On Tue, 2008-10-28 at 00:23 -0500, Robert Nichols wrote:
Christopher A. Williams wrote:
> I recently bought a snazzy new 16GB USB pen drive from the local store -
> it was only $29! I have several drives that are 8GB and smaller from the
> same store that are the same brand.
>
> Imagine my surprise when:
> * The 16GB drive is not accessible on either F9 or F10 Snap 3
> * The 8GB drives all work just fine on both F9 and F10 Snap 3
> * The 16GB drive works fine on Windows XP
> * The 16GB drive also works on a Windows XP VM running on top of F9!!!
>
<snip...>
I've seen several USB pen drives with inconsistent partition
tables,
such as a CHS geometry that leaves a few unallocated sectors (no great
surprise) but a partition with a sector count that goes beyond the
claimed last cylinder and does use the entire device. Automount is
deliberately made sensitive to such anomalies.
Take a look at what "fdisk -l" and "fsck.msdos" have to say about
the
drive. Errors such as "Partition has different physical/logical
endings" should be cause for concern. You might need to repartition
the device and/or rebuild the filesystem.
Thanks - This made complete sense to me - and you were right! Here's the
output of fdisk:
Disk /dev/sdb: 16.0 GB, 16039018496 bytes
75 heads, 40 sectors/track, 10442 cylinders
Units = cylinders of 3000 * 512 = 1536000 bytes
Disk identifier: 0xc3072e18
Device Boot Start End Blocks Id System
/dev/sdb1 * 1 10443 15663084 c W95 FAT32 (LBA)
...And here's a summary of what fsck.msdos said:
dosfsck 2.11, 12 Mar 2005, FAT32, LFN
There are differences between boot sector and its backup.
Differences: (offset:original/backup)
0:eb/00, 1:58/00, 2:90/00, 3:4d/00, 4:53/00, 5:44/00, 6:4f/00, 7:53/00
, 8:35/00, 9:2e/00, 10:30/00, 12:02/00, 13:10/00, 14:24/00, 16:02/00
...
, 497:74/00, 498:0d/00, 499:0a/00, 505:ac/00, 506:cb/00, 507:d8/00
, 510:55/00, 511:aa/00
1) Copy original to backup
2) Copy backup to original
3) No action
?
...followed by messages about cluster size mismatches, and the like.
So I repartitioned and re-formatted the drive (had to use my Windows XP
VM for that - see question below), and voila!
Now, one last question: what's the flag to format a FAT32 partition with
mkfs? I saw options for pretty much everything but that. I'm probably
just suffering from not having had my first cup of coffee... :)
Cheers,
Chris
--
==================================
By all means marry;
If you get a good wife, you'll be happy.
If you get a bad one, you'll become a philosopher.
--Socrates