[SSSD] [PATCH v1 2/5] NFSv4 client: (private) headers from libnfsidmap

Noam Meltzer noam at primarydata.com
Thu Jan 16 09:02:42 UTC 2014


The private headers are needed in order to:
nfsidmap_internal.h:
* definition of struct trans_func
* prototype for logger function
cfg.h + queue.h:
* prototype(s) for accessing rpc.idmpad configuration file
---
 src/sss_client/nfs/cfg.h               |  68 +++++
 src/sss_client/nfs/nfsidmap_internal.h |  70 +++++
 src/sss_client/nfs/queue.h             | 499 +++++++++++++++++++++++++++++++++
 3 files changed, 637 insertions(+)
 create mode 100644 src/sss_client/nfs/cfg.h
 create mode 100644 src/sss_client/nfs/nfsidmap_internal.h
 create mode 100644 src/sss_client/nfs/queue.h

diff --git a/src/sss_client/nfs/cfg.h b/src/sss_client/nfs/cfg.h
new file mode 100644
index 0000000..d4d4cab
--- /dev/null
+++ b/src/sss_client/nfs/cfg.h
@@ -0,0 +1,68 @@
+/* $OpenBSD: conf.h,v 1.30 2004/06/25 20:25:34 hshoexer Exp $	 */
+/* $EOM: conf.h,v 1.13 2000/09/18 00:01:47 ho Exp $	 */
+
+/*
+ * Copyright (c) 1998, 1999, 2001 Niklas Hallqvist.  All rights reserved.
+ * Copyright (c) 2000, 2003 Håkan Olsson.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
+ * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
+ * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+ * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
+ * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * This code was written under funding by Ericsson Radio Systems.
+ */
+
+#ifndef _CONF_H_
+#define _CONF_H_
+
+#include "queue.h"
+
+struct conf_list_node {
+	TAILQ_ENTRY(conf_list_node) link;
+	char	*field;
+};
+
+struct conf_list {
+	size_t	cnt;
+	TAILQ_HEAD(conf_list_fields_head, conf_list_node) fields;
+};
+
+extern char    *conf_path;
+
+extern int      conf_begin(void);
+extern int      conf_decode_base64(u_int8_t *, u_int32_t *, u_char *);
+extern int      conf_end(int, int);
+extern void     conf_free_list(struct conf_list *);
+extern struct sockaddr *conf_get_address(char *, char *);
+extern struct conf_list *conf_get_list(char *, char *);
+extern struct conf_list *conf_get_tag_list(char *);
+extern int      conf_get_num(char *, char *, int);
+extern char    *conf_get_str(char *, char *);
+extern char    *conf_get_str_with_def(char *, char *, char*);
+extern void     conf_init(void);
+extern int      conf_match_num(char *, char *, int);
+extern void     conf_reinit(void);
+extern int      conf_remove(int, char *, char *);
+extern int      conf_remove_section(int, char *);
+extern int      conf_set(int, char *, char *, char *, int, int);
+extern void     conf_report(void);
+
+#endif				/* _CONF_H_ */
diff --git a/src/sss_client/nfs/nfsidmap_internal.h b/src/sss_client/nfs/nfsidmap_internal.h
new file mode 100644
index 0000000..e10fa66
--- /dev/null
+++ b/src/sss_client/nfs/nfsidmap_internal.h
@@ -0,0 +1,70 @@
+/*
+ *  nfsidmap_internal.h
+ *
+ *  nfs idmapping library, primarily for nfs4 client/server kernel idmapping
+ *  and for userland nfs4 idmapping by acl libraries.
+ *
+ *  Copyright (c) 2004 The Regents of the University of Michigan.
+ *  All rights reserved.
+ *
+ *  Andy Adamson <andros at umich.edu>
+ *
+ *  Redistribution and use in source and binary forms, with or without
+ *  modification, are permitted provided that the following conditions
+ *  are met:
+ *
+ *  1. Redistributions of source code must retain the above copyright
+ *     notice, this list of conditions and the following disclaimer.
+ *  2. Redistributions in binary form must reproduce the above copyright
+ *     notice, this list of conditions and the following disclaimer in the
+ *     documentation and/or other materials provided with the distribution.
+ *  3. Neither the name of the University nor the names of its
+ *     contributors may be used to endorse or promote products derived
+ *     from this software without specific prior written permission.
+ *
+ *  THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ *  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ *  DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ *  FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ *  CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ *  SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR
+ *  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
+ *  LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
+ *  NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ *  SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+char *get_default_domain(void);
+struct conf_list *get_local_realms(void);
+
+typedef struct trans_func * (*libnfsidmap_plugin_init_t)(void);
+
+struct trans_func {
+	char *name;
+	int (*init)(void);
+	int (*princ_to_ids)(char *secname, char *princ, uid_t *uid, gid_t *gid, 
+		extra_mapping_params **ex);
+	int (*name_to_uid)(char *name, uid_t *uid);
+	int (*name_to_gid)(char *name, gid_t *gid);
+	int (*uid_to_name)(uid_t uid, char *domain, char *name, size_t len);
+	int (*gid_to_name)(gid_t gid, char *domain, char *name, size_t len);
+	int (*gss_princ_to_grouplist)(char *secname, char *princ, gid_t *groups,
+		int *ngroups, extra_mapping_params **ex);
+};
+
+struct mapping_plugin {
+	void *dl_handle;
+	struct trans_func *trans;
+};
+
+typedef enum {
+	IDTYPE_USER = 1,
+	IDTYPE_GROUP = 2
+} idtypes;
+
+extern int idmap_verbosity;
+extern nfs4_idmap_log_function_t idmap_log_func;
+/* Level zero always prints, others print depending on verbosity level */
+#define IDMAP_LOG(LVL, MSG) \
+	do { if (LVL <= idmap_verbosity) (*idmap_log_func)MSG; } while (0)
diff --git a/src/sss_client/nfs/queue.h b/src/sss_client/nfs/queue.h
new file mode 100644
index 0000000..2823fe7
--- /dev/null
+++ b/src/sss_client/nfs/queue.h
@@ -0,0 +1,499 @@
+/*	$OpenBSD: queue.h,v 1.22 2001/06/23 04:39:35 angelos Exp $	*/
+/*	$NetBSD: queue.h,v 1.11 1996/05/16 05:17:14 mycroft Exp $	*/
+
+/*
+ * Copyright (c) 1991, 1993
+ *	The Regents of the University of California.  All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ * 3. Neither the name of the University nor the names of its contributors
+ *    may be used to endorse or promote products derived from this software
+ *    without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
+ * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
+ * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
+ * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
+ * SUCH DAMAGE.
+ *
+ *	@(#)queue.h	8.5 (Berkeley) 8/20/94
+ */
+
+#ifndef	_SYS_QUEUE_H_
+#define	_SYS_QUEUE_H_
+
+/*
+ * This file defines five types of data structures: singly-linked lists,
+ * lists, simple queues, tail queues, and circular queues.
+ *
+ *
+ * A singly-linked list is headed by a single forward pointer. The elements
+ * are singly linked for minimum space and pointer manipulation overhead at
+ * the expense of O(n) removal for arbitrary elements. New elements can be
+ * added to the list after an existing element or at the head of the list.
+ * Elements being removed from the head of the list should use the explicit
+ * macro for this purpose for optimum efficiency. A singly-linked list may
+ * only be traversed in the forward direction.  Singly-linked lists are ideal
+ * for applications with large datasets and few or no removals or for
+ * implementing a LIFO queue.
+ *
+ * A list is headed by a single forward pointer (or an array of forward
+ * pointers for a hash table header). The elements are doubly linked
+ * so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before
+ * or after an existing element or at the head of the list. A list
+ * may only be traversed in the forward direction.
+ *
+ * A simple queue is headed by a pair of pointers, one the head of the
+ * list and the other to the tail of the list. The elements are singly
+ * linked to save space, so elements can only be removed from the
+ * head of the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the
+ * list. A simple queue may only be traversed in the forward direction.
+ *
+ * A tail queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or
+ * after an existing element, at the head of the list, or at the end of
+ * the list. A tail queue may be traversed in either direction.
+ *
+ * A circle queue is headed by a pair of pointers, one to the head of the
+ * list and the other to the tail of the list. The elements are doubly
+ * linked so that an arbitrary element can be removed without a need to
+ * traverse the list. New elements can be added to the list before or after
+ * an existing element, at the head of the list, or at the end of the list.
+ * A circle queue may be traversed in either direction, but has a more
+ * complex end of list detection.
+ *
+ * For details on the use of these macros, see the queue(3) manual page.
+ */
+
+/*
+ * Singly-linked List definitions.
+ */
+#define SLIST_HEAD(name, type)						\
+struct name {								\
+	struct type *slh_first;	/* first element */			\
+}
+
+#define	SLIST_HEAD_INITIALIZER(head)					\
+	{ NULL }
+
+#define SLIST_ENTRY(type)						\
+struct {								\
+	struct type *sle_next;	/* next element */			\
+}
+
+/*
+ * Singly-linked List access methods.
+ */
+#define	SLIST_FIRST(head)	((head)->slh_first)
+#define	SLIST_END(head)		NULL
+#define	SLIST_EMPTY(head)	(SLIST_FIRST(head) == SLIST_END(head))
+#define	SLIST_NEXT(elm, field)	((elm)->field.sle_next)
+
+#define	SLIST_FOREACH(var, head, field)					\
+	for((var) = SLIST_FIRST(head);					\
+	    (var) != SLIST_END(head);					\
+	    (var) = SLIST_NEXT(var, field))
+
+/*
+ * Singly-linked List functions.
+ */
+#define	SLIST_INIT(head) {						\
+	SLIST_FIRST(head) = SLIST_END(head);				\
+}
+
+#define	SLIST_INSERT_AFTER(slistelm, elm, field) do {			\
+	(elm)->field.sle_next = (slistelm)->field.sle_next;		\
+	(slistelm)->field.sle_next = (elm);				\
+} while (0)
+
+#define	SLIST_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.sle_next = (head)->slh_first;			\
+	(head)->slh_first = (elm);					\
+} while (0)
+
+#define	SLIST_REMOVE_HEAD(head, field) do {				\
+	(head)->slh_first = (head)->slh_first->field.sle_next;		\
+} while (0)
+
+#define SLIST_REMOVE(head, elm, type, field) do {			\
+	if ((head)->slh_first == (elm)) {				\
+		SLIST_REMOVE_HEAD((head), field);			\
+	}								\
+	else {								\
+		struct type *curelm = (head)->slh_first;		\
+		while( curelm->field.sle_next != (elm) )		\
+			curelm = curelm->field.sle_next;		\
+		curelm->field.sle_next =				\
+		    curelm->field.sle_next->field.sle_next;		\
+	}								\
+} while (0)
+
+/*
+ * List definitions.
+ */
+#define LIST_HEAD(name, type)						\
+struct name {								\
+	struct type *lh_first;	/* first element */			\
+}
+
+#define LIST_HEAD_INITIALIZER(head)					\
+	{ NULL }
+
+#define LIST_ENTRY(type)						\
+struct {								\
+	struct type *le_next;	/* next element */			\
+	struct type **le_prev;	/* address of previous next element */	\
+}
+
+/*
+ * List access methods
+ */
+#define	LIST_FIRST(head)		((head)->lh_first)
+#define	LIST_END(head)			NULL
+#define	LIST_EMPTY(head)		(LIST_FIRST(head) == LIST_END(head))
+#define	LIST_NEXT(elm, field)		((elm)->field.le_next)
+
+#define LIST_FOREACH(var, head, field)					\
+	for((var) = LIST_FIRST(head);					\
+	    (var)!= LIST_END(head);					\
+	    (var) = LIST_NEXT(var, field))
+
+/*
+ * List functions.
+ */
+#define	LIST_INIT(head) do {						\
+	LIST_FIRST(head) = LIST_END(head);				\
+} while (0)
+
+#define LIST_INSERT_AFTER(listelm, elm, field) do {			\
+	if (((elm)->field.le_next = (listelm)->field.le_next) != NULL)	\
+		(listelm)->field.le_next->field.le_prev =		\
+		    &(elm)->field.le_next;				\
+	(listelm)->field.le_next = (elm);				\
+	(elm)->field.le_prev = &(listelm)->field.le_next;		\
+} while (0)
+
+#define	LIST_INSERT_BEFORE(listelm, elm, field) do {			\
+	(elm)->field.le_prev = (listelm)->field.le_prev;		\
+	(elm)->field.le_next = (listelm);				\
+	*(listelm)->field.le_prev = (elm);				\
+	(listelm)->field.le_prev = &(elm)->field.le_next;		\
+} while (0)
+
+#define LIST_INSERT_HEAD(head, elm, field) do {				\
+	if (((elm)->field.le_next = (head)->lh_first) != NULL)		\
+		(head)->lh_first->field.le_prev = &(elm)->field.le_next;\
+	(head)->lh_first = (elm);					\
+	(elm)->field.le_prev = &(head)->lh_first;			\
+} while (0)
+
+#define LIST_REMOVE(elm, field) do {					\
+	if ((elm)->field.le_next != NULL)				\
+		(elm)->field.le_next->field.le_prev =			\
+		    (elm)->field.le_prev;				\
+	*(elm)->field.le_prev = (elm)->field.le_next;			\
+} while (0)
+
+#define LIST_REPLACE(elm, elm2, field) do {				\
+	if (((elm2)->field.le_next = (elm)->field.le_next) != NULL)	\
+		(elm2)->field.le_next->field.le_prev =			\
+		    &(elm2)->field.le_next;				\
+	(elm2)->field.le_prev = (elm)->field.le_prev;			\
+	*(elm2)->field.le_prev = (elm2);				\
+} while (0)
+
+/*
+ * Simple queue definitions.
+ */
+#define SIMPLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *sqh_first;	/* first element */			\
+	struct type **sqh_last;	/* addr of last next element */		\
+}
+
+#define SIMPLEQ_HEAD_INITIALIZER(head)					\
+	{ NULL, &(head).sqh_first }
+
+#define SIMPLEQ_ENTRY(type)						\
+struct {								\
+	struct type *sqe_next;	/* next element */			\
+}
+
+/*
+ * Simple queue access methods.
+ */
+#define	SIMPLEQ_FIRST(head)	    ((head)->sqh_first)
+#define	SIMPLEQ_END(head)	    NULL
+#define	SIMPLEQ_EMPTY(head)	    (SIMPLEQ_FIRST(head) == SIMPLEQ_END(head))
+#define	SIMPLEQ_NEXT(elm, field)    ((elm)->field.sqe_next)
+
+#define SIMPLEQ_FOREACH(var, head, field)				\
+	for((var) = SIMPLEQ_FIRST(head);				\
+	    (var) != SIMPLEQ_END(head);					\
+	    (var) = SIMPLEQ_NEXT(var, field))
+
+/*
+ * Simple queue functions.
+ */
+#define	SIMPLEQ_INIT(head) do {						\
+	(head)->sqh_first = NULL;					\
+	(head)->sqh_last = &(head)->sqh_first;				\
+} while (0)
+
+#define SIMPLEQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.sqe_next = (head)->sqh_first) == NULL)	\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(head)->sqh_first = (elm);					\
+} while (0)
+
+#define SIMPLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.sqe_next = NULL;					\
+	*(head)->sqh_last = (elm);					\
+	(head)->sqh_last = &(elm)->field.sqe_next;			\
+} while (0)
+
+#define SIMPLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	if (((elm)->field.sqe_next = (listelm)->field.sqe_next) == NULL)\
+		(head)->sqh_last = &(elm)->field.sqe_next;		\
+	(listelm)->field.sqe_next = (elm);				\
+} while (0)
+
+#define SIMPLEQ_REMOVE_HEAD(head, elm, field) do {			\
+	if (((head)->sqh_first = (elm)->field.sqe_next) == NULL)	\
+		(head)->sqh_last = &(head)->sqh_first;			\
+} while (0)
+
+/*
+ * Tail queue definitions.
+ */
+#define TAILQ_HEAD(name, type)						\
+struct name {								\
+	struct type *tqh_first;	/* first element */			\
+	struct type **tqh_last;	/* addr of last next element */		\
+}
+
+#define TAILQ_HEAD_INITIALIZER(head)					\
+	{ NULL, &(head).tqh_first }
+
+#define TAILQ_ENTRY(type)						\
+struct {								\
+	struct type *tqe_next;	/* next element */			\
+	struct type **tqe_prev;	/* address of previous next element */	\
+}
+
+/*
+ * tail queue access methods
+ */
+#define	TAILQ_FIRST(head)		((head)->tqh_first)
+#define	TAILQ_END(head)			NULL
+#define	TAILQ_NEXT(elm, field)		((elm)->field.tqe_next)
+#define TAILQ_LAST(head, headname)					\
+	(*(((struct headname *)((head)->tqh_last))->tqh_last))
+/* XXX */
+#define TAILQ_PREV(elm, headname, field)				\
+	(*(((struct headname *)((elm)->field.tqe_prev))->tqh_last))
+#define	TAILQ_EMPTY(head)						\
+	(TAILQ_FIRST(head) == TAILQ_END(head))
+
+#define TAILQ_FOREACH(var, head, field)					\
+	for((var) = TAILQ_FIRST(head);					\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_NEXT(var, field))
+
+#define TAILQ_FOREACH_REVERSE(var, head, field, headname)		\
+	for((var) = TAILQ_LAST(head, headname);				\
+	    (var) != TAILQ_END(head);					\
+	    (var) = TAILQ_PREV(var, headname, field))
+
+/*
+ * Tail queue functions.
+ */
+#define	TAILQ_INIT(head) do {						\
+	(head)->tqh_first = NULL;					\
+	(head)->tqh_last = &(head)->tqh_first;				\
+} while (0)
+
+#define TAILQ_INSERT_HEAD(head, elm, field) do {			\
+	if (((elm)->field.tqe_next = (head)->tqh_first) != NULL)	\
+		(head)->tqh_first->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(head)->tqh_first = (elm);					\
+	(elm)->field.tqe_prev = &(head)->tqh_first;			\
+} while (0)
+
+#define TAILQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.tqe_next = NULL;					\
+	(elm)->field.tqe_prev = (head)->tqh_last;			\
+	*(head)->tqh_last = (elm);					\
+	(head)->tqh_last = &(elm)->field.tqe_next;			\
+} while (0)
+
+#define TAILQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	if (((elm)->field.tqe_next = (listelm)->field.tqe_next) != NULL)\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    &(elm)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm)->field.tqe_next;		\
+	(listelm)->field.tqe_next = (elm);				\
+	(elm)->field.tqe_prev = &(listelm)->field.tqe_next;		\
+} while (0)
+
+#define	TAILQ_INSERT_BEFORE(listelm, elm, field) do {			\
+	(elm)->field.tqe_prev = (listelm)->field.tqe_prev;		\
+	(elm)->field.tqe_next = (listelm);				\
+	*(listelm)->field.tqe_prev = (elm);				\
+	(listelm)->field.tqe_prev = &(elm)->field.tqe_next;		\
+} while (0)
+
+#define TAILQ_REMOVE(head, elm, field) do {				\
+	if (((elm)->field.tqe_next) != NULL)				\
+		(elm)->field.tqe_next->field.tqe_prev =			\
+		    (elm)->field.tqe_prev;				\
+	else								\
+		(head)->tqh_last = (elm)->field.tqe_prev;		\
+	*(elm)->field.tqe_prev = (elm)->field.tqe_next;			\
+} while (0)
+
+#define TAILQ_REPLACE(head, elm, elm2, field) do {			\
+	if (((elm2)->field.tqe_next = (elm)->field.tqe_next) != NULL)	\
+		(elm2)->field.tqe_next->field.tqe_prev =		\
+		    &(elm2)->field.tqe_next;				\
+	else								\
+		(head)->tqh_last = &(elm2)->field.tqe_next;		\
+	(elm2)->field.tqe_prev = (elm)->field.tqe_prev;			\
+	*(elm2)->field.tqe_prev = (elm2);				\
+} while (0)
+
+/*
+ * Circular queue definitions.
+ */
+#define CIRCLEQ_HEAD(name, type)					\
+struct name {								\
+	struct type *cqh_first;		/* first element */		\
+	struct type *cqh_last;		/* last element */		\
+}
+
+#define CIRCLEQ_HEAD_INITIALIZER(head)					\
+	{ CIRCLEQ_END(&head), CIRCLEQ_END(&head) }
+
+#define CIRCLEQ_ENTRY(type)						\
+struct {								\
+	struct type *cqe_next;		/* next element */		\
+	struct type *cqe_prev;		/* previous element */		\
+}
+
+/*
+ * Circular queue access methods
+ */
+#define	CIRCLEQ_FIRST(head)		((head)->cqh_first)
+#define	CIRCLEQ_LAST(head)		((head)->cqh_last)
+#define	CIRCLEQ_END(head)		((void *)(head))
+#define	CIRCLEQ_NEXT(elm, field)	((elm)->field.cqe_next)
+#define	CIRCLEQ_PREV(elm, field)	((elm)->field.cqe_prev)
+#define	CIRCLEQ_EMPTY(head)						\
+	(CIRCLEQ_FIRST(head) == CIRCLEQ_END(head))
+
+#define CIRCLEQ_FOREACH(var, head, field)				\
+	for((var) = CIRCLEQ_FIRST(head);				\
+	    (var) != CIRCLEQ_END(head);					\
+	    (var) = CIRCLEQ_NEXT(var, field))
+
+#define CIRCLEQ_FOREACH_REVERSE(var, head, field)			\
+	for((var) = CIRCLEQ_LAST(head);					\
+	    (var) != CIRCLEQ_END(head);					\
+	    (var) = CIRCLEQ_PREV(var, field))
+
+/*
+ * Circular queue functions.
+ */
+#define	CIRCLEQ_INIT(head) do {						\
+	(head)->cqh_first = CIRCLEQ_END(head);				\
+	(head)->cqh_last = CIRCLEQ_END(head);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_AFTER(head, listelm, elm, field) do {		\
+	(elm)->field.cqe_next = (listelm)->field.cqe_next;		\
+	(elm)->field.cqe_prev = (listelm);				\
+	if ((listelm)->field.cqe_next == CIRCLEQ_END(head))		\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(listelm)->field.cqe_next->field.cqe_prev = (elm);	\
+	(listelm)->field.cqe_next = (elm);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_BEFORE(head, listelm, elm, field) do {		\
+	(elm)->field.cqe_next = (listelm);				\
+	(elm)->field.cqe_prev = (listelm)->field.cqe_prev;		\
+	if ((listelm)->field.cqe_prev == CIRCLEQ_END(head))		\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(listelm)->field.cqe_prev->field.cqe_next = (elm);	\
+	(listelm)->field.cqe_prev = (elm);				\
+} while (0)
+
+#define CIRCLEQ_INSERT_HEAD(head, elm, field) do {			\
+	(elm)->field.cqe_next = (head)->cqh_first;			\
+	(elm)->field.cqe_prev = CIRCLEQ_END(head);			\
+	if ((head)->cqh_last == CIRCLEQ_END(head))			\
+		(head)->cqh_last = (elm);				\
+	else								\
+		(head)->cqh_first->field.cqe_prev = (elm);		\
+	(head)->cqh_first = (elm);					\
+} while (0)
+
+#define CIRCLEQ_INSERT_TAIL(head, elm, field) do {			\
+	(elm)->field.cqe_next = CIRCLEQ_END(head);			\
+	(elm)->field.cqe_prev = (head)->cqh_last;			\
+	if ((head)->cqh_first == CIRCLEQ_END(head))			\
+		(head)->cqh_first = (elm);				\
+	else								\
+		(head)->cqh_last->field.cqe_next = (elm);		\
+	(head)->cqh_last = (elm);					\
+} while (0)
+
+#define	CIRCLEQ_REMOVE(head, elm, field) do {				\
+	if ((elm)->field.cqe_next == CIRCLEQ_END(head))			\
+		(head)->cqh_last = (elm)->field.cqe_prev;		\
+	else								\
+		(elm)->field.cqe_next->field.cqe_prev =			\
+		    (elm)->field.cqe_prev;				\
+	if ((elm)->field.cqe_prev == CIRCLEQ_END(head))			\
+		(head)->cqh_first = (elm)->field.cqe_next;		\
+	else								\
+		(elm)->field.cqe_prev->field.cqe_next =			\
+		    (elm)->field.cqe_next;				\
+} while (0)
+
+#define CIRCLEQ_REPLACE(head, elm, elm2, field) do {			\
+	if (((elm2)->field.cqe_next = (elm)->field.cqe_next) ==		\
+	    CIRCLEQ_END(head))						\
+		(head).cqh_last = (elm2);				\
+	else								\
+		(elm2)->field.cqe_next->field.cqe_prev = (elm2);	\
+	if (((elm2)->field.cqe_prev = (elm)->field.cqe_prev) ==		\
+	    CIRCLEQ_END(head))						\
+		(head).cqh_first = (elm2);				\
+	else								\
+		(elm2)->field.cqe_prev->field.cqe_next = (elm2);	\
+} while (0)
+
+#endif	/* !_SYS_QUEUE_H_ */
-- 
1.8.4.2




More information about the sssd-devel mailing list