>>
>>>> 2. The second discussion is about persisting the network configuration
>>>> on the host vs. dynamically retrieving it from a centralized location
>>>> like the engine. Danken raised a concern that even if going with the
>>>> dynamic approach the host should persist the management network
>>>> configuration.
>>> About dynamical retrieving from a centralized location,  when will the
>>> retrieving start? Just in the very early stage of host booting before
>>> network functions?  Or after the host startup and in the normal running
>>> state of the host?  Before retrieving the configuration,  how does the
>>> host network connecting to the engine? I think we need a basic well
>>> known network between hosts and the engine first.  Then after the
>>> retrieving, hosts should reconfigure the network for later management.
>>> However, the timing to retrieve and reconfigure are challenging.
>>>
>> We did not discuss the dynamic approach in details on the list so far
>> and I think this is a good opportunity to start this discussion...
>>
>>  From what was discussed previously I can say that the need for a well
>> known network was raised by danken, it was referred to as the management
>> network, this network would be used for pulling the full host network
>> configuration from the centralized location, at this point the engine.
>>
>> About the timing for retrieving the configuration, there are several
>> approaches. One of them was described by Alon, and I think he'll join
>> this discussion and maybe put it in his own words, but the idea was to
>> 'keep' the network synchronized at all times. When the host have
>> communication channel to the engine and the engine detects there is a
>> mismatch in the host configuration, the engine initiates 'apply network
>> configuration' action on the host.
>>
>> Using this approach we'll have a single path of code to maintain and
>> that would reduce code complexity and bugs - That's quoting Alon Bar Lev
>> (Alon I hope I did not twisted your words/idea).
>>
>> On the other hand the above approach makes local tweaks on the host
>> (done manually by the administrator) much harder.
> I worry a lot about the above if we take the dynamic approach.  It seems we'd
> need to introduce before/after 'apply network configuration' hooks where the
> admin could add custom config commands that aren't yet modeled by engine.
>
>> Any other approaches ?
> Static configuration has the advantage of allowing a host to bring itself back
> online independent of the engine.  This is also useful for anyone who may want
> to deploy a vdsm node in standalone mode.
>
> I think it would be possible to easily support a quasi-static configuration mode
> simply by extending the design of the dynamic approach slightly.  In dynamic
> mode, the network configuration is passed down as a well-defined data structure.
> When a particular configuration has been committed, vdsm could write a copy of
> that configuration data structure to /var/run/vdsm/network-config.json.  During
> a subsequent boot, if the engine cannot be contacted after activating the
> management network, the cached configuration can be applied using the same code
> as for dynamic mode.  We'd have to flesh out the circumstances under which this
> would happen.

Multiple physical network devices are quite popular in x86 servers now. 
Can we add some smart algorithm to leverage multiple physical network 
devices? Say, one specific device for the management network and others 
for vdsm host networks. By isolating the management and host networks, 
the vdsm host can maintain a permanent management work and it is much 
more clean and not bug prone. If the host doesn't get multiple network 
devices, we should fall back to the traditional way.


>
>> I'd like to add a more general question to the discussion what are the
>> advantages of taking the dynamic approach?
>> So far I collected two reasons:
>>
>> -It is a 'cleaner' design, removes complexity on VDSM code, easier to
>> maintain going forward, and less bug prone (I agree with that one, as
>> long as we keep the retrieving configuration mechanism/algorithm simple).
>>
>> -It adheres to the idea of having a stateless hypervisor - some more
>> input on this point would be appreciated
>>
>> Any other advantages?
>>
>> discussing the benefits of having the persisted
> As I mentioned above, the main benefit I see of having some sort of persistent
> configuration is:
>
> - To allow the host to operate independently of the engine in either a failure
>    scenario or in a standalone configuration.
>


-- 
---
舒明 Shu Ming
Open Virtualization Engineerning; CSTL, IBM Corp.
Tel: 86-10-82451626  Tieline: 9051626 E-mail: shuming at cn.ibm.com or shuming at linux.vnet.ibm.com
Address: 3/F Ring Building, ZhongGuanCun Software Park, Haidian District, Beijing 100193, PRC




More information about the vdsm-devel mailing list