Just uses create a mirror of a system I'm running. May help?! -- gary
## Add the new disk to the system
this example assumes a /dev/sda and (new) /dev/sdb
sda has 3 partitions, 1 swap, /boot, /. / and /boot are ext3 fstype.
## create new partition on new disk
parted (you need to set the partition type as gpt)
mkpart
## (model after target disk only larger, note: change the names (labels)
## create 3 partition /, /boot, swap)
## make filesystem and copy
mkfs.ext3 /dev/sdb3
mount /dev/sdb3 /mnt
cd /
find . -xdev | cpio -pdumv /mnt
umount /mnt
mkfs.ext3 /dev/sdb1
mount /dev/sdb1 /mnt
cd /boot
find . -xdev | cpio -pdumv /mnt
umount /mnt
## mbr copy
dd if=/dev/sda of=/dev/sdb bs=446 count=1
## fix grub
## boot fc11 recovery dvd
## (need newer grub for gpt partition tables)
## assumes your first partition has grub installed on it
grub
root (hd0,0)
setup (hd0)
exit
On Tue, Feb 23, 2010 at 9:05 AM, Bill Davidsen <davidsen(a)tmr.com> wrote:
stefan riemens wrote:
> I use plain and simple dd from a livecd for this purpose.. Make sure
> you get the devices correct though! After dd has finished, you can use
> gparted to grow you partitions (or system-config-lvm in case of lvm).
> Alternatively, if you want to rearrange your partitions, you could
> create a partition table seperately, and then copy individual
> partiations over using dd. For that to work however, I suspect you
> need to make sure you only have a partition table, rather then
> complete filesystems.
>
You have missed the point of the more complex process I described, a dd copy
gets you no better than you had (slowly). By tuning the filesystem options to
the intended use a significant improvement in performance can be obtained.
> Good luck!
> Stefan
>
> 2010/2/20, Bill Davidsen <davidsen(a)tmr.com>:
>> Jatin K wrote:
>>> Dear list
>>>
>>> I'm using FC 12 x86_64 on my dell vostro 1520 notebook with 160GB hdd
>>> installed in it , now I want to upgrade the hdd from 160GB to 320GB
>>> 7200 RPM
>>>
>>> is it possible to transfer fedora 12 from one hdd to another ?? I dont
>>> want to re-install it as lots of software and configurations are there
>>> in old one
>>>
>>> is there any way like ghost ( like in M$ environment ) for Linux or may
>>> be something like that
>>>
>> If you just want more space, there are several things already mentioned
>> which
>> will work. If you want to get best performance you will have to manually
>> build
>> the new layout. If you have some application or data which is taking most of
>> the
>> space, like MP3, flash clips, pictures or movies, you will get better
>> performance putting them in a filesystem tuned to the file size involved,
>> and if
>> you have a huge number of small files you might consider a filesystem other
>> than
>> ext4 default, either something else or some of the neat extended options
>> which
>> can make things faster.
>>
>> For "more of the same" there are a number of solutions, read the
suggestions
>> you
>> have and choose.
>>
--
Bill Davidsen <davidsen(a)tmr.com>
"We have more to fear from the bungling of the incompetent than from
the machinations of the wicked." - from Slashdot
--
users mailing list
users(a)lists.fedoraproject.org
To unsubscribe or change subscription options:
https://admin.fedoraproject.org/mailman/listinfo/users
Guidelines:
http://fedoraproject.org/wiki/Mailing_list_guidelines