[cobbler] Assigning a system to a profile

Dan White ygor at comcast.net
Tue Mar 19 17:33:51 UTC 2013


So what is happening that should not happen ? 

Contrarywise, what is not happening that should ? 


“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.” 
Bill Waterson (Calvin & Hobbes) 

----- Original Message -----
From: "Sam Sen" <ssen at ariasystems.com> 
To: "cobbler mailing list" <cobbler at lists.fedorahosted.org> 
Sent: Tuesday, March 19, 2013 1:22:47 PM 
Subject: Re: [cobbler] Assigning a system to a profile 




It’s there … 





[root at phl-00-cobbler iso]# cobbler profile list 

ORACLE 






Regards, 



Sam 





From: cobbler-bounces at lists.fedorahosted.org [mailto:cobbler-bounces at lists.fedorahosted.org] On Behalf Of Dan White 
Sent: Tuesday, March 19, 2013 1:12 PM 
To: cobbler mailing list 
Subject: Re: [cobbler] Assigning a system to a profile 




What does the command "cobbler profile list" return ? 

If one of the lines is not "ORACLE", then that is your first problem. 


“Sometimes I think the surest sign that intelligent life exists elsewhere in the universe is that none of it has tried to contact us.” 
Bill Waterson (Calvin & Hobbes) 


----- Original Message -----


From: "Sam Sen" < ssen at ariasystems.com > 
To: cobbler at lists.fedorahosted.org 
Sent: Tuesday, March 19, 2013 1:06:56 PM 
Subject: [cobbler] Assigning a system to a profile 




Not sure what I’m missing but I’m attempting to automatically install the OS with our new blade systems using a cobbler iso (generated by buildiso). The cobbler menu shows up with the list of available systems, but I want it to automatically install when it loads the ISO. I don’t have DHCP hence the use of the buildiso command. 



I added a new system by running the following command. Please note, the install works fine when I select the system but that’s not what I want. Notice I have the “mac” specified and I went as far as using the mac address of eth0 as the name for the system. Both times, I’m greeted with the menu and I’m forced to choose. 



cobbler system add --name=blade1 –mac=XX:XX:XX:XX:XX:XX --profile=ORACLE --interface=bond0 --interface-type=bond --bonding-opts="mode=6 miimon=1000" --ip-address=172.31.20.45 --hostname=blade1.domain.com --ksmeta='server_type=DB disk_layout=BLADES_ORACLE' --subnet=255.255.255.0 --gateway=172.31.20.250 --kopts='ksdevice=eth0 ip=172.31.20.45 netmask=255.255.255.0 dns=172.31.10.220 gateway=172.31.20.250' --static=1 







-- 

Sam Sen 

Sr Systems Administrator 

215.913.4797 



Aria Systems, Inc. 

600 Reed Road, Suite 302 

Broomall, PA 19008 

www.ariasystems.com 




_______________________________________________ 
cobbler mailing list 
cobbler at lists.fedorahosted.org 
https://lists.fedorahosted.org/mailman/listinfo/cobbler 
_______________________________________________ 
cobbler mailing list 
cobbler at lists.fedorahosted.org 
https://lists.fedorahosted.org/mailman/listinfo/cobbler 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.fedorahosted.org/pipermail/cobbler/attachments/20130319/1609e4a9/attachment.html>


More information about the cobbler mailing list