On 2020-03-23 at 12:22:09 Samuel Sieb wrote:
On 3/23/20 9:29 AM, Erik P. Olsen wrote:
> According to man logind.conf HandleLidSwitch=suspend is default. This does not
happen
> when I close the lid of my Lenovo T580. Directly setting HandleLidSwitch=suspend
has
> no effect either.
>
> Am I missing something or is it a bug?
There's an override in Gnome, but if you don't know about that, then
it's unlikely that you changed it.
If you watch the logs do you see anything about the lid switch getting
detected?
I don't use Gnome.
If you do "less /proc/bus/input/devices", is there an entry for the lid
switch? Mine looks like:
I: Bus=0019 Vendor=0000 Product=0005 Version=0000
N: Name="Lid Switch"
P: Phys=PNP0C0D/button/input0
S: Sysfs=/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
U: Uniq=
H: Handlers=event1
B: PROP=0
B: EV=21
B: SW=1
Yes, I have this entry.
# evtest /dev/input/event1
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x5 version 0x0
Input device name: "Lid Switch"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 0 (SW_LID) state 0
Properties:
Testing ... (interrupt to exit)
Event: time 1584991242.526727, type 5 (EV_SW), code 0 (SW_LID), value 1
Event: time 1584991242.526727, -------------- SYN_REPORT ------------
Event: time 1584991245.994142, type 5 (EV_SW), code 0 (SW_LID), value 0
Event: time 1584991245.994142, -------------- SYN_REPORT ------------
[erik@Erik-PC ~]$ sudo evtest /dev/input/event1
Input driver version is 1.0.1
Input device ID: bus 0x19 vendor 0x0 product 0x5 version 0x0
Input device name: "Lid Switch"
Supported events:
Event type 0 (EV_SYN)
Event type 5 (EV_SW)
Event code 0 (SW_LID) state 0
Properties:
Testing ... (interrupt to exit)
But I don't see any event.
--
Erik P. Olsen - Copenhagen, Denmark
Fedora 31/64 bit Linux xfce Claws-Mail POP3 Gramps 5.1.2 Bacula 9.4.4