Linux version 2.6.17-1.2174_FC5 (brewbuilder@hs20-bc2-3.build.redhat.com) (gcc version 4.1.1 20060525 (Red Hat 4.1.1-1)) #1 Tue Aug 8 15:30:55 EDT 2006 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 00000000000a0000 (usable) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000001fff0000 (usable) BIOS-e820: 000000001fff0000 - 000000001fff3000 (ACPI NVS) BIOS-e820: 000000001fff3000 - 0000000020000000 (ACPI data) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) 0MB HIGHMEM available. 511MB LOWMEM available. Using x86 segment limits to approximate NX protection DMI 2.2 present. ACPI: PM-Timer IO Port: 0x4008 Allocating PCI resources starting at 30000000 (gap: 20000000:dec00000) Built 1 zonelists Kernel command line: ro root=LABEL=/ console=ttyS0,115200n8 console=tty0 Found and enabled local APIC! Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 CPU 0 irqstacks, hard=c075c000 soft=c075b000 PID hash table entries: 2048 (order: 11, 8192 bytes) Detected 1670.763 MHz processor. Using pmtmr for high-res timesource Console: colour VGA+ 80x25 Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) Memory: 514312k/524224k available (2068k kernel code, 9324k reserved, 1127k data, 216k init, 0k highmem) Checking if this processor honours the WP bit even in supervisor mode... Ok. Calibrating delay using timer specific routine.. 3344.65 BogoMIPS (lpj=6689301) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Mount-cache hash table entries: 512 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 256K (64 bytes/line) Intel machine check architecture supported. Intel machine check reporting enabled on CPU#0. CPU: AMD Athlon(tm) XP 2000+ stepping 02 Checking 'hlt' instruction... OK. ACPI: setting ELCR to 0200 (from 1e20) checking if image is initramfs... it is Freeing initrd memory: 910k freed NET: Registered protocol family 16 ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfb3b0, last bus=2 Setting up standard PCI resources ACPI: Subsystem revision 20060127 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI quirk: region 4000-407f claimed by vt8235 PM PCI quirk: region 5000-500f claimed by vt8235 SMB ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 11 *12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [ALKA] (IRQs 20) *0, disabled. ACPI: PCI Interrupt Link [ALKB] (IRQs 21) *0, disabled. ACPI: PCI Interrupt Link [ALKC] (IRQs 22) *0, disabled. ACPI: PCI Interrupt Link [ALKD] (IRQs 23) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 14 devices usbcore: registered new driver usbfs usbcore: registered new driver hub PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report pnp: 00:02: ioport range 0x4000-0x407f could not be reserved pnp: 00:02: ioport range 0x5000-0x500f has been reserved PCI: Bridge: 0000:00:01.0 IO window: 9000-9fff MEM window: e0000000-e1ffffff PREFETCH window: d8000000-dfffffff PCI: Bus 2, cardbus bridge: 0000:00:0a.0 IO window: 00001000-000010ff IO window: 00001400-000014ff PREFETCH window: 30000000-31ffffff MEM window: 32000000-33ffffff ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 12 ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12 NET: Registered protocol family 2 IP route cache hash table entries: 4096 (order: 2, 16384 bytes) TCP established hash table entries: 16384 (order: 6, 262144 bytes) TCP bind hash table entries: 8192 (order: 5, 163840 bytes) TCP: Hash tables configured (established 16384 bind 8192) TCP reno registered apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) apm: overridden by ACPI. audit: initializing netlink socket (disabled) audit(1162246597.704:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Initializing Cryptographic API ksign: Installing public key data Loading keyring - Added public key 159031EDF350496D - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: Fan [FAN] (on) ACPI: CPU0 (power states: C1[C1] C2[C2]) ACPI: Thermal Zone [THRM] (54 C) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 128M @ 0xd0000000 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 11 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xbc00-0xbc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xbc08-0xbc0f, BIOS settings: hdc:DMA, hdd:DMA hda: SAMSUNG SP8004H, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: SAMSUNG CD-R/RW SW-252B, ATAPI CD/DVD-ROM drive hdd: ATAPI DVD DUAL 8X4X12, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156368016 sectors (80060 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) hda: cache flushes supported hda: hda1 hda2 hdc: ATAPI 52X CD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 8192kB Cache, UDMA(33) ide-floppy driver 0.99.newide ACPI: PCI Interrupt 0000:00:0a.0[A] -> Link [LNKC] -> GSI 12 (level, low) -> IRQ 12 Yenta: CardBus bridge found at 0000:00:0a.0 [1154:030a] Yenta: ISA IRQ mask 0x0000, PCI irq 12 Socket status: 30000810 usbcore: registered new driver libusual usbcore: registered new driver hiddev usbcore: registered new driver usbhid drivers/usb/input/hid-core.c: v2.6:USB HID core driver PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 4.39 TCP bic registered Initializing IPsec netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Processor cpuid 662 not supported Using IPI Shortcut mode ACPI wakeup devices: PCI0 USB0 USB1 USB2 USB6 USB7 USB8 USB9 LAN0 UAR1 LPT1 ACPI: (supports S0 S1 S4 S5) Freeing unused kernel memory: 216k freed Write protecting the kernel read-only data: 705k input: AT Translated Set 2 keyboard as /class/input/input0 pccard: PCMCIA card inserted into slot 0 EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: hda1: orphan cleanup on readonly fs EXT3-fs: hda1: 4 orphan inodes deleted EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks audit(1162246606.476:2): selinux=0 auid=4294967295 audit(1162239426.258:3): audit_pid=1904 old=0 by auid=4294967295 BUG: unable to handle kernel NULL pointer dereference at virtual address 00000000 printing eip: c0600b11 *pde = 0f3fb067 Oops: 0002 [#1] last sysfs file: /class/drm/card0/dev Modules linked in: radeon drm ipv6 autofs4 hidp rfcomm l2cap bluetooth arc4 ieee80211_crypt_wep dm_mirror dm_mod video button battery ac lp parport_pc parport floppy bt878 tuner tvaudio msp3400 orinoco_cs dvb_ttpci orinoco l64781 hermes snd_bt87x bttv saa7146_vv snd_seq_dummy video_buf saa7146 snd_seq_oss ir_common i2c_viapro ehci_hcd hostap_cs snd_seq_midi_event v4l1_compat ves1820 stv0299 compat_ioctl32 i2c_algo_bit v4l2_common btcx_risc tveeprom snd_via82xx gameport via_ircc uhci_hcd ohci1394 hostap ieee80211_crypt snd_seq dvb_core tda8083 stv0297 sp8870 ves1x93 ttpci_eeprom ieee1394 serio_raw snd_pcm_oss i2c_core videodev snd_mixer_oss snd_ac97_codec snd_ac97_bus snd_mpu401_uart via_rhine mii irda crc_ccitt snd_pcm snd_rawmidi snd_seq_device snd_timer snd_page_alloc snd soundcore ext3 jbd CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010202 (2.6.17-1.2174_FC5 #1) EIP is at cond_resched+0x1/0x30 eax: 00000246 ebx: dea17378 ecx: 00000000 edx: 000005b8 esi: 00e48171 edi: dfcfd400 ebp: 000001c9 esp: d088ee30 ds: 007b es: 007b ss: 0068 Process captmon2 (pid: 28823, threadinfo=d088e000 task=d26b2550) Stack: 00000000 c045dbe8 00001000 00000005 00000018 00e4800d 00000000 dfdb1040 def7f650 00001000 00e48171 dfcfd400 000001c9 e088b634 00001000 dfcfd458 d088eea8 c042f6b2 d088eea8 dfcfd46c 00000000 dc009240 00000001 d088eef4 Call Trace: __getblk+0x39/0x255 __ext3_get_inode_loc+0x10a/0x2fb [ext3] debug_mutex_add_waiter+0x1c/0x2c ext3_reserve_inode_write+0x20/0x80 [ext3] ext3_orphan_add+0xf1/0x221 [ext3] ext3_mark_inode_dirty+0x38/0x3f [ext3] ext3_unlink+0x13e/0x18c [ext3] vfs_unlink+0xa5/0xdf do_unlinkat+0x90/0x124 do_syscall_trace+0x126/0x16d syscall_call+0x7/0xb Code: b1 a7 e1 ff eb 0a b8 20 94 76 c0 e8 f2 1f 00 00 b8 00 f0 ff ff 21 e0 8b 40 08 a8 08 0f 85 d9 fa ff ff 8d 65 f4 5b 5e 5f 5d c3 55 00 f0 ff ff 21 e2 8b 42 08 89 e5 a8 08 74 0f 83 7a 14 00 75 EIP: [] cond_resched+0x1/0x30 SS:ESP 0068:d088ee30 BUG: warning at kernel/exit.c:855/do_exit() (Not tainted) do_exit+0x55/0x768 die+0x27b/0x2a0 do_page_fault+0x443/0x5ad do_page_fault+0x0/0x5ad error_code+0x4f/0x54 cond_resched+0x1/0x30 __getblk+0x39/0x255 __ext3_get_inode_loc+0x10a/0x2fb [ext3] debug_mutex_add_waiter+0x1c/0x2c ext3_reserve_inode_write+0x20/0x80 [ext3] ext3_orphan_add+0xf1/0x221 [ext3] ext3_mark_inode_dirty+0x38/0x3f [ext3] ext3_unlink+0x13e/0x18c [ext3] vfs_unlink+0xa5/0xdf do_unlinkat+0x90/0x124 do_syscall_trace+0x126/0x16d syscall_call+0x7/0xb BUG: captmon2/28823, lock held at task exit time! [db708694] {inode_init_once} .. held by: captmon2:28823 [d26b2550, 125] ... acquired at: do_unlinkat+0x5a/0x124