Hi,

I'm having some problems during the boot process on a new HP laptop Model 15-da0113ns. Boots fine, seems to recognize a bunch of stuff and then in starts spitting these messages in rdsosreport.txt:

[  143.674617] localhost dracut-initqueue[940]: Warning: dracut-initqueue timeout - starting timeout scripts

Until it ends with these messages:

[  207.080978] localhost dracut-initqueue[940]: Warning: Could not boot.
[  207.116571] localhost systemd[1]: Starting Setup Virtual Console...
[  207.121579] localhost systemd[1]: Started Setup Virtual Console.

There there are some systemd output and finally:

[ 1328.177202] localhost kernel: usb 1-1: new high-speed USB device number 5 using xhci_hcd
[ 1328.308719] localhost kernel: usb 1-1: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
[ 1328.308727] localhost kernel: usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 1328.308732] localhost kernel: usb 1-1: Product: DataTraveler 2.0
[ 1328.308736] localhost kernel: usb 1-1: Manufacturer: Kingston
[ 1328.308740] localhost kernel: usb 1-1: SerialNumber: C86000BDBF50EDC1FA2B0129
[ 1328.310227] localhost kernel: usb-storage 1-1:1.0: USB Mass Storage device detected
[ 1328.310741] localhost kernel: scsi host3: usb-storage 1-1:1.0
[ 1329.395620] localhost kernel: scsi 3:0:0:0: Direct-Access     Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
[ 1329.396546] localhost kernel: sd 3:0:0:0: Attached scsi generic sg1 type 0
[ 1330.954660] localhost kernel: sd 3:0:0:0: [sdb] 60978816 512-byte logical blocks: (31.2 GB/29.1 GiB)
[ 1330.954826] localhost kernel: sd 3:0:0:0: [sdb] Write Protect is off
[ 1330.954831] localhost kernel: sd 3:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 1330.954996] localhost kernel: sd 3:0:0:0: [sdb] No Caching mode page found
[ 1330.955000] localhost kernel: sd 3:0:0:0: [sdb] Assuming drive cache: write through
[ 1330.977538] localhost kernel:  sdb: sdb1
[ 1330.979103] localhost kernel: sd 3:0:0:0: [sdb] Attached SCSI removable disk
[ 1333.967026] localhost multipath[4387]: sdb: can't store path info
[ 1333.967904] localhost multipathd[923]: sdb: add path (uevent)
[ 1333.968970] localhost multipathd[923]: uevent trigger error
[ 1383.268380] localhost kernel: FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.

I get the same thing with different usb-sticks. I'm a bit lost.

Kind regards,
--
Martín Marqués
It’s not that I have something to hide,
it’s that I have nothing I want you to see