Hi. I haven't been here for a long time, which I guess is a testament to how well Fedora works these days.
I have a new laptop, set up with Windows, that I'm trying to install F38 on. I used the media writer to make a USB boot/install drive. It booted fine, and I clicked to install to hard drive.
I took about half of the 1TB SSD for Fedora, and told it to continue. Then I left for a few minutes. When I came back, the computer had booted to the USB drive again (it appeared). I removed the USB drive and rebooted again.
The system booted to Windows with no indication of a grub boot menu. The drive was missing the space I'd reclaimed, so clearly that worked, at least partly. But nothing I do seems to get it to boot linux or drop me at a grub menu.
When I boot off the usb drive, it works, but I don't see any linux-related files on the SSD. So basically it looks like the drive got partitioned, at least partly, and the install didn't run. So I'm trying to run the install again, but no combination of clicks is getting me what I want.
1) For "Installation Destination," I see "Error checking storage configuration." I click on that, and it has the one device for me to install to. At the bottom, it says "Error checking storage configuration." When I "click for details," I get
--- The following erros were encountered when checking your storage configuration. You can modify your storage layout or quit the installer.
Failed to find a suitable stage 1 device: EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type None.; EFI System Partition cannot be of type ntfs.; EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type ext4.; EFI System Partition must e mounted on one of /boot/efi.; EFI System Partition cannot be of type btrfs,; EFI System Partition must e mounted on one of /boot/efi. ----
If I then go into "BLIVET GUI PARTITIONING" I do see a Btrfs volume, labeled "fedora_locahost-live," of 460GB. It has "home" and "root" subvolumes. It has no mountpoints for / and /home, but I can add them. Still, I guess it wants me to tell it where to put /boot? What do I do?
For reference, when I look at the drive in BLIVET I see
device type format size label mountpoint nvme0n1p1 partition efi 100MiB nvme0n1p2 partition 16MiB nvme0n1p3 partition ntfs 491.34GiB nvme0n1p5 partition ext4 1024MiB fedora_localhost-live nvme0n1p4 partition ntfs 662MiB
So the overall picture I'm getting is that the first install didn't finish partitioning the drive (since I don't see anywhere for /boot) and didn't do any of the install. But a) I'm not really confident in that assessment b) I don't know what to do next, in any case. Is it nvwe0n1p2 where /boot was meant to go?
Thanks, Matt
On 7/13/23 11:33, Matt Morgan wrote:
If I then go into "BLIVET GUI PARTITIONING" I do see a Btrfs volume, labeled "fedora_locahost-live," of 460GB. It has "home" and "root" subvolumes. It has no mountpoints for / and /home, but I can add them. Still, I guess it wants me to tell it where to put /boot? What do I do?
For reference, when I look at the drive in BLIVET I see
device type format size label mountpoint nvme0n1p1 partition efi 100MiB nvme0n1p2 partition 16MiB nvme0n1p3 partition ntfs 491.34GiB nvme0n1p5 partition ext4 1024MiB fedora_localhost-live nvme0n1p4 partition ntfs 662MiB
Did something get mixed up there? I don't see any 460GB partition other than the windows one that is close to that. The p5 partition is what I would have expected to be /boot and it's even marked as ext4 which is correct for that. I don't know why btrfs label is on that one. The one marked "efi" is the one that should be at /boot/efi.
On Thu, 13 Jul 2023 14:33:04 -0400 Matt Morgan minxmertzmomo@gmail.com wrote:
Hi. I haven't been here for a long time, which I guess is a testament to how well Fedora works these days.
True.
I have a new laptop, set up with Windows, that I'm trying to install F38 on. I used the media writer to make a USB boot/install drive. It booted fine, and I clicked to install to hard drive.
Is this a live image? I thought that when they were installed, they just were copied directly onto the drive. I always use netinstall. But, wouldn't you still have to tell it which partitions or space to use, or does it automatically divine that the efi partition should be /boot/efi?
I took about half of the 1TB SSD for Fedora, and told it to continue. Then I left for a few minutes. When I came back, the computer had booted to the USB drive again (it appeared). I removed the USB drive and rebooted again.
I think something critical happened in those few minutes. :-)
The system booted to Windows with no indication of a grub boot menu. The drive was missing the space I'd reclaimed, so clearly that worked, at least partly. But nothing I do seems to get it to boot linux or drop me at a grub menu.
If it was installed while secure boot (UEFI) was active, it will only boot in UEFI mode. If the system doesn't know where /boot/efi is, it can't boot in UEFI mode.
When I boot off the usb drive, it works, but I don't see any linux-related files on the SSD. So basically it looks like the drive got partitioned, at least partly, and the install didn't run. So I'm trying to run the install again, but no combination of clicks is getting me what I want.
- For "Installation Destination," I see "Error checking storage
configuration." I click on that, and it has the one device for me to install to. At the bottom, it says "Error checking storage configuration." When I "click for details," I get
The following erros were encountered when checking your storage configuration. You can modify your storage layout or quit the installer.
Failed to find a suitable stage 1 device: EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type None.; EFI System Partition cannot be of type ntfs.; EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type ext4.; EFI System Partition must e mounted on one of /boot/efi.; EFI System Partition cannot be of type btrfs,; EFI System Partition must e mounted on one of /boot/efi.
This is because it can't find /boot/efi to boot in UEFI mode.
If I then go into "BLIVET GUI PARTITIONING" I do see a Btrfs volume, labeled "fedora_locahost-live," of 460GB. It has "home" and "root" subvolumes. It has no mountpoints for / and /home, but I can add them. Still, I guess it wants me to tell it where to put /boot? What do I do?
For reference, when I look at the drive in BLIVET I see
device type format size label mountpoint nvme0n1p1 partition efi 100MiB nvme0n1p2 partition 16MiB nvme0n1p3 partition ntfs 491.34GiB nvme0n1p5 partition ext4 1024MiB fedora_localhost-live nvme0n1p4 partition ntfs 662MiB
So the overall picture I'm getting is that the first install didn't finish partitioning the drive (since I don't see anywhere for /boot) and didn't do any of the install. But a) I'm not really confident in that assessment b) I don't know what to do next, in any case. Is it nvwe0n1p2 where /boot was meant to go?
I don't know windows, but I have heard that there is sometimes a recovery partition that you wouldn't want to clobber, could that be p4? Or maybe that is p2? If it is p4, maybe that is the reason that it wasn't allocated as btrfs, and so the fs type was left as ntfs. If p4 is actually the install space for / in Fedora, you could boot the live image, and use gdisk (or fdisk) to remove the above partitions in the space you want to use for Fedora. I think that would be p5 and p4 (if it isn't windows recovery). Then, try to install from the live image again, but be sure to assign /boot/efi to the existing efi partition for windows so both fedora and windows can boot from it.
An alternative if the above doesn't work. I haven't used the netinstall for a while, and it isn't live, but it allows for custom partitioning, which seems to be what you need. I think it is still hub and spoke; there are discussions of some kind of html anaconda interface, but I don't think it is default yet. If it is still hub and spoke, you would select the custom partitioning spoke and tell it to use the existing efi partition as /boot/efi, and then allocate the rest for /boot and /. On the scheme above it looks like, as Samuel said, /boot would be assigned to p5 and / would be assigned to p4, if it isn't the windows recovery partition.
Then, because a netinstall is minimal (runlevel multiuser), you could ask it to install the desktop that you actually want to use as part of the install so it would boot to graphical. The first option will be easier if it works.
El 13/7/23 a las 20:33, Matt Morgan escribió:
Hi. I haven't been here for a long time, which I guess is a testament to how well Fedora works these days.
I have a new laptop, set up with Windows, that I'm trying to install F38 on. I used the media writer to make a USB boot/install drive. It booted fine, and I clicked to install to hard drive.
I took about half of the 1TB SSD for Fedora, and told it to continue. Then I left for a few minutes. When I came back, the computer had booted to the USB drive again (it appeared). I removed the USB drive and rebooted again.
The system booted to Windows with no indication of a grub boot menu. The drive was missing the space I'd reclaimed, so clearly that worked, at least partly. But nothing I do seems to get it to boot linux or drop me at a grub menu.
When I boot off the usb drive, it works, but I don't see any linux-related files on the SSD. So basically it looks like the drive got partitioned, at least partly, and the install didn't run. So I'm trying to run the install again, but no combination of clicks is getting me what I want.
- For "Installation Destination," I see "Error checking storage
configuration." I click on that, and it has the one device for me to install to. At the bottom, it says "Error checking storage configuration." When I "click for details," I get
The following erros were encountered when checking your storage configuration. You can modify your storage layout or quit the installer.
Failed to find a suitable stage 1 device: EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type None.; EFI System Partition cannot be of type ntfs.; EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type ext4.; EFI System Partition must e mounted on one of /boot/efi.; EFI System Partition cannot be of type btrfs,; EFI System Partition must e mounted on one of /boot/efi.
If I then go into "BLIVET GUI PARTITIONING" I do see a Btrfs volume, labeled "fedora_locahost-live," of 460GB. It has "home" and "root" subvolumes. It has no mountpoints for / and /home, but I can add them. Still, I guess it wants me to tell it where to put /boot? What do I do?
For reference, when I look at the drive in BLIVET I see
device type format size label mountpoint nvme0n1p1 partition efi 100MiB nvme0n1p2 partition 16MiB nvme0n1p3 partition ntfs 491.34GiB nvme0n1p5 partition ext4 1024MiB fedora_localhost-live nvme0n1p4 partition ntfs 662MiB
So the overall picture I'm getting is that the first install didn't finish partitioning the drive (since I don't see anywhere for /boot) and didn't do any of the install. But a) I'm not really confident in that assessment b) I don't know what to do next, in any case. Is it nvwe0n1p2 where /boot was meant to go?
Thanks, Matt
It seems you burned the Fedora Live image in your NVMe 0 Namespace 1 Partition 5 as seen in
nvme0n1p5 partition ext4 1024MiB fedora_localhost-live
You must burn it to an external USB drive (ej /dev/sdx) and boot for it.
If you reserved half disk (eg 500Gb) but later burn the image in I think is normal whats is seen in this partition list.
Hope helps
El 15/7/23 a las 12:02, José María Terry Jiménez via users escribió:
It seems you burned the Fedora Live image in your NVMe 0 Namespace 1 Partition 5 as seen in
nvme0n1p5 partition ext4 1024MiB fedora_localhost-live
You must burn it to an external USB drive (ej /dev/sdx) and boot for it.
If you reserved half disk (eg 500Gb) but later burn the image in I think is normal whats is seen in this partition list.
Hope helps
I mean boot FROM it, where FOR it (typo) sorry
On Thu, Jul 13, 2023 at 2:33 PM Matt Morgan minxmertzmomo@gmail.com wrote:
I have a new laptop, set up with Windows, that I'm trying to install F38 on. I used the media writer to make a USB boot/install drive. It booted fine, and I clicked to install to hard drive.
I took about half of the 1TB SSD for Fedora, and told it to continue. Then I left for a few minutes. When I came back, the computer had booted to the USB drive again (it appeared). I removed the USB drive and rebooted again.
The system booted to Windows with no indication of a grub boot menu. The drive was missing the space I'd reclaimed, so clearly that worked, at least partly. But nothing I do seems to get it to boot linux or drop me at a grub menu.
When I boot off the usb drive, it works, but I don't see any linux-related files on the SSD. So basically it looks like the drive got partitioned, at least partly, and the install didn't run. So I'm trying to run the install again, but no combination of clicks is getting me what I want.
- For "Installation Destination," I see "Error checking storage
configuration." I click on that, and it has the one device for me to install to. At the bottom, it says "Error checking storage configuration." When I "click for details," I get
The following erros were encountered when checking your storage configuration. You can modify your storage layout or quit the installer.
Failed to find a suitable stage 1 device: EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type None.; EFI System Partition cannot be of type ntfs.; EFI System Partition must be mounted on one of /boot/efi.; EFI System Partition cannot be of type ext4.; EFI System Partition must e mounted on one of /boot/efi.; EFI System Partition cannot be of type btrfs,; EFI System Partition must e mounted on one of /boot/efi.
etc.
I thought I'd follow up here and add that this computer had a bad motherboard. I got the computer replaced and the F38 install worked fine on the new one.
Best, Matt
-
José María Terry Jiménez -
Matt Morgan -
Samuel Sieb -
stan