SysRq : Trigger a crashdump Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:08:59 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb ignore_loglevel console=ttyS0,57600n8 irqpoll maxcpus=1 memmap=exactmap memmap=640K@0K memmap=261488K@17024K elfcorehdr=278512K memmap=56K#1048320K memmap=136K#1048376K BIOS-provided physical RAM map: BIOS-e820: 0000000000000100 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) Entering add_active_range(0, 1, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262080) 1 entries of 3200 used end_pfn_map = 1048576 user-defined physical RAM map: user: 0000000000000000 - 00000000000a0000 (usable) user: 00000000010a0000 - 0000000010ffc000 (usable) user: 000000003ffc0000 - 000000003ffce000 (ACPI data) user: 000000003ffce000 - 000000003fff0000 (ACPI data) Entering add_active_range(0, 0, 160) 0 entries of 3200 used Entering add_active_range(0, 4256, 69628) 1 entries of 3200 used end_pfn_map = 262128 DMI 2.3 present. ACPI: RSDP 000FB6C0, 0024 (r2 ACPIAM) ACPI: XSDT 3FFC0100, 0044 (r1 A M I OEMXSDT 1000606 MSFT 97) ACPI: FACP 3FFC0290, 00F4 (r3 A M I OEMFACP 1000606 MSFT 97) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 00000000000044A0/0 [20070126] ACPI: DSDT 3FFC03F0, 449D (r1 S0024 S0024001 1 INTL 2002026) ACPI: FACS 3FFCE000, 0040 ACPI: APIC 3FFC0390, 005C (r1 A M I OEMAPIC 1000606 MSFT 97) ACPI: OEMB 3FFCE040, 0063 (r1 A M I AMI_OEM 1000606 MSFT 97) ACPI: MCFG 3FFC4890, 003C (r1 A M I OEMMCFG 1000606 MSFT 97) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-0000000010ffc000 Entering add_active_range(0, 0, 160) 0 entries of 3200 used Entering add_active_range(0, 4256, 69628) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-0000000010ffc000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 160 0: 4256 -> 69628 On node 0 totalpages: 65532 DMA zone: 56 pages used for memmap DMA zone: 8 pages reserved DMA zone: 96 pages, LIFO batch:0 DMA32 zone: 895 pages used for memmap DMA32 zone: 64477 pages, LIFO batch:15 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 00000000000a0000 - 00000000010a0000 Allocating PCI resources starting at 40000000 (gap: 3fff0000:c0010000) SMP: Allowing 2 CPUs, 1 hotplug CPUs PERCPU: Allocating 40968 bytes of per cpu data Built 1 zonelists. Total pages: 64573 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb ignore_loglevel console=ttyS0,57600n8 irqpoll maxcpus=1 memmap=exactmap memmap=640K@0K memmap=261488K@17024K elfcorehdr=278512K memmap=56K#1048320K memmap=136K#1048376K debug: ignoring loglevel setting. Misrouted IRQ fixup and polling support enabled This may significantly impact system performance Initializing CPU#0 PID hash table entries: 1024 (order: 10, 8192 bytes) Extended CMOS year: 2000 time.c: Detected 1000.000 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ 280000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 248456k/278512k available (2366k kernel code, 13672k reserved, 1400k data, 312k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 2053.01 BogoMIPS (lpj=1026509) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 32768 (order: 6, 262144 bytes) Inode-cache hash table entries: 16384 (order: 5, 131072 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12500019 Detected 12.500 MHz APIC timer. Brought up 1 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2048 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 PCI: PXH quirk detected, disabling MSI for SHPC device ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.P4P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 *17 18 19) ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 *18 19) ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 *19) ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 *22) ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 *21 22) ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs *20 21 22) ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 *22) ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *0, disabled. Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 16 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:07: iomem range 0xffb80000-0xfffffffe has been reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:08: iomem range 0xfec00000-0xfec00fff has been reserved pnp: 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:0c: ioport range 0x290-0x297 has been reserved pnp: 00:0e: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0f: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0f: iomem range 0xc0000-0xdffff has been reserved pnp: 00:0f: iomem range 0xe0000-0xfffff has been reserved pnp: 00:0f: iomem range 0x100000-0x3fffffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: e000-efff MEM window: def00000-dfffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: dee00000-deefffff PREFETCH window: 40000000-400fffff PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: ded00000-dedfffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: d000-dfff MEM window: dec00000-decfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: d000-dfff MEM window: dec00000-decfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 2, 16384 bytes) TCP established hash table entries: 8192 (order: 5, 196608 bytes) TCP bind hash table entries: 8192 (order: 5, 131072 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 2882k freed audit: initializing netlink socket (disabled) audit(1191363831.202:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4A67DBB026B0246B - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 Boot video device is 0000:06:05.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0d: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K,PNP0f12:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Opteron(tm) Processor 144 processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 1060k <...some garbage...>Linux version 2.6.22.5-76.fc7 (kojibuilder@xenbuilder4.fedora.phx.redhat.com) (gcc version 4.1.2 20070502 (Red Hat 4.1.2-12)) #1 SMP Thu Aug 30 13:08:59 EDT 2007 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb ignore_loglevel console=ttyS0,57600n8 crashkernel=256M@16M BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e8000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) BIOS-e820: 000000003fff0000 - 0000000040000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262080) 1 entries of 3200 used end_pfn_map = 1048576 DMI 2.3 present. ACPI: RSDP 000FB6C0, 0024 (r2 ACPIAM) ACPI: XSDT 3FFC0100, 0044 (r1 A M I OEMXSDT 1000606 MSFT 97) ACPI: FACP 3FFC0290, 00F4 (r3 A M I OEMFACP 1000606 MSFT 97) ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 00000000000044A0/0 [20070126] ACPI: DSDT 3FFC03F0, 449D (r1 S0024 S0024001 1 INTL 2002026) ACPI: FACS 3FFCE000, 0040 ACPI: APIC 3FFC0390, 005C (r1 A M I OEMAPIC 1000606 MSFT 97) ACPI: OEMB 3FFCE040, 0063 (r1 A M I AMI_OEM 1000606 MSFT 97) ACPI: MCFG 3FFC4890, 003C (r1 A M I OEMMCFG 1000606 MSFT 97) Scanning NUMA topology in Northbridge 24 No NUMA configuration found Faking a node at 0000000000000000-000000003ffc0000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 262080) 1 entries of 3200 used Bootmem setup node 0 0000000000000000-000000003ffc0000 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1048576 early_node_map[2] active PFN ranges 0: 0 -> 159 0: 256 -> 262080 On node 0 totalpages: 261983 DMA zone: 56 pages used for memmap DMA zone: 1301 pages reserved DMA zone: 2642 pages, LIFO batch:0 DMA32 zone: 3527 pages used for memmap DMA32 zone: 254457 pages, LIFO batch:31 Normal zone: 0 pages used for memmap Nvidia board detected. Ignoring ACPI timer override. If you got timer trouble try acpi_use_timer_override ACPI: PM-Timer IO Port: 0x4008 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 1, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: BIOS IRQ0 pin2 override ignored. ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information swsusp: Registered nosave memory region: 000000000009f000 - 00000000000a0000 swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e8000 swsusp: Registered nosave memory region: 00000000000e8000 - 0000000000100000 Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) SMP: Allowing 2 CPUs, 1 hotplug CPUs PERCPU: Allocating 40968 bytes of per cpu data Built 1 zonelists. Total pages: 257099 Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb ignore_loglevel console=ttyS0,57600n8 crashkernel=256M@16M debug: ignoring loglevel setting. Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 time.c: Detected 1800.014 MHz processor. Console: colour VGA+ 80x25 Checking aperture... CPU 0: aperture @ 280000000 size 32 MB Aperture too small (32 MB) No AGP bridge found Memory: 762140k/1048320k available (2366k kernel code, 285792k reserved, 1400k data, 312k init) SLUB: Genslabs=23, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 Calibrating delay using timer specific routine.. 3601.10 BogoMIPS (lpj=1800552) Security Framework v1.0.0 initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) Inode-cache hash table entries: 65536 (order: 7, 524288 bytes) Mount-cache hash table entries: 256 CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 1024K (64 bytes/line) CPU 0/0 -> Node 0 SMP alternatives: switching to UP code ACPI: Core revision 20070126 Using local APIC timer interrupts. result 12500103 Detected 12.500 MHz APIC timer. Brought up 1 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=2048 bytes NET: Registered protocol family 16 ACPI: bus type pci registered PCI: BIOS Bug: MCFG area at e0000000 is not E820-reserved PCI: Not using MMCONFIG. PCI: Using configuration type 1 ACPI: Interpreter enabled ACPI: (supports S0 S1 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI: Transparent bridge - 0000:00:09.0 PCI: PXH quirk detected, disabling MSI for SHPC device ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4.P4P5._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *9 ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *10 ACPI: PCI Interrupt Link [LNKE] (IRQs 16 17 18 19) *0, disabled. ACPI: PCI Interrupt Link [LUS0] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LUS1] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LUS2] (IRQs 20 21 22) *5 ACPI: PCI Interrupt Link [LKLN] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LAUI] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKMO] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LKSM] (IRQs 20 21 22) *0, disabled. ACPI: PCI Interrupt Link [LTID] (IRQs 20 21 22) *9 ACPI: PCI Interrupt Link [LTIE] (IRQs 20 21 22) *11 ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22) *14 Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 15 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default ACPI: RTC can wake from S4 Time: tsc clocksource has been installed. pnp: 00:07: iomem range 0xffb80000-0xfffffffe could not be reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:07: iomem range 0x0-0x0 could not be reserved pnp: 00:08: iomem range 0xfec00000-0xfec00fff could not be reserved pnp: 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved pnp: 00:0b: ioport range 0x290-0x297 has been reserved pnp: 00:0d: iomem range 0xe0000000-0xefffffff has been reserved pnp: 00:0e: iomem range 0x0-0x9ffff could not be reserved pnp: 00:0e: iomem range 0xc0000-0xdffff has been reserved pnp: 00:0e: iomem range 0xe0000-0xfffff could not be reserved pnp: 00:0e: iomem range 0x100000-0x3fffffff could not be reserved PCI: Bridge: 0000:00:09.0 IO window: e000-efff MEM window: def00000-dfffffff PREFETCH window: 50000000-500fffff PCI: Bridge: 0000:00:0b.0 IO window: disabled. MEM window: dee00000-deefffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0c.0 IO window: disabled. MEM window: ded00000-dedfffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: d000-dfff MEM window: dec00000-decfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0d.0 IO window: d000-dfff MEM window: dec00000-decfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:0e.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Setting latency timer of device 0000:00:09.0 to 64 PCI: Setting latency timer of device 0000:00:0b.0 to 64 PCI: Setting latency timer of device 0000:00:0c.0 to 64 PCI: Setting latency timer of device 0000:00:0d.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:0e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 32768 (order: 6, 262144 bytes) TCP established hash table entries: 131072 (order: 9, 3145728 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 131072 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3848k freed audit: initializing netlink socket (disabled) audit(1191363873.954:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 4A67DBB026B0246B - User ID: Red Hat, Inc. (Kernel Module GPG key) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Found disabled HT MSI Mapping on 0000:00:0b.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0c.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0d.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Found disabled HT MSI Mapping on 0000:00:0e.0 PCI: Found enabled HT MSI Mapping on 0000:00:00.0 PCI: Setting latency timer of device 0000:00:0b.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0b.0:pcie00] PCI: Setting latency timer of device 0000:00:0c.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0c.0:pcie00] PCI: Setting latency timer of device 0000:00:0d.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0d.0:pcie00] PCI: Setting latency timer of device 0000:00:0e.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:0e.0:pcie00] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI Exception (processor_core-0781): AE_NOT_FOUND, Processor Device is not present [20070126] Generic RTC Driver v1.07 Non-volatile memory driver v1.2 Linux agpgart interface v0.102 (c) Dave Jones Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled ˙serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0c: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 16384K size 4096 blocksize input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1 PNP: PS/2 controller doesn't have AUX irq; using default 12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 powernow-k8: Found 1 AMD Opteron(tm) Processor 144 processors (version 2.00.00) powernow-k8: 0 : fid 0xa (1800 MHz), vid 0x6 powernow-k8: 1 : fid 0x2 (1000 MHz), vid 0x12 drivers/rtc/hctosys.c: unable to open rtc device (rtc0) Freeing unused kernel memory: 312k freed Write protecting the kernel read-only data: 1060k Red Hat nash version 6.0.9 starting Mounting proc filesystem Mounting sysfs filesystem Creating /dev Creating initial device nodes Setting up hotplug. Creating block device nodes. LoUSB Universal Host Controller Interface driver v3.0 ading uhci-hcd.ko module Loadinohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver g ohci-hcd.ko moACPI: PCI Interrupt Link [LUS0] enabled at IRQ 22 dule ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [LUS0] -> GSI 22 (level, low) -> IRQ 22 PCI: Setting latency timer of device 0000:00:02.0 to 64 ohci_hcd 0000:00:02.0: OHCI Host Controller ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 1 ohci_hcd 0000:00:02.0: irq 22, io mem 0xdebfc000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 10 ports detected Loading ehci-hcd.ko module ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21 ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [LUS2] -> GSI 21 (level, low) -> IRQ 21 PCI: Setting latency timer of device 0000:00:02.1 to 64 ehci_hcd 0000:00:02.1: EHCI Host Controller ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 2 ehci_hcd 0000:00:02.1: debug port 1 PCI: cache line size of 64 is not supported by device 0000:00:02.1 ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000 ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 10 ports detected input: ImPS/2 Generic Wheel Mouse as /class/input/input2 Loading mbcache.ko module Loading jbd.ko module Loading ext3.ko module Loading scsi_mod.ko module SCSI subsystem initialized Loading sd_mod.ko module Loading scsi_transport_spi.ko module Loading aic79xx.ko moduleACPI: PCI Interrupt Link [LNKD] enabled at IRQ 19 ACPI: PCI Interrupt 0000:03:04.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 scsi0 : Adaptec AIC79XX PCI-X SCSI HBA DRIVER, Rev 3.0 aic7901A: Ultra320 Wide Channel A, SCSI Id=7, PCI-X 67-100Mhz, 512 SCBs Loading shpchp.ko module shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 Loading libata.ko module libata version 2.21 loaded. Loading sata_nv.ko module sata_nv 0000:00:07.0: version 3.4 ACPI: PCI Interrupt Link [LTID] enabled at IRQ 20 ACPI: PCI Interrupt 0000:00:07.0[A] -> Link [LTID] -> GSI 20 (level, low) -> IRQ 20 sata_nv 0000:00:07.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:07.0 to 64 scsi1 : sata_nv scsi2 : sata_nv ata1: SATA max UDMA/133 cmd 0xffffc200005e6480 ctl 0xffffc200005e64a0 bmdma 0x0000000000019800 irq 20 ata2: SATA max UDMA/133 cmd 0xffffc200005e6580 ctl 0xffffc200005e65a0 bmdma 0x0000000000019808 irq 20 scsi 0:0:1:0: Direct-Access SEAGATE ST336754LC 0003 PQ: 0 ANSI: 3 target0:0:1: asynchronous scsi0:A:1:0: Tagged Queuing enabled. Depth 4 target0:0:1: Beginning Domain Validation target0:0:1: wide asynchronous target0:0:1: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63) target0:0:1: Ending Domain Validation scsi 0:0:2:0: Direct-Access SEAGATE ST336754LC 0003 PQ: 0 ANSI: 3 target0:0:2: asynchronous scsi0:A:2:0: Tagged Queuing enabled. Depth 4 target0:0:2: Beginning Domain Validation target0:0:2: wide asynchronous target0:0:2: FAST-160 WIDE SCSI 320.0 MB/s DT IU QAS RDSTRM WRFLOW PCOMP (6.25 ns, offset 63) target0:0:2: Ending Domain Validation ata1: SATA link down (SStatus 0 SControl 300) ata2: SATA link down (SStatus 0 SControl 300) ACPI: PCI Interrupt Link [LTIE] enabled at IRQ 22 ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [LTIE] -> GSI 22 (level, low) -> IRQ 22 sata_nv 0000:00:08.0: Using ADMA mode PCI: Setting latency timer of device 0000:00:08.0 to 64 scsi3 : sata_nv scsi4 : sata_nv ata3: SATA max UDMA/133 cmd 0xffffc200005e8480 ctl 0xffffc200005e84a0 bmdma 0x000000000001b400 irq 22 ata4: SATA max UDMA/133 cmd 0xffffc200005e8580 ctl 0xffffc200005e85a0 bmdma 0x000000000001b408 irq 22 ata3: SATA link down (SStatus 0 SControl 300) ata4: SATA link down (SStatus 0 SControl 300) Waiting for driver initialization. sd 0:0:1:0: [sda] 71687372 512-byte hardware sectors (36704 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: ab 00 10 08 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:1:0: [sda] 71687372 512-byte hardware sectors (36704 MB) sd 0:0:1:0: [sda] Write Protect is off sd 0:0:1:0: [sda] Mode Sense: ab 00 10 08 sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA sda: sda1 sda2 sd 0:0:1:0: [sda] Attached SCSI disk sd 0:0:2:0: [sdb] 71687372 512-byte hardware sectors (36704 MB) sd 0:0:2:0: [sdb] Write Protect is off sd 0:0:2:0: [sdb] Mode Sense: ab 00 10 08 sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sd 0:0:2:0: [sdb] 71687372 512-byte hardware sectors (36704 MB) sd 0:0:2:0: [sdb] Write Protect is off sd 0:0:2:0: [sdb] Mode Sense: ab 00 10 08 sd 0:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA sdb: sdb1 sdb2 sd 0:0:2:0: [sdb] Attached SCSI disk Loading pata_amd.ko module pata_amd 0000:00:06.0: version 0.3.8 PCI: Setting latency timer of device 0000:00:06.0 to 64 scsi5 : pata_amd scsi6 : pata_amd ata5: PATA max UDMA/133 cmd 0x00000000000101f0 ctl 0x00000000000103f6 bmdma 0x0000000000013000 irq 14 ata6: PATA max UDMA/133 cmd 0x0000000000010170 ctl 0x0000000000010376 bmdma 0x0000000000013008 irq 15 ata5.01: ATAPI: LITE-ON CD-ROM LTN-5291S, NS08, max UDMA/33 ata5.01: configured for UDMA/33 scsi 5:0:1:0: CD-ROM LITE-ON CD-ROM LTN-5291S NS08 PQ: 0 ANSI: 5 Waiting for driver initialization. Loading dm-mod.ko module device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.com Loading dm-mirror.ko module Loading dm-zero.ko module Loading dm-snapshot.ko module Making device-mapper control node Scanning logical volumes Reading all physical volumes. This may take a while... Found volume group "VolGroup00" using metadata type lvm2 Activating logical volumes 2 logical volume(s) in volume group "VolGroup00" now active Trying to resume from /dev/VolGroup00/LogVol01 No suspend signature on swap, not resuming. Creating root device. Mounting root filesystem. EXT3-fs: INFO: recovery required on readonly filesystem. EXT3-fs: write access will be enabled during recovery. kjournald starting. Commit interval 5 seconds EXT3-fs: recovery complete. EXT3-fs: mounted filesystem with ordered data mode. Setting up other filesystems. Setting up new root fs no fstab.sys, mounting internal defaults Switching to new root and running init. unmounting old /dev unmounting old /proc unmounting old /sys security: 3 users, 6 roles, 1827 types, 80 bools, 1 sens, 1024 cats security: 61 classes, 68491 rules SELinux: Completing initialization. SELinux: Setting up existing superblocks. SELinux: initialized (dev dm-0, type ext3), uses xattr SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts SELinux: initialized (dev devpts, type devpts), uses transition SIDs SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs SELinux: initialized (dev futexfs, type futexfs), uses genfs_contexts SELinux: initialized (dev anon_inodefs, type anon_inodefs), not configured for labeling SELinux: initialized (dev pipefs, type pipefs), uses task SIDs SELinux: initialized (dev sockfs, type sockfs), uses task SIDs SELinux: initialized (dev cpuset, type cpuset), uses genfs_contexts SELinux: initialized (dev proc, type proc), uses genfs_contexts SELinux: initialized (dev bdev, type bdev), uses genfs_contexts SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts audit(1191363903.172:2): policy loaded auid=4294967295 INIT: version 2.86 booting Welcome to Fedora Press 'I' to enter interactive startup. Setting clock (utc): Tue Oct 2 18:25:06 EDT 2007 [ OK ] Starting udev: sd 0:0:1:0: Attached scsi generic sg0 type 0 sd 0:0:2:0: Attached scsi generic sg1 type 0 scsi 5:0:1:0: Attached scsi generic sg2 type 5 sr0: scsi3-mmc drive: 0x/52x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 Floppy drive(s): fd0 is 1.44M sr 5:0:1:0: Attached scsi CD-ROM sr0 FDC 0 is a post-1991 82077 i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4c00 i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4c40 rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year, y3k parport_pc 00:06: reported by Plug and Play ACPI parport0: PC-style at 0x378, irq 7 [PCSPP] tg3.c:v3.77 (May 31, 2007) ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 ACPI: PCI Interrupt 0000:05:00.0[A] -> Link [LNKB] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:05:00.0 to 64 eth0: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:f2:d0:d9:2d eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth0: dma_rwctrl[76180000] dma_mask[64-bit] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 17 ACPI: PCI Interrupt 0000:04:00.0[A] -> Link [LNKA] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:04:00.0 to 64 eth1: Tigon3 [partno(BCM95721) rev 4101 PHY(5750)] (PCI Express) 10/100/1000Base-T Ethernet 00:15:f2:d0:d8:65 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[76180000] dma_mask[64-bit] QLogic Fibre Channel HBA Driver ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKD] -> GSI 19 (level, low) -> IRQ 19 qla2xxx 0000:03:00.0: Found an ISP2312, irq 19, iobase 0xffffc200005ea000 qla2xxx 0000:03:00.0: Configuring PCI space... qla2xxx 0000:03:00.0: Configure NVRAM parameters... qla2xxx 0000:03:00.0: Verifying loaded RISC code... qla2xxx 0000:03:00.0: Allocated (412 KB) for firmware dump... qla2xxx 0000:03:00.0: LIP reset occured (fd5a). scsi7 : qla2xxx qla2xxx 0000:03:00.0: QLogic Fibre Channel HBA Driver: 8.01.07-k7 QLogic QLA2340 - 133MHz PCI-X to 2Gb FC, Single Channel ISP2312: PCI-X (100 MHz) @ 0000:03:00.0 hdma-, host#=7, fw=3.03.20 IPX [ OK ] loop: module loaded qla2xxx 0000:03:00.0: LIP occured (f7f7). qla2xxx 0000:03:00.0: LOOP UP detected (2 Gbps). lp0: using parport0 (interrupt-driven). lp0: console ready Loading default keymap (us): [ OK ] Setting hostname don2: [ OK ] No dock devices found. input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] input: Power Button (CM) as /class/input/input4 ACPI: Power Button (CM) [PWRB] device-mapper: multipath: version 1.0.5 loaded scsi 7:0:0:0: Sequential-Access QUANTUM SDLT320 V62 PQ: 0 ANSI: 3 scsi 7:0:0:1: Medium Changer STK L700 3.05 PQ: 0 ANSI: 3 scsi 7:0:0:2: Sequential-Access IBM ULTRIUM-TD2 333K PQ: 0 ANSI: 3 scsi 7:0:0:3: Sequential-Access IBM ULTRIUM-TD2 333K PQ: 0 ANSI: 3 scsi 7:0:0:4: Sequential-Access IBM ULTRIUM-TD1 18N2 PQ: 0 ANSI: 3 scsi 7:0:0:5: Sequential-Access IBM ULTRIUM-TD1 18N2 PQ: 0 ANSI: 3 scsi 7:0:0:6: Sequential-Access IBM ULTRIUM-TD1 18N2 PQ: 0 ANSI: 3 scsi 7:0:0:7: Sequential-Access IBM ULTRIUM-TD1 18N2 PQ: 0 ANSI: 3 scsi 7:0:0:0: Attached scsi generic sg3 type 1 scsi 7:0:0:1: Attached scsi generic sg4 type 8 scsi 7:0:0:2: Attached scsi generic sg5 type 1 scsi 7:0:0:3: Attached scsi generic sg6 type 1 scsi 7:0:0:4: Attached scsi generic sg7 type 1 scsi 7:0:0:5: Attached scsi generic sg8 type 1 scsi 7:0:0:6: Attached scsi generic sg9 type 1 scsi 7:0:0:7: Attached scsi generic sg10 type 1 st: Version 20070203, fixed bufsize 32768, s/g segs 256 st 7:0:0:0: Attached scsi tape st0 st 7:0:0:0: st0: try direct i/o: yes (alignment 512 B) st 7:0:0:2: Attached scsi tape st1 st 7:0:0:2: st1: try direct i/o: yes (alignment 512 B) st 7:0:0:3: Attached scsi tape st2 st 7:0:0:3: st2: try direct i/o: yes (alignment 512 B) osst :I: Tape driver with OnStream support version 0.99.4 osst :I: $Id: osst.c,v 1.73 2005/01/01 21:13:34 wriede Exp $ st 7:0:0:4: Attached scsi tape st3 st 7:0:0:4: st3: try direct i/o: yes (alignment 512 B) st 7:0:0:5: Attached scsi tape st4 st 7:0:0:5: st4: try direct i/o: yes (alignment 512 B) st 7:0:0:6: Attached scsi tape st5 st 7:0:0:6: st5: try direct i/o: yes (alignment 512 B) st 7:0:0:7: Attached scsi tape st6 st 7:0:0:7: st6: try direct i/o: yes (alignment 512 B) Setting up Logical Volume Management: 2 logical volume(s) in volume group "VolGroup00" now active [ OK ] Checking filesystems Checking all file systems. [/sbin/fsck.ext3 (1) -- /] fsck.ext3 -a /dev/VolGroup00/LogVol00 /dev/VolGroup00/LogVol00: clean, 281817/8421376 files, 2220679/8413184 blocks [/sbin/fsck.ext3 (1) -- /boot] fsck.ext3 -a /dev/sda1 /boot: recovering journal /boot: clean, 39/26104 files, 25972/104388 blocks [ OK ] Remounting root filesystem in read-write mode: EXT3 FS on dm-0, internal journal [ OK ] Mounting local filesystems: kjournald starting. Commit interval 5 seconds EXT3 FS on sda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. SELinux: initialized (dev sda1, type ext3), uses xattr SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ OK ] Enabling local filesystem quotas: [ OK ] Enabling /etc/fstab swaps: Adding 2031608k swap on /dev/VolGroup00/LogVol01. Priority:-1 extents:1 across:2031608k [ OK ] SELinux: initialized (dev binfmt_misc, type binfmt_misc), uses genfs_contexts INIT: Entering runlevel: 5 Entering non-interactive startup Starting background readahead (early, fast mode): [ OK ] Checking for hardware changes [ OK ] Enabling ondemand cpu frequency scaling: [ OK ] Applying iptables firewall rules: ip_tables: (C) 2000-2006 Netfilter Core Team Netfilter messages via NETLINK v0.30. nf_conntrack version 0.5.0 (4095 buckets, 32760 max) [ OK ] Loading additional iptables modules: ip_conntrack_netbios_ns [ OK ] NET: Registered protocol family 10 lo: Disabled Privacy Extensions Mobile IPv6 Bringing up loopback interface: [ OK ] Bringing up interface eth0: Determining IP information for eth0...ADDRCONF(NETDEV_UP): eth0: link is not ready Marking TSC unstable due to cpufreq changes Time: acpi_pm clocksource has been installed. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready tg3: eth0: Link is down. tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is on for TX and on for RX. done. [ OK ] Starting auditd: audit(1191363929.780:3): audit_pid=2153 old=0 by auid=4294967295 subj=system_u:system_r:auditd_t:s0 [ OK ] Starting restorecond: [ OK ] Starting system logger: [ OK ] Starting kernel logger: [ OK ] Starting irqbalance: [ OK ] Starting mcstransd: [ OK ] Starting rpcbind: [ OK ] eth0: no IPv6 routers present Starting setroubleshootd: [ OK ] Starting NFS statd: [ OK ] Starting RPC idmapd: SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts [ OK ] Starting kdump:[ OK ] Starting system message bus: [ OK ] Mounting other filesystems: [ OK ] Starting PC/SC smart card daemon (pcscd): [ OK ] Starting hidd: Bluetooth: Core ver 2.11 NET: Registered protocol family 31 Bluetooth: HCI device and connection manager initialized Bluetooth: HCI socket layer initialized Bluetooth: L2CAP ver 2.8 Bluetooth: L2CAP socket layer initialized Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ OK ] Starting autofs: Loading autofs4: [ OK ] Starting automount: SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts SELinux: initialized (dev autofs, type autofs), uses genfs_contexts [ OK ] [ OK ] Starting hpiod: [ OK ] Starting hpssd: [ OK ] Starting sshd: [ OK ] ntpd: Synchronizing with time server: [ OK ] Starting ntpd: [ OK ] Starting postgresql service: [ OK ] Starting sendmail: [ OK ] Starting sm-client: [ OK ] Starting ConsoleKit: [ OK ] Starting crond: [ OK ] Enabling monthly Smolt checkin: [ OK ] Starting xfs: [ OK ] Starting anacron: [ OK ] Starting atd: [ OK ] Starting background readahead (later, fast mode): [ OK ] Starting dhcdbd:[ OK ] Starting Avahi daemon... [ OK ] Starting HAL daemon: [ OK ] Starting smartd: [ OK ]