On Mon 01 Jun 2015 16:26:17 Frederic Muller wrote:
Hi!
I connect one of my machines to my TVs. I have noticed that since
sometimes along F21 updates the specific TV resolution could not longer
be activated. As it is definitely not a life threatening condition I
thought another update would fix it. Apparently the problem might lay
elsewhere...
So I have 2 TVs (with different resolution) to test. I start with cvt,
then xrandr --newmode, xrandr --addmode and then --output.
You should be getting EDID back from the screen that can be used to set the mode.
You should see the EDID with xrandr --verbose.
It is worth looking at the dmesg output to see it the kernel had a problem with the
connection.
There is a patch in kernel 4.1 that can help with EDID read problems that might be
what you are seeing. (Spec says 1 bytes read are good, but vendors sometimes
only work with 16 bytes read as that is what Windows does).
Barry