parted -l
Model: ATA SK hynix SC311 S (scsi)
Disk /dev/sdb: 512GB
Sector size (logical/physical): 512B/4096B
Partition Table: gpt
Disk Flags: pmbr_boot
Number Start End Size File system Name Flags
1 1049kB 787MB 786MB fat32 EFI system partition boot, esp
2 787MB 6156MB 5369MB fat32 Basic data partition msftres
3 6156MB 39.7GB 33.6GB linux-swap(v1) swap
4 39.7GB 40.2GB 524MB ext4 Boot0
5 40.2GB 145GB 105GB VolSys0 lvm
6 145GB 250GB 105GB VolUsr lvm
7 250GB 250GB 524MB ext4 Boot1
8 250GB 355GB 105GB VolSys1 lvm
9 355GB 460GB 105GB ext4 Backup0
Warning: The driver descriptor says the physical block size is 2048 bytes, but
Linux says it is 512 bytes.
Ignore/Cancel?
What should I do?
===========================================================================
Patrick DUPRÉ | | email: pdupre(a)gmx.com
Laboratoire interdisciplinaire Carnot de Bourgogne
9 Avenue Alain Savary, BP 47870, 21078 DIJON Cedex FRANCE
Tel: +33 (0)380395988
===========================================================================
Show replies by date