Timothy Murphy wrote:
In my case this caused a slight problem,
as I had assigned the 192.168.1.0 network for the link to the network,
and so could not access my Linksys from the network.
I had to use a detached laptop to link to the Linksys (at 192.168.1.1)
and then change the IP address of the Linksys (to 192.168.2.15).
This was actually a Linksys WRT54GL,
which has been running under dd-wrt perfectly for a couple of years.
You could have accessed it over the network - you just needed to add
a route for it. You could have added one for the host, or for the
route add -host 192.168.1.1 eth0
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
Do not meddle in the affairs of dragons,
for thou art crunchy and taste good with Ketchup!